Comments (14)
This guy sounds like he has the same problem:
http://diydrones.com/forum/topics/arducam-minimosd-distorting-on-screen?commentI
d=705844%3AComment%3A1012796&xg_source=activity
Original comment by [email protected]
on 6 Nov 2012 at 9:00
from arducam-osd.
I have a related problem I think, if my camera is plugged in when booting I
loose OSD overlay, pressing the reset button doesent work... but if I unplug or
power cycle the camera then it works..
It looks like the OSD doesent sync.. this only appears to be a problem on my
600tvl camera... as it works okay with a 480tvl camera.. have latest firmware
installed and board is set for PAL in config tool
Have read somewhere that this is a known problem on high tvl cameras ?
Original comment by [email protected]
on 10 Dec 2012 at 6:41
from arducam-osd.
The Maxim chip does have a problem with hi tvl cameras, however at least with
my camera it works with the old firmware. There must be some subtle change to
the way the code initialises the hardware
Original comment by [email protected]
on 1 Jan 2013 at 1:59
from arducam-osd.
I'm having the same issue with a Sony 600TVL camera. The OSD functions
perfectly with the camera unplugged. As soon as I plug in the camera I get a
great image with no text overlay. I've tested this with every available version
of 2.x (arducam-osd and minimOSD Extra 2.1 and 2.1.5). I get the same results
with all versions.
Version 1.9 works perfectly.
To confirm this isn't a wiring issue, when I plug my GoPro in with 2.x it works
perfectly.
I posted this issue to the MinimOSD Extra team, as well. I'm not trying to get
people to duplicate effort, I just want to make sure I get the info to the
right people.
http://code.google.com/p/minimosd-extra/issues/detail?id=14&thanks=14&ts=1362455
393
I've also attached the specs for my camera.
Thank you!
Original comment by [email protected]
on 5 Mar 2013 at 3:57
Attachments:
- [Sony 600TVL Specs.png](https://storage.googleapis.com/google-code-attachments/arducam-osd/issue-34/comment-4/Sony 600TVL Specs.png)
from arducam-osd.
Hi,
I have asked Sandro to take a look also.
He have changed a few things.
Like it is auto detecting again, but if no video input than defaults to the
standard you set in CT.
Can you try?
Gábor
Original comment by [email protected]
on 12 Mar 2013 at 11:04
Attachments:
from arducam-osd.
Awesome. I will test it.
Thanks,
Preston
Original comment by [email protected]
on 13 Mar 2013 at 3:14
from arducam-osd.
Hi,
Please tell me the resoult. ;)
Thx
Original comment by [email protected]
on 13 Mar 2013 at 4:43
from arducam-osd.
Nothig yet? :)
Original comment by [email protected]
on 15 Mar 2013 at 11:38
from arducam-osd.
It works!!! Sorry for the delayed response. I've been out of town. I should
have let you know that. Thank you. Anything else I can test?
Original comment by [email protected]
on 17 Mar 2013 at 11:14
from arducam-osd.
Thank you!
I am glad it works now.
We will release a new stable release soon. ;)
Gábor
Original comment by [email protected]
on 18 Mar 2013 at 1:31
from arducam-osd.
Original comment by [email protected]
on 18 Mar 2013 at 1:32
- Changed state: Fixed
from arducam-osd.
Hi Gabor,
I also have an 600TVL camera but this firmware doesn't work.
http://www.foxtechfpv.com/wdr-760-600tvl-wide-dynamic-range-cam%EF%BC%88Pal%EF%B
C%89-p-492.html
Does i need to set somethings on the camera ?
Thank's a lot.
regards.
Original comment by [email protected]
on 27 Mar 2013 at 12:45
from arducam-osd.
I'm having the same issue with Sony Super HAD II camera. No firmware I've tried
works, so I'm stuck with power cycling the camera every time I fly :(
Original comment by [email protected]
on 29 Mar 2013 at 3:51
from arducam-osd.
It can be because you turn on your cam after the OSD.
There is two way to set standard now, thanks to Sandro.
By hand from CT. And automatically.
By hand from CT works in most cases. But some cameras.
Some cameras need special handling that the graphical chip does. But this way
you need to make the chip detect it automatically. As it does checks once on
boot, that is why you need to power your OSD after your camera or together with
(if your camera boots fast enough).
Gábor
Original comment by [email protected]
on 29 Mar 2013 at 10:13
from arducam-osd.
Related Issues (20)
- Warnings, Armed and Disarmed Notification Glitching on Panel 1
- Without Mavlink
- Load Custom Firmware Doesn't work
- problem compiling with arduino HOT 2
- OSD shows video but no data overlay + video feed shows noise on power up. HOT 1
- New APM modes not displaying on OSD HOT 2
- show decimals like 0.6m for the altitude. HOT 3
- "Update Charset" on power up with PX4
- kv osd with other controlers ? HOT 2
- GPS Time Stamp.
- Call
- Call Signs HOT 1
- MinimOSD - No overlay following EEPROM Flash HOT 1
- Either Video and no overlay OR unplug Fatshark cam and see grey screen with OSD HOT 2
- Support FrSky S.Port Telemetry HOT 3
- OSD displays data but no video
- Step by step guide
- Flight mode not shown for hexa- and octocopters HOT 1
- Hybrid renamed to PosHold
- Reduce the number of decimals on Lat/Lon on Display
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from arducam-osd.