deefuzzer install failer: ERROR: Command errored out with exit status 1: about deefuzzer HOT 10 CLOSED

@robnoordt
As for #91, a dependency is missing here (liblo-dev), try:

sudo apt-get install python-pip python-dev python-liblo \
                     python-mutagen python-pycurl python-yaml \
                     libshout3-dev librtmp-dev liblo-dev \
                     libcurl4-openssl-dev libmysqlclient-dev

and then sudo pip install deefuzzer

from deefuzzer.

Here are the results;

root@raspberry3:~# sudo apt-get install python-pip python-dev python-liblo python-mutagen python-pycurl python-yaml libshout3-dev librtmp-dev liblo-dev libcurl4-openssl-dev libmysqlclient-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libmysqlclient-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'libmysqlclient-dev' has no installation candidate
root@raspberry3:#
root@raspberry3:#
It seeams misql has been chanched to maria db in Stretsh. So give it a tri;

root@raspberry3:# apt install libmariadbclient-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libmariadbclient-dev is already the newest version (10.1.38-0+deb9u1).
libmariadbclient-dev set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@raspberry3:#

End again tried install deefuzzer
No changes;

error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-hqnyt_to/pyliblo/setup.py'"'"'; file='"'"'/tmp/pip-install-hqnyt_to/pyliblo/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-b4bybruc/install-record.txt --single-version-externally-managed --compile Check the logs for full command output.
root@raspberry3:~#

From the website PyPI:
https://pypi.org/project/mysqlclient/

root@raspberry3:# apt-get install python-dev default-libmysqlclient-dev # Debian / Ubuntu
Reading package lists... Done
Building dependency tree
Reading state information... Done
default-libmysqlclient-dev is already the newest version (1.0.2).
python-dev is already the newest version (2.7.13-2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@raspberry3:#

Here you can sea all installed packages;

root@raspberry3:~# pip list
Package Version

certifi 2019.11.28
chardet 3.0.4
Cython 0.29.14
distribute 0.7.3
future 0.18.2
gcc 0.1
idna 2.8
mutagen 1.43.0
mysqlclient 1.4.6
oauthlib 3.1.0
pip 19.3.1
pycurl 7.43.0.3
python-shout 0.2.6
python-twitter 3.5
PyYAML 5.2
requests 2.22.0
requests-oauthlib 1.3.0
setuptools 42.0.2
urllib3 1.25.7
wheel 0.33.6
root@raspberry3:~#

One other tri to install deefuzzer results in below;

