- puppetlabs-pe_status_check
- Supporting Content
puppetlabs-pe_status_check provides a way to alert the end-user when Puppet Enterprise is not in an ideal state. It uses pre-set indicators and has a simplified output that directs the end-user to the next steps for resolution.
Users of the tool have a greater ability to provide their own self-service resolutions and shorter incident resolution times with Puppet Support due to higher quality information available to our team.
This module installs two structured facts named pe_status_check
and agent_status_check
. Each fact contains an array of key pairs that output an indicator ID and a Boolean value. The pe_status_check
fact is confined to only Puppet Enterprise infrastructure agents, and the agent_status_check
fact is confined to non-infrastructure agent nodes.
Install the module, plug-in sync will be used to deliver the required facts for this module, to each agent node in the environment the module is installed in.
This module primarily provides indicators using facts, so installing the module and allowing plug-in sync to occur lets the module start functioning.
Collection of the agent_status_check
fact is disabled by default so as not to affect all puppet agents indiscriminately
The facts in this module can be directly consumed by monitoring tools such as Splunk, any element in the structured facts pe_status_check
or agent_status_check
reporting as false
indicates a fault state in Puppet Enterprise. When any element reports as false
, look up the incident ID in the reference section for next steps.
Alternatively, assigning the class pe_status_check
to the infrastructure notifies on each Puppet run if any indicator is reporting as false
, this can be viewed in the Puppet report for each node.
By default your normal agent population will not collect the agent_status_check
fact, this can be enabled for all agents or a subset of agents, by classifying pe_status_check::agent_status_enable to your nodes.
Following the addition of the class pe_status_check::agent_status_enable
to an agent node, disable the collection of agent_status_check fact, set the following parameter:
pe_status_check::agent_status_enable::agent_status_enabled = false
To activate the notification functions of this module, classify your Puppet Infrastructure with the pe_status_check
class using your preferred classification method. Below is an example using site.pp
.
node 'node.example.com' {
include pe_status_check
}
For maximum coverage, report on all default indicators. However, if you need to make exceptions for your environment, classify the array parameter indicator_exclusions
with a list of all the indicators you do not want to report on.
This workflow is not available for the agent_status_check
fact.
class { 'pe_status_check':
indicator_exclusions => ['S0001','S0003','S0003','S0004'],
}
The plans, pe_status_check::infra_summary
and pe_status_check::agent_summary
summarize the status of each of the checks on target nodes that have the pe_status_check
or agent_status_check
fact respectively, sample output can be seen below:
{
"nodes": {
"details": {
"pe-psql-70aefa-0.region-a.domain.com": {
"failed_tests_count": 0,
"passing_tests_count": 13,
"failed_tests_details": []
},
"pe-server-70aefa-0.region-a.domain.com": {
"failed_tests_count": 1,
"passing_tests_count": 30,
"failed_tests_details": [
"S0022 Determines if there is a valid Puppet Enterprise license in place at /etc/puppetlabs/license.key on your primary which is not going to expire in the next 90 days"
]
},
"pe-compiler-70aefa-0.region-a.domain.com": {
"failed_tests_count": 0,
"passing_tests_count": 23,
"failed_tests_details": []
},
"pe-compiler-70aefa-1.region-b.domain.com": {
"failed_tests_count": 0,
"passing_tests_count": 23,
"failed_tests_details": []
}
},
"failing": [
"pe-server-70aefa-0.region-a.domain.com"
],
"passing": [
"pe-compiler-70aefa-1.region-b.domain.com",
"pe-compiler-70aefa-0.region-a.domain.com",
"pe-psql-70aefa-0.region-a.domain.com"
]
},
"errors": {},
"status": "failing",
"failing_node_count": 1,
"passing_node_count": 3
}
The plan pe_status_check::infra_role_summary
will provide you a hash with all PE infrastructure nodes, grouped by their role:
{
"primary": [
"primary.bastelfreak.local"
],
"replica": [
"replica.bastelfreak.local"
],
"compiler": [
"compiler01.bastelfreak.local",
"compiler02.bastelfreak.local"
],
"postgres": [],
"legacy_primary": [],
"legacy_compiler": []
}
The data is obtained from PuppetDB by checking the classes in the last catalog of every node. You can reuse the data in other plans or use it to inspect your environment. You can plott it in a more human-readable way with the puppet/format modules.
As the pe_status_check module uses Puppet's existing fact behavior to gather the status data from each of the agents, it is possible to use PQL (puppet query language) to gather this information.
