Bmeters GSD8-I with IWM-TX5 wmbus module about wmbusmeters HOT 5 CLOSED

Thanks, do you have the decryption key for the meter?

from wmbusmeters.

Thanks! The all-zeroes key works. I have pushed a new driver for this adapter. Please test!

./build/wmbusmeters --format=json 5144b4097073912218078c00247a0308400571e9615249ede52eaae09f61908f027c3877f3330ae9079528b23173ce124bcc255393e60b173c0a9f274c42dd92e4b23c14e8a41f042903358df01dd9268ad4 MyWater iwmtx5 22917370 00000000000000000000000000000000

{
"media":"water",
"meter":"iwmtx5",
"name":"MyWater",
"id":"22917370",
"meter_datetime":"2023-05-11 10:38:24",
"total_m3":0.025,
"status":"PERMANENT_ERROR",
"timestamp":"2023-05-12T09:14:30Z"
}

from wmbusmeters.

You can also view the new decode here:
https://wmbusmeters.org/analyze/5144b4097073912218078c00247a0308400571e9615249ede52eaae09f61908f027c3877f3330ae9079528b23173ce124bcc255393e60b173c0a9f274c42dd92e4b23c14e8a41f042903358df01dd9268ad4:auto:00000000000000000000000000000000

from wmbusmeters.

Hi, thanks for adding driver! Regarding to decoding on webpage it looks fine. But I have an error on home assistant addon:

(meter) WaterMeterGarden: meter detection did not match the selected driver ! correct driver is: unknown!
(meter) Not printing this warning again for id: 22917370 mfct: (BMT) BMETERS, Italy (0x9b4) type: Water meter (0x07) ver: 0x18
(meter) please consider opening an issue at https://github.com/wmbusmeters/wmbusmeters/
(meter) to add support for this unknown mfct,media,version combination
/run.sh: line 109:   258 Segmentation fault      (core dumped) /wmbusmeters/wmbusmeters --useconfig=$CONFIG_DATA_PATH
s6-rc: info: service legacy-services: stopping
2023/05/15 12:48:46 [notice] 83#83: signal 15 (SIGTERM) received from 81, exiting
2023/05/15 12:48:46 [notice] 268#268: exiting
2023/05/15 12:48:46 [notice] 268#268: exit
2023/05/15 12:48:46 [notice] 83#83: signal 17 (SIGCHLD) received from 268
2023/05/15 12:48:46 [notice] 83#83: worker process 268 exited with code 0
2023/05/15 12:48:46 [notice] 83#83: exit

BUT! I installed edge version of an addon and it works! So I'm waiting for update in non-edge addon version :)

from wmbusmeters.

@weetmuts tested 1.14.0 and everything works fine! :)

from wmbusmeters.