root@raspberry3:~# pip install deefuzzer
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting deefuzzer
Using cached https://www.piwheels.org/simple/deefuzzer/DeeFuzzer-0.7.2-py3-none-any.whl
Requirement already satisfied: pyyaml in /usr/local/lib/python3.6/site-packages (from deefuzzer) (5.2)
Requirement already satisfied: setuptools in /usr/local/lib/python3.6/site-packages (from deefuzzer) (42.0.2)
Requirement already satisfied: pycurl in /usr/local/lib/python3.6/site-packages (from deefuzzer) (7.43.0.3)
Requirement already satisfied: python-twitter in /usr/local/lib/python3.6/site-packages (from deefuzzer) (3.5)
Requirement already satisfied: mutagen in /usr/local/lib/python3.6/site-packages (from deefuzzer) (1.43.0)
Collecting pyliblo
Using cached https://files.pythonhosted.org/packages/c0/da/4b8052ab5aa07952d7fe7b068d737a042e76373573eadd340f7550eddea9/pyliblo-0.10.0.tar.gz
Requirement already satisfied: python-shout in /usr/local/lib/python3.6/site-packages (from deefuzzer) (0.2.6)
Requirement already satisfied: mysqlclient in /usr/local/lib/python3.6/site-packages (from deefuzzer) (1.4.6)
Requirement already satisfied: requests-oauthlib in /usr/local/lib/python3.6/site-packages (from python-twitter->deefuzzer) (1.3.0)
Requirement already satisfied: requests in /usr/local/lib/python3.6/site-packages (from python-twitter->deefuzzer) (2.22.0)
Requirement already satisfied: future in /usr/local/lib/python3.6/site-packages (from python-twitter->deefuzzer) (0.18.2)
Requirement already satisfied: oauthlib>=3.0.0 in /usr/local/lib/python3.6/site-packages (from requests-oauthlib->python-twitter->deefuzzer) (3.1.0)
Requirement already satisfied: urllib3!=1.25.0,!=1.25.1,<1.26,>=1.21.1 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (1.25.7)
Requirement already satisfied: idna<2.9,>=2.5 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (2.8)
Requirement already satisfied: certifi>=2017.4.17 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (2019.11.28)
Requirement already satisfied: chardet<3.1.0,>=3.0.2 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (3.0.4)
Building wheels for collected packages: pyliblo
Building wheel for pyliblo (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-z61m5abp/pyliblo/setup.py'"'"'; file='"'"'/tmp/pip-install-z61m5abp/pyliblo/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-lmzg9qyj --python-tag cp36
cwd: /tmp/pip-install-z61m5abp/pyliblo/
Complete output (16 lines):
running bdist_wheel
running build
running build_ext
cythoning src/liblo.pyx to src/liblo.c
/usr/local/lib/python3.6/site-packages/Cython/Compiler/Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: /tmp/pip-install-z61m5abp/pyliblo/src/liblo.pxd
tree = Parsing.p_module(s, pxd, full_module_name)
building 'liblo' extension
creating build
creating build/temp.linux-armv7l-3.6
creating build/temp.linux-armv7l-3.6/src
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -I/usr/local/include/python3.6m -c src/liblo.c -o build/temp.linux-armv7l-3.6/src/liblo.o -fno-strict-aliasing -Werror-implicit-function-declaration -Wfatal-errors
src/liblo.c:599:19: fatal error: lo/lo.h: No such file or directory
#include "lo/lo.h"
^
compilation terminated.
error: command 'gcc' failed with exit status 1

ERROR: Failed building wheel for pyliblo
Running setup.py clean for pyliblo
Failed to build pyliblo
Installing collected packages: pyliblo, deefuzzer
Running setup.py install for pyliblo ... error
ERROR: Command errored out with exit status 1:
command: /usr/local/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-z61m5abp/pyliblo/setup.py'"'"'; file='"'"'/tmp/pip-install-z61m5abp/pyliblo/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-1tkdl_vr/install-record.txt --single-version-externally-managed --compile
cwd: /tmp/pip-install-z61m5abp/pyliblo/
Complete output (14 lines):
running install
running build
running build_ext
skipping 'src/liblo.c' Cython extension (up-to-date)
building 'liblo' extension
creating build
creating build/temp.linux-armv7l-3.6
creating build/temp.linux-armv7l-3.6/src
gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -I/usr/local/include/python3.6m -c src/liblo.c -o build/temp.linux-armv7l-3.6/src/liblo.o -fno-strict-aliasing -Werror-implicit-function-declaration -Wfatal-errors
src/liblo.c:599:19: fatal error: lo/lo.h: No such file or directory
#include "lo/lo.h"
^
compilation terminated.
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/bin/python3.6 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-z61m5abp/pyliblo/setup.py'"'"'; file='"'"'/tmp/pip-install-z61m5abp/pyliblo/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-1tkdl_vr/install-record.txt --single-version-externally-managed --compile Check the logs for full command output.
root@raspberry3:~# +

any other suggestions?

from deefuzzer.

@robnoordt oh! libmysqlclient-dev seems not available anymore, we should then install libmariadbclient-dev instead.

Your last command did not install other necessary packages, so please install all of them in one command:

sudo apt-get install python-pip python-dev python-liblo \
                         python-mutagen python-pycurl python-yaml \
                         libshout3-dev librtmp-dev liblo-dev \
                         libcurl4-openssl-dev libmariadbclient-dev

Fixed in 743ca82

from deefuzzer.