Consult with your local Puppet administrator to construct a query suited to your organizational needs. Please find some examples of using pe_client_tools to query the status check facts below:
-
To find the complete output of pe_status_check from all nodes listed by certname:
puppet query 'facts[certname,value] { name = "pe_status_check" }'
-
To find the complete output of agen_status_check from all nodes listed by certname (this could be a large query based on the number of agent nodes, further filtering is advised ):
puppet query 'facts[certname,value] { name = "agent_status_check" }'
-
To find those nodes with a specific status check set to false:
puppet query 'inventory[certname] { facts.pe_status_check.S0001 = false }'
pe_status_check::infra_summary
and pe_status_check::agent_summary
utilize hiera to lookup test definitions, this requires placing a static hierarchy in your environment level hiera.yaml.
plan_hierarchy:
- name: "Static data"
path: "static.yaml"
data_hash: yaml_data
See the following documentation for further explanation.
Place the plan_hierarchy listed in the step above, in the environment layer (https://www.puppet.com/docs/pe/latest/writing_plans_in_puppet_language_pe.html#using_hiera_with_plans)
Create a [static.yaml] file in the environment layer hiera data directory```
pe_status_check::indicator_exclusions:
- '<TEST ID>'
Indicator ID's within array will be excluded when running pe_status_check::infra_summary
and pe_status_check::agent_summary
p
The pe_status_check::infra_summary
and pe_status_check::agent_summary
plans can be run from the PE console or from the command line. Below are some examples of running the plans from the command line. More information on the parameters in the plan can be seen in the REFERENCE.md.
Example call from the command line to run pe_status_check::infra_summary
against all infrastructure nodes:
puppet plan run pe_status_check::infra_summary
Example call from the command line to run pe_status_check::agent_summary
against all regular agent nodes:
puppet plan run pe_status_check::agent_summary
Example call from the command line to run against a set of infrastructure nodes:
puppet plan run pe_status_check::infra_summary targets=pe-server-70aefa-0.region-a.domain.com,pe-psql-70aefa-0.region-a.domain.com
Example call from the command line to exclude indicators for pe_status_check::infra_summary
:
puppet plan run pe_status_check::infra_summary -p '{"indicator_exclusions": ["S0001","S0021"]}'
Example call from the command line to exclude indicators for pe_status_check::agent_summary
:
puppet plan run pe_status_check::agent_summary -p '{"indicator_exclusions": ["AS001","AS002"]}'
This fact is used to determine which individual status checks should be run on each individual infrastructure node. The fact queries which Puppet Enterprise Roles have been classified to each node and uses this to make the determination.
Role | Description |
---|---|
primary | The node is both a certificate authority and a postgres host |
replica | The node has the primary_master_replica role |
pe_compiler | The node has both the master and puppetdb roles |
postgres | The node has just the database role |
legacy_compiler | The node has the master role but not the puppetdb role |
legacy_primary | The node is a certificate authority but not a postgres host |
unknown | The node type could not be determined |
A failure to determine node type will result in a safe subset of checks being run that will work on all infrastructure node types.
This fact is confined to run on infrastructure nodes only.
Refer below for next steps when any indicator reports a false
.
Indicator ID | Description | Self-service steps | What to include in a Support ticket |
---|---|---|---|
S0001 | Determines if the puppet service is running on agents. | See documentation | If the service fails to start, open a Support ticket referencing S0001, and provide syslog and any errors output when attempting to restart the service. |
S0002 | Determines if the pxp-agent service is running. | Start the pxp-agent service - puppet resource service pxp-agent ensure=running , if the service has failed check the logs located in /var/logs/puppetlabs/pxp-agent , for information to debug and understand what the logs mean, see the following links for assistance. Connection Type Issues, if the service is up and running but issues still occur, see Debug Logging |
If the service fails to start, open a Support ticket referencing S0002, provide syslog any errors output when attempting to restart the service, and /var/log/puppetlabs/pxp-agent/pxp-agent.log |
S0003 | Determines if infrastructure components are running in noop. | Do not routinely configure noop on PE infrastructure nodes, as it prevents the management of key infrastructure settings. Disable this setting on infrastructure components. | If you are unable to disable noop or encounter an error when disabling noop, open a Support ticket referencing S0003, and provide any errors output when attempting to change the setting. |
S0004 | Determines if the Puppet Server status endpoint is returning any errors. | Execute puppet infrastructure status . Which ever service returns in a state that is not running, examine the logging for that service to indicate the fault. |
