Comments (10)
tonyhutter
commented on September 10, 2024
Here's what I see on my AlmaLinux 8 VM:
$ cat /etc/redhat-release
AlmaLinux release 8.8 (Sapphire Caracal)
$ sudo dnf install zfs-release-2-3.el8.noarch.rpm
Last metadata expiration check: 0:04:07 ago on Wed 24 May 2023 12:29:50 PM EDT.
Dependencies resolved.
=======================================================================================================
Package Architecture Version Repository Size
=======================================================================================================
Installing:
zfs-release noarch 2-3.el8 @commandline 13 k
Transaction Summary
=======================================================================================================
Install 1 Package
Total size: 13 k
Installed size: 6.5 k
Is this ok [y/N]: y
Downloading Packages:
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : 1/1
Installing : zfs-release-2-3.el8.noarch 1/1
Running scriptlet: zfs-release-2-3.el8.noarch 1/1
Verifying : zfs-release-2-3.el8.noarch 1/1
Installed:
zfs-release-2-3.el8.noarch
Complete!
$ sudo dnf list --showduplicates zfs
Last metadata expiration check: 0:04:15 ago on Wed 24 May 2023 12:29:50 PM EDT.
Available Packages
zfs.x86_64 2.1.6-1.el8 zfs
zfs.x86_64 2.1.7-1.el8 zfs
zfs.x86_64 2.1.8-1.el8 zfs
zfs.x86_64 2.1.9-1.el8 zfs
zfs.x86_64 2.1.10-1.el8 zfs
zfs.x86_64 2.1.11-1.el8 zfs
from zfsonlinux.github.com.
stephanwehr
commented on September 10, 2024
What is the checksum of your rpm package?
wget https://zfsonlinux.org/epel/zfs-release-2-3$(rpm --eval "%{dist}").noarch.rpm
md5sum zfs-release-2-3.el8.noarch.rpm
191547340e36aec2c0072c29f12cf1e4 zfs-release-2-3.el8.noarch.rpm
Same result using an AlmaLinux 8.7 Docker image
docker run --rm -ti --hostname alin almalinux:8.7 bash -l -i
[root@alin /]# dnf install https://zfsonlinux.org/epel/zfs-release-2-3$(rpm --eval "%{dist}").noarch.rpm
AlmaLinux 8 - BaseOS 2.7 MB/s | 2.9 MB 00:01
AlmaLinux 8 - AppStream 4.6 MB/s | 11 MB 00:02
AlmaLinux 8 - Extras 25 kB/s | 18 kB 00:00
zfs-release-2-3.el8.noarch.rpm 159 kB/s | 13 kB 00:00
Dependencies resolved.
========================================================================================================================
Package Architecture Version Repository Size
========================================================================================================================
Installing:
zfs-release noarch 2-3.el8 @commandline 13 k
Transaction Summary
========================================================================================================================
Install 1 Package
Total size: 13 k
Installed size: 6.5 k
Is this ok [y/N]: y
Downloading Packages:
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : 1/1
Installing : zfs-release-2-3.el8.noarch 1/1
Running scriptlet: zfs-release-2-3.el8.noarch 1/1
Verifying : zfs-release-2-3.el8.noarch 1/1
Installed:
zfs-release-2-3.el8.noarch
Complete!
[root@alin /]# dnf list --showduplicates zfs
ZFS on Linux for EL8 - dkms 40 kB/s | 57 kB 00:01
Available Packages
zfs.x86_64 2.1.11-2.el8 zfs
from zfsonlinux.github.com.
tonyhutter
commented on September 10, 2024
What is the checksum of your rpm package?
Same as yours:
$ md5sum zfs-release-2-3.el8.noarch.rpm
191547340e36aec2c0072c29f12cf1e4 zfs-release-2-3.el8.noarch.rpm
Same result using an AlmaLinux 8.7 Docker image
That's probably the issue - AlmaLinux is at version 8.8 now. It looks like my yum metadata wasn't refreshed in my earlier example. Here's what I'm seeing now:
$ sudo dnf list --showduplicates zfs
Last metadata expiration check: 1:42:30 ago on Wed 24 May 2023 12:52:59 PM EDT.