Thanks again for your responce. Almost there.
Here comes mi results;
apt install python-pip python-dev python-liblo -y
apt install python-mutagen python-pycurl python-yaml -y -y
apt install libshout3-dev librtmp-dev liblo-dev -y
apt install libcurl4-openssl-dev libmariadbclient-dev -y

Nouw installed all succesfullyu!
After tthis the deefuzzerr install;
==>>

root@raspberry3:# pip install deefuzzer
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting deefuzzer
Downloading https://www.piwheels.org/simple/deefuzzer/DeeFuzzer-0.7.3-py3-none-any.whl (58kB)
|████████████████████████████████| 61kB 549kB/s
Requirement already satisfied: python-twitter in /usr/local/lib/python3.6/site-packages (from deefuzzer) (3.5)
Requirement already satisfied: mutagen in /usr/local/lib/python3.6/site-packages (from deefuzzer) (1.43.0)
Requirement already satisfied: setuptools in /usr/local/lib/python3.6/site-packages (from deefuzzer) (42.0.2)
Requirement already satisfied: python-shout==0.2.6 in /usr/local/lib/python3.6/site-packages (from deefuzzer) (0.2.6)
Requirement already satisfied: pycurl in /usr/local/lib/python3.6/site-packages (from deefuzzer) (7.43.0.3)
Requirement already satisfied: mysqlclient in /usr/local/lib/python3.6/site-packages (from deefuzzer) (1.4.6)
Requirement already satisfied: pyyaml in /usr/local/lib/python3.6/site-packages (from deefuzzer) (5.2)
Collecting pyliblo
Using cached https://files.pythonhosted.org/packages/c0/da/4b8052ab5aa07952d7fe7b068d737a042e76373573eadd340f7550eddea9/pyliblo-0.10.0.tar.gz
Requirement already satisfied: requests in /usr/local/lib/python3.6/site-packages (from python-twitter->deefuzzer) (2.22.0)
Requirement already satisfied: requests-oauthlib in /usr/local/lib/python3.6/site-packages (from python-twitter->deefuzzer) (1.3.0)
Requirement already satisfied: future in /usr/local/lib/python3.6/site-packages (from python-twitter->deefuzzer) (0.18.2)
Requirement already satisfied: idna<2.9,>=2.5 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (2.8)
Requirement already satisfied: urllib3!=1.25.0,!=1.25.1,<1.26,>=1.21.1 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (1.25.7)
Requirement already satisfied: certifi>=2017.4.17 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (2019.11.28)
Requirement already satisfied: chardet<3.1.0,>=3.0.2 in /usr/local/lib/python3.6/site-packages (from requests->python-twitter->deefuzzer) (3.0.4)
Requirement already satisfied: oauthlib>=3.0.0 in /usr/local/lib/python3.6/site-packages (from requests-oauthlib->python-twitter->deefuzzer) (3.1.0)
Building wheels for collected packages: pyliblo
Building wheel for pyliblo (setup.py) ... done
Created wheel for pyliblo: filename=pyliblo-0.10.0-cp36-cp36m-linux_armv7l.whl size=305829 sha256=9f59120b6d32f001c5444585ed0fcf60bd893986be6832712c591346c87f76c2
Stored in directory: /root/.cache/pip/wheels/63/18/20/4124f951263fa3daf438b19eafc48ab6a803508d585d69a902
Successfully built pyliblo
Installing collected packages: pyliblo, deefuzzer
Successfully installed deefuzzer-0.7.3 pyliblo-0.10.0
root@raspberry3:#

Ahha, that looks a lot better, isnt it?
Ok, here komes the final.

root@raspberry3:# deefuzzer /etc/deefuzzer/deefuzzer.xml
Traceback (most recent call last):
File "/usr/local/bin/deefuzzer", line 8, in
import deefuzzer
File "/usr/local/lib/python3.6/site-packages/deefuzzer/init.py", line 1, in
from core import *
ModuleNotFoundError: No module named 'core'
root@raspberry3:#
Ad the end of almost all;
Hopefully this is the last truble to getting it work.

installed the moduule utils-core · PyPI
https://pypi.org/project/utils-core/

No result on this. I do not know if this could be a solution but just tried it.

