SB_RGBA_DRV support about nextpnr HOT 7 CLOSED

The problem is that the primitive isn't supported at all, lack of timing is just the first error that occurs. I'll see if I have time to get this done in the next few weeks.

from nextpnr.

I believe this is related: I get the same error but with the WKUP pin of the SPI hard modules and also for the I2C hard modules
ERROR: no timing info for port 'SDAOE' of cell type 'SB_I2C'

from nextpnr.

Thanks for the report chaps! This is an intentional hard failure to catch uses of timing arcs that haven't been populated yet -- perhaps @daveshah1 can help fill those in?

from nextpnr.

Okay, so the issue appears to be more than just timing arcs. Standby!

from nextpnr.

"No wire found for port RGB0" ;)

from nextpnr.

@eddiehung Standing by ... for a while now :P

Is there an easy way to just ignore the lack of timing ?

from nextpnr.

Fixed

from nextpnr.