Available Packages
zfs.x86_64 2.1.11-2.el8 zfs
$ sudo dnf --releasever=8.8 list --showduplicates zfs
Last metadata expiration check: 0:02:51 ago on Wed 24 May 2023 02:32:46 PM EDT.
Available Packages
zfs.x86_64 2.1.11-2.el8 zfs
$ sudo dnf --releasever=8.7 list --showduplicates zfs
Last metadata expiration check: 0:03:11 ago on Wed 24 May 2023 02:32:32 PM EDT.
Available Packages
zfs.x86_64 2.1.6-1.el8 zfs
zfs.x86_64 2.1.7-1.el8 zfs
zfs.x86_64 2.1.8-1.el8 zfs
zfs.x86_64 2.1.9-1.el8 zfs
zfs.x86_64 2.1.10-1.el8 zfs
zfs.x86_64 2.1.11-1.el8 zfs
⬆️ these are the correct RPMs you should be seeing for Alma 8.7 and 8.8.
from zfsonlinux.github.com.
stephanwehr
commented on September 10, 2024
Was the structure of the ZFS EL8 repository changed recently?
How can we get this working again without specifying the "--releasever" parameter?
I can't remember that I have to use this parameter in the past.
Specifying the parameter should be only a temporary workaround but not a permanent solution. 😃
from zfsonlinux.github.com.
tonyhutter
commented on September 10, 2024
The repo behavior was changed in 6a7dda9.
Your best bet is to udate your docker image to Alma 8.8. If that's not possible, you can edit /etc/yum.repos.d/zfs.repo and change all the $releasever to a hardocded 8.7 to match your docker image
- baseurl=http://download.zfsonlinux.org/epel/$releasever/$basearch/
+ baseurl=http://download.zfsonlinux.org/epel/8.7/$basearch/Note that if you do that, you're not going to get any of the newer releases, since Alma 8.7 only supports up to zfs-2.1.11.
from zfsonlinux.github.com.
stephanwehr
commented on September 10, 2024
In general and after reading openzfs/zfs#10328 I agree, using $releasever inside the repository file is the right way forward.
As you mentioned, Requires: <specific_kernel_version> (what would be the right approach) is not used, therefore in some cases (like mine) the version needs to be hardcoded.
It seems there is no easy way out, thank you for your feedback
from zfsonlinux.github.com.
stephanwehr
commented on September 10, 2024
Sorry, I have to reopen this issue, maybe you are already aware of this but I am facing an issue using the "releasever" parameter. During the ZFS installation I've got the following error (more details below):
Curl error (37): Couldn't read a file:// file for file:///etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-8.7 [Couldn't open file /etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-8.7]
Steps to reproduce:
dnf install https://zfsonlinux.org/epel/zfs-release-2-3$(rpm --eval "%{dist}").noarch.rpm
AlmaLinux 8 - BaseOS 2.6 MB/s | 3.8 MB 00:01
AlmaLinux 8 - AppStream 4.5 MB/s | 11 MB 00:02
AlmaLinux 8 - Extras 32 kB/s | 18 kB 00:00
zfs-release-2-3.el8.noarch.rpm 216 kB/s | 13 kB 00:00
Dependencies resolved.
=========================================================================================================
Package Architecture Version Repository Size
=========================================================================================================
Installing:
zfs-release noarch 2-3.el8 @commandline 13 k
Transaction Summary
=========================================================================================================
Install 1 Package
Total size: 13 k
Installed size: 6.5 k
Is this ok [y/N]: y
Downloading Packages:
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : 1/1
Installing : zfs-release-2-3.el8.noarch 1/1
Running scriptlet: zfs-release-2-3.el8.noarch 1/1
Verifying : zfs-release-2-3.el8.noarch 1/1
Installed:
zfs-release-2-3.el8.noarch
Complete!