Searched on google for: ModuleNotFoundError: No module named 'core'
Fond: https://stackoverflow.com/questions/35330964/no-module-named-core-when-using-pyping-for-python-3
but I do not realy understand what it means.
Do you have a stap bi stap solution for this?

from deefuzzer.

Hi @robnoordt
The current version is compatible with python 2.7 only but I have just prepared a python 3 version.
Please stay tuned, I will push it today if everything is fine ;)

from deefuzzer.

Oh, that will be great! Looking forward.

from deefuzzer.

@robnoordt 0.8.0 is now available, compatible with Python 3.
See https://github.com/yomguy/DeeFuzzer#installation for new dependencies.
Enjoy! ;-)

from deefuzzer.

[Errno 2] No such file or directory: '/etc/deefuzzer/deefuzzer.yaml'
root@raspberry3:~# deefuzzer
deefuzzer : easy and instant media streaming tool
version : 0.8.0
running on system : Linux

Copyright (c) 2007-2019 Guillaume Pellerin [email protected]
All rights reserved.

This software is licensed as described in the file COPYING, which
you should have received as part of this distribution. The terms
are also available at https://github.com/yomguy/DeeFuzzer/blob/master/LICENSE

depends: python, python-dev, python-xml, python-shout | shout-python, libshout3,
libshout3-dev, python-mutagen, python-pycurl

recommends: icecast2, python-twitter, python-liblo | pyliblo (>= 0.26)

Usage : deefuzzer [file]

where [file] is the path for a XML config file.

Edit an example in example/deefuzzer.xml
and then start one or more stations:

$ deefuzzer example/deefuzzer.xml

see http://github.com/yomguy/DeeFuzzer for more details and debugging.

[1]+ Exit 1 deefuzzer /etc/deefuzzer/deefuzzer.yaml
root@raspberry3:~#

from deefuzzer.

After installing/updating the install packages, that worked out Ok,
Just in the commandline deefuzzer;
[Errno 2] No such file or directory: '/etc/deefuzzer/deefuzzer.yaml'
root@raspberry3:~# deefuzzer
deefuzzer : easy and instant media streaming tool
version : 0.8.0
running on system : Linux

Copyright (c) 2007-2019 Guillaume Pellerin [email protected]
All rights reserved.

This software is licensed as described in the file COPYING, which
you should have received as part of this distribution. The terms
are also available at https://github.com/yomguy/DeeFuzzer/blob/master/LICENSE

depends: python, python-dev, python-xml, python-shout | shout-python, libshout3,
libshout3-dev, python-mutagen, python-pycurl

recommends: icecast2, python-twitter, python-liblo | pyliblo (>= 0.26)

Usage : deefuzzer [file]

where [file] is the path for a XML config file.

Edit an example in example/deefuzzer.xml
and then start one or more stations:

$ deefuzzer example/deefuzzer.xml

see http://github.com/yomguy/DeeFuzzer for more details and debugging.

[1]+ Exit 1 deefuzzer /etc/deefuzzer/deefuzzer.yaml
root@raspberry3:~#

Looks Ok but?

deefuzzer /etc/deefuzzer/deefuzzer.yaml &

root@raspberry3:# deefuzzer /etc/deefuzzer/deefuzzer.yaml
Traceback (most recent call last):
File "/usr/local/bin/deefuzzer", line 56, in
main()
File "/usr/local/bin/deefuzzer", line 48, in main
d = deefuzzer.core.DeeFuzzer(sys.argv[-1])
File "/usr/local/lib/python3.6/site-packages/deefuzzer/core.py", line 56, in init
self.conf = get_conf_dict(self.conf_file)
File "/usr/local/lib/python3.6/site-packages/deefuzzer/tools/utils.py", line 98, in get_conf_dict
confile = open(file, 'r')
FileNotFoundError: [Errno 2] No such file or directory: '/etc/deefuzzer/deefuzzer.yaml'
root@raspberry3:#

from deefuzzer.

@robnoordt well the error message is explicit : No such file or directory: '/etc/deefuzzer/deefuzzer.yaml'
So you miss a valid path for your config file.

from deefuzzer.