vitbaq Goto Github PK

arduino-lmic

LoraWAN-in-C library, adapted to run under the Arduino environment

can-project

Esse repositório possui o objetivo de implementar em Verilog os módulos de CAN Decoder e BIT Timing.

chirpstack-application-server

ChirpStack Application Server is an open-source LoRaWAN application-server.

iwpand

802.15.4 user space daemon

json-rules-engine

A rules engine expressed in JSON

knot-babeltower

KNoT Protocol translator and orchestrator service

knot-cloud-sdk-c

knot-documentation

KNoT platform documentation

knot-fog-connector

KNoT fog connector with a cloud service

knot-gateway-buildroot

KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.

knot-gateway-netsetup

KNoT Gateway Network (OpenThread) setup service. Exports Bluetooth GATT service to allow users to setup openthread network parameters.

knot-gateway-webui

Repository for the Web User Interface to the KNoT Gateway based on angular and bootstrap

knot-hal-source

KNOT HAL is part of KNOT project. It aims to provide hardware abstraction layer for SPI and nRF24L01 radios. Allowing power constrained embedded devices to join a wireless network and exchange datagrams using nRF24L01 radios. The initial target platforms are Arduino (nodes), and Raspiberry PI GW. nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band. On a second project phase, other radio access technologies such as Bluetooth Low Energy, and Wi-Fi are planned.

knot-kegerator-thing

KNoT Kegerator embedded device

knot-network-nrf24

nRF24 user space daemon

knot-protocol-source

KNOT protocol library is a lightweight C library built to use minimal CPU and memory resources.

knot-service-source

KNoT Service is part of KNoT project. It aims to provide a "proxy" service between KNoT Things and KNoT Cloud, allowing power constrained embedded device to interact with cloud services. The initial target platform are PAN devices, and Raspberry Pi GW. The PAN device used is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band (NRF24L01). On a second project phase, other radio access technologies such as LPWAN devices, Mesh devices, 3G Devices, Bluetooth Low Energy Devices, and Wi-Fi Devices are planned.

knot-thing-simulator

knot-thing-source

KNoT Thing library is a lightweight C/C++ library built to use minimal CPU and memory resources. It is intended to run on KNoT Nodes (Things) (see KNoT Architecture for better understanding). It provides the Radio and Protocol abstractions for the application. The application builder just need implement the read/write functions for its sensors/actuators, register a Data Item (sensor or actuator) on the library and call the run() method on its main loop routine.

knot-virtualthing

KNoT VirtualThing

knot-zephyr-source

Zephyr Application based on KNoT protocol

libplctag

This C library provides a portable and simple API for accessing Allen-Bradley and Modbus PLC data over Ethernet.

mcuboot

Secure boot for 32-bit Microcontrollers!

riot

RIOT - The friendly OS for IoT

zephyr

Primary GIT Repository for the Zephyr Project

zephyr-knot-sdk

KNoT SDK based on Zephyr