dnf --releasever=8.7 list --showduplicates zfs
AlmaLinux 8.7 - BaseOS 3.7 MB/s | 6.3 MB 00:01
AlmaLinux 8.7 - AppStream 3.5 MB/s | 12 MB 00:03
AlmaLinux 8.7 - Extras 23 kB/s | 19 kB 00:00
ZFS on Linux for EL8.7 - dkms 157 kB/s | 301 kB 00:01
Available Packages
zfs.x86_64 2.1.6-1.el8 zfs
zfs.x86_64 2.1.7-1.el8 zfs
zfs.x86_64 2.1.8-1.el8 zfs
zfs.x86_64 2.1.9-1.el8 zfs
zfs.x86_64 2.1.10-1.el8 zfs
zfs.x86_64 2.1.11-1.el8 zfs
dnf -y --releasever=8.7 install zfs-2.1.9
...
(197/198): libzpool5-2.1.9-1.el8.x86_64.rpm 699 kB/s | 1.3 MB 00:01
(198/198): zfs-dkms-2.1.9-1.el8.noarch.rpm 1.9 MB/s | 30 MB 00:15
---------------------------------------------------------------------------------------------------------
Total 3.5 MB/s | 131 MB 00:37
Extra Packages for Enterprise Linux 8 - x86_64 1.6 MB/s | 1.6 kB 00:00
Importing GPG key 0x2F86D6A1:
Userid : "Fedora EPEL (8) <[email protected]>"
Fingerprint: 94E2 79EB 8D8F 25B2 1810 ADF1 21EA 45AB 2F86 D6A1
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
Key imported successfully
ZFS on Linux for EL8.7 - dkms 0.0 B/s | 0 B 00:00
Curl error (37): Couldn't read a file:// file for file:///etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-8.7 [Couldn't open file /etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-8.7]
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'dnf clean packages'.
from zfsonlinux.github.com.
tonyhutter
commented on September 10, 2024
@stephanwehr try this workaround:
sudo ln -s /etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-8 etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-8.7
from zfsonlinux.github.com.
stephanwehr
commented on September 10, 2024
Yes possible workarounds as you mentioned would be either a symbolik link
ln -s RPM-GPG-KEY-openzfs-2013 /etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-8.7
or adjusting the ZFS repository file /etc/yum.repos.d/zfs.repo
[zfs]
name=ZFS on Linux for EL$releasever - dkms
baseurl=http://download.zfsonlinux.org/epel/8.7/$basearch/
enabled=1
metadata_expire=7d
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-openzfs-el-$releasever
I just wanted to let you know about the current behavior. From my point of view we should find a solution that doesn't require workarounds.
from zfsonlinux.github.com.
stephanwehr
commented on September 10, 2024
As there is a potential for data corruption (#15526) below version 2.1.14 or 2.2.2, it is not recommended to use older packages.
from zfsonlinux.github.com.
Related Issues (20)
- Please point archive.zfsonlinux.org to Dualstack S3 endpoint HOT 1
- Roll back 0.7.7 links from zfsonlinux.org? HOT 2
- Missing message ID HOT 3
- msg pages should be linuxisized and use the same page layout HOT 1
- https not http for the repo home page link to zfsonlinux.org HOT 5
- Shrinking boot pool HOT 1
- ZFS Breaks Install Scripts with Permission Error (Root on EXT4) HOT 1
- Instability on AL2 HOT 7
- zfsonlinux.org - not available via ipv6 HOT 6
- fedora37 release? HOT 17
- Is download.zfsonlinux.org offline? HOT 1
- Release request for EPEL 8.7 HOT 5
- Fedora 38 HOT 2
- Linux load average increased since 2.2.0 HOT 1
- Fedora 39 HOT 6
- ZFS 2.2 fails to install in Fedora 39 Silverblue with 6.7 kernel HOT 2
- Release ZFS 2.2 for EL9 HOT 1
- ZFS v2.2.x?
- Fedora 40 HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from zfsonlinux.github.com.