Comments (7)
Set logtelegrams=true
and also you can enable debug in order to check what is actually received.
from wmbusmeters.
Good Morning,
the value logtelegrams=true ist active. But i doesent see any logs
from wmbusmeters.
Hi,
Set also loglevel=debug
- could be that you do not receive any more telegrams and one you see in MQTT is old one.
from wmbusmeters.
Hi,
here is the log. Do you can see any problems?
(serial) received binary ""
(amb8465/3665) reading response... 2
(serial) received binary ""
(amb8465/3665) reading response... 3
(serial) received binary ""
(amb8465/3665) are you there? no.
(serialtty) closed /dev/ttyUSB0 (detect amb8465/amb3665)
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyUSB0 speed(B9600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars(127,3,253) modem(DTR|RTS)
(serial) after config: /dev/ttyUSB0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars(127,176,9,100,227,127,248) modem(DTR|RTS)
(serialtty) opened /dev/ttyUSB0 fd 3 (detect im871a)
(serial) received binary ""
(serial /dev/ttyUSB0) sent "A5010F00"
(serial) EVENT thread interrupted
(serial) received binary "A581100833001301F13A000053D9"
(im871a) checkIM871AFrame "A581100833001301F13A000053D9"
(im871a) has_timestamp=0 has_rssi=0 has_crc16=1
(im871a) endpoint 1
(im871a) msgid 16
(im871a) got crc16 d953 expected d953
(im871a) received full frame
(device info bytes) "33001301F13A0000"
(im871a/im170a) info: type=im871a mode=collector firmware=13 hci=01 uid=00003af1
(serial /dev/ttyUSB0) sent "A5010500"
(serial) EVENT thread interrupted
(serial) received binary "A5810617FF000700B32512351000010001FF07023200010000000063C9"
(im871a) checkIM871AFrame "A5810617FF000700B32512351000010001FF07023200010000000063C9"
(im871a) has_timestamp=0 has_rssi=0 has_crc16=1
(im871a) endpoint 1
(im871a) msgid 6
(im871a) got crc16 c963 expected c963
(im871a) received full frame
(serialtty) closed /dev/ttyUSB0 (detect im871a)
(serial) EVENT thread interrupted
(device config bytes) "FF000700B32512351000010001FF070232000100000000"
(im871a/im170a) config: other link_mode=cab id=00103512 media=00 version=01 c_field=00 auto_rssi=01
(im871a/im170a) are you there? yes 00103512 im871a firmware: 13
(main) opening c1
Started auto im871a[00103512] on /dev/ttyUSB0 listening on c1
(im871a) on /dev/ttyUSB0
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyUSB0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars(127,4,253) modem(DTR|RTS)
(serial) after config: /dev/ttyUSB0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars(127,128,1,100,227,127,248) modem(DTR|RTS)
(serialtty) opened /dev/ttyUSB0 fd 4 (im871a)
(im871a) get config
(serial /dev/ttyUSB0) sent "A5010500"
(serial) EVENT thread interrupted
(serial) received binary "A5810617FF000700B32512351000010001FF07023200010000000063C9"
(im871a) checkIM871AFrame "A5810617FF000700B32512351000010001FF07023200010000000063C9"
(im871a) has_timestamp=0 has_rssi=0 has_crc16=1
(im871a) endpoint 1
(im871a) msgid 6
(im871a) got crc16 c963 expected c963
(im871a) received full frame
(im871a) get config completed
(im871a) got device id 00103512
(main) regular reset of im871a on /dev/ttyUSB0 will happen every 82800 seconds
(im871a) get device info
(serial /dev/ttyUSB0) sent "A5010F00"
(serial) EVENT thread interrupted
(serial) received binary "A581100833001301F13A000053D9"
(im871a) checkIM871AFrame "A581100833001301F13A000053D9"
(im871a) has_timestamp=0 has_rssi=0 has_crc16=1
(im871a) endpoint 1
(im871a) msgid 16
(im871a) got crc16 d953 expected d953
(im871a) received full frame
(im871a) device info completed
(im871a) device info: type=im871a mode=collector firmware=13 hci=01 uid=00003af1
(im871a) set config to set link mode 07
(serial /dev/ttyUSB0) sent "A5010306000207300100"
(serial) EVENT thread interrupted
(serial) received binary "A58104009CF7"
(im871a) checkIM871AFrame "A58104009CF7"
(im871a) has_timestamp=0 has_rssi=0 has_crc16=1
(im871a) endpoint 1
(im871a) msgid 4
(im871a) got crc16 f79c expected f79c
(im871a) received full frame
(im871a) set config completed
(wmbus) no alarm (expected activity) for im871a
(main) device /dev/ttyUSB1 not currently used, detect contents...
(serial) check if /dev/ttyUSB1 can be accessed
(serial) tty /dev/ttyUSB1 can be accessed
(serial) EVENT thread interrupted
(serialtty) device /dev/ttyUSB1 is already in use and locked.
(amb8465/3665) could not open tty /dev/ttyUSB1 for detection
(serial) EVENT thread interrupted
(serialtty) device /dev/ttyUSB1 is already in use and locked.
(im871a) could not open tty /dev/ttyUSB1 for detection
(serial) EVENT thread interrupted
(serialtty) device /dev/ttyUSB1 is already in use and locked.
(serial) EVENT thread interrupted
(serialtty) device /dev/ttyUSB1 is already in use and locked.
(serial) EVENT thread interrupted
(serialtty) device /dev/ttyUSB1 is already in use and locked.
(iu880b) could not open tty /dev/ttyUSB1 for detection
(main) ignoring /dev/ttyUSB1, it does not respond as any of the supported wmbus devices.
(serial) registered regular callback HOT_PLUG_DETECTOR(0) every 2 seconds
(serial) waiting for stop
from wmbusmeters.
That is ok - now you need to wait for telegrams from meter.
from wmbusmeters.
This issue is stale because it has been open for 2 month with no activity. Remove stale label or comment or this will be closed in 1 month.
from wmbusmeters.
This issue was closed because it has been stalled for 1 month with no activity.
from wmbusmeters.
Related Issues (20)
- (shell) /bin/sh exited with non-zero return code: 127 HOT 8
- Device cul:c1 is not working HOT 4
- Heat Meter multical602: meter detection did not match the selected driver kamheat! correct driver is: unknown!
- CYBLE GT3-ITR HOT 5
- Heat Meter multical602: meter detection did not match the selected driver kamheat! correct driver is: unknown!
- water meter in liters HOT 4
- Using multiple inputs in wmbusmeters (e.g. RTLSDR for wmbus devices and a serial dongle for mbus meters) HOT 2
- QUNDIS water meter: meter detection did not match the selected driver qwater! correct driver is: unknown! HOT 4
- Easymeter Q3AA 1064 V10.09 with ESYSWM20 HOT 1
- ESYSWM20 Telegram decoding help needed HOT 1
- TAURON Amiplus update HOT 5
- Reading kamstrup 303 heat meter
- Kamstrup 603 - there seems to be no data in the telegram HOT 1
- WIZE protocol support in 169Mhz ? HOT 2
- Decoding telegram fro qulcsonic w1 HOT 2
- Hydrocal M4 cooling HOT 1
- Driver for AXIOMA
- Multical: meter detection did not match the selected driver kamheat! correct driver is: unknown!
- QUNDIS Caloric 5.5 Heat Cost Allocator
- Problem adding xmq driver file to HA-Addon/Docke HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from wmbusmeters.