This is nano minimal version of LibAPRS for tracker devices

This library is based on https://github.com/markqvist/LibAPRS Originally I tried to use LibAPRS, when used in conjuction with Adafruid_GPS or TinyGPS it takes the whole global memory leaving no space for APRS Tracker functions (e.g.: serial configuration )

So I decided to sanitize the LibAPRS for those who will use it for mini tracker devices to send APRS packeges.

LibAPRS_Tracker is a library for the Arduino IDE, that makes it easy to design and implemet your own APRS Tracker devices for sending out your location, telemetry, etc. The hardware is Micromodem compiant using resistor ladder on pins D4,5,6,7. The PTT pin is D3. All the AFSK modulation, AX.25 packing, and such is running transparently in the “background” in interrupts.

• Generate APRS AX.25 packets
• Generate tones using resistor ladder
• Send Location
• Send telemetry
• Easy configuration
• Setting destination, path, symbol, height, power, etc.

• send messages over APRS
• receive messages over APRS
• receive and decode APRS messages

D2/D13 PTT Pin

D4, D5, D6, D7 Audio generation PINs

Destination : HYMTR

PATH1 : WIDE1-1

PATH2 : WIDE2-1

Preamble : 350

TX Tail : 100

Symbol Table : /

Symbol : > (car)

Power : 10 (not used if > 10)

Height : 10 (not used if > 10)

Gain : 10 (not used if > 10)

Directivity : 10 (not used if > 10)