3dp-tech / ender-3-max Goto Github PK

Dear sir,
1. The firmware has layer missing issue with- pause, filament change, filament runout, power outage.
after the hot end returns to print from parking it's missing a layer.

For testing this I have used a 1cm cylinder stl, I have made post processing code to pause/ filament change at 5mm, after returning from parking it's having offset of next layer.

           2. In creality 2.0.6 version the power loss has auto resume function but, in this version, when the power is back it's asking 'click to resume'.
           
           If you can solve or tell what changes need to be done, I'll do them.

I tried to solve the issue but didn't succeed. I tried the new 2.1.2 version but facing same issues.
here I have attached the image, stl file and video link.

image:

stl file:
https://drive.google.com/file/d/1DI28znzfsdn5mIiFvoEDaLGu6kcIlPc8/view?usp=share_link

video link:
https://drive.google.com/file/d/1Hwk1OP7btvbP5aBaeO0OlfgNDg04MMIx/view?usp=share_link

Thank you.

In the bin folder, you have 300x300 and 300x300-0 more recently added. I have the exact same mainboard with A/C marked for the drivers, and with CRTouch mounted on the OEM holes (barely not touching the blower fan!) I've changed the fans to Noctuas and have an Ender 3 Pro dual-z kit and a separately purchased 500mm rod ready to go on next. Could you provide any insight on what the differences are? Any recommendations?

Dear sir,
Thank you so much for sharing the ender 3 max cr-touch firmware, the firmware is way more advanced, and I really loved it.
There is an issue with 16points bed leveling, I had already read your point stating that using 310mm X 310 mm gives better leveling
but for the last four points on using 310mm on Y-axis the bed's bottom is hitting the timing belt of y axis this may reduce the life of belt and the nozzle is away from the bed on the 13th point.
Thanking you sir,

.