Open a Support ticket referencing S0004, provide the output of puppet infrastructure status and any service logs associated with the errors. |
S0005 | Determines if certificate authority (CA) cert expires in the next 90 days. | Install the puppetlabs-ca_extend module and follow steps to extend the CA cert. | Open a Support ticket referencing S0005 and provide support script output from the primary server, and any errors encountered when using the ca_extend module. |
S0006 | Determines if Puppet metrics collector is enabled and collecting metrics. | Metrics collector is a tool that lets you monitor a PE installation. If it is not enabled, enable it. | If you have issues enabling metrics, open a ticket referencing S0006 and provide the output of the support script. |
S0007 | Determines if there is at least 20% disk free on the PostgreSQL data partition. | Determines if growth is slow and expected within the TTL of your data. If there's an unexpected increase, use this article to troubleshoot PuppetDB | If your Puppet Practitioner is unable to find a cause for the growth and the suggested KB does not help, open a Support ticket referencing S0007 and provide details about large files and folders, rate of growth, and a full support script from the affected node. |
S0008 | Determines if there is at least 20% disk free on the codedir data partition. | See documentation | |
S0009 | Determines if pe-puppetserver service is running and enabled on relevant components. | See documentation | If you are unable to explain the service outage from the logging, or are unable to start the service, open a Support ticket referencing S0009 and provide output of the support script |
S0010 | Determines if pe-puppetdb service is running and enabled on relevant components. | See documentation | If you are unable to explain the service outage from the logging, or are unable to start the service, open a Support ticket referencing S0010 and provide output of the support script |
S0011 | Determines if pe-postgres service is running and enabled on relevant components. | See documentation | If you are unable to explain the service outage from the logging, or are unable to start the service, open a Support ticket referencing S0011 and provide output of the support script |
S0012 | Determines if Puppet produced a report during the last run interval. | Troubleshoot Puppet run failures. | Open a Support ticket referencing S0012 and provide the output of puppet agent -td > debug.log 2>&1 |
S0013 | Determines if the catalog was successfully applied during the last Puppet run. | Troubleshoot Puppet run failures. | Open a Support ticket referencing S0013 and provide the output of puppet agent -td > debug.log 2>&1 |
S0014 | Determines if anything in the command queue is older than a Puppet run interval. | This can indicate that the PuppetDB performance is inadequate for incoming requests. Review PuppetDB performance. Use metrics to pinpoint the issue. | If your are unable to determine the reason from the metrics, open a Support ticket referencing S0014 and provide the output of the support script. and the findings from your analysis of the metrics |
S0015 | Determines if the infrastructure agent host certificate is expiring in the next 90 days. | Puppet Enterprise has built in functionalilty to regenerate infrastructure certificates, see the following documentation | If the documented steps fail to resolve your issue, open a support ticket referencing S0015 and provide the error message received when running the steps. |
S0016 | Determines if there are any OutOfMemory errors in the puppetserver log. |
Increase the Java heap size for that service. | Open a Support ticket referencing S0016 and provide puppet metrics, /var/log/puppetlabs/puppetserver/puppetserver.log , and the output of puppet infra tune . |
S0017 | Determines if there are any OutOfMemory errors in the puppetdb log. |
Increase the Java heap size for that service. | Open a Support ticket referencing S0017 and provide puppet metrics, /var/log/puppetlabs/puppetdb/puppetdb.log , and the output of puppet infra tune . |
S0018 | Determines if there are any OutOfMemory errors in the orchestrator log. |
Increase the Java heap size for that service. | Open a Support ticket referencing S0018 and provide puppet metrics, /var/log/puppetlabs/orchestration-services/orchestration-services.log , and output of puppet infra tune . |
S0019 | Determines if there are sufficent jRubies available to serve agents. | Insufficient jRuby availability results in queued puppet agents and overall poor system performance. There can be many causes: Insufficient server tuning for load, a thundering herd, and insufficient system resources for scale. | If self-sevice fails to resolve the issue, open a ticket referencing S0019 and provide a description of actions so far and the output of the support script. |
S0020 | Determines if the Console status api reports all services as running | Determine which service caused the failure Service Request Format, go to the [logging] (https://www.puppet.com/docs/pe/2023.4/what_gets_installed_and_where.html?_ga=2.219585753.1594518485.1698057844-280774152.1694007045&_gl=1*xeui3a*_ga*MjgwNzc0MTUyLjE2OTQwMDcwNDU.*_ga_7PSYLBBJPT*MTY5ODMyNzY5MS41Ny4xLjE2OTgzMjgyOTIuMTEuMC4w#log_files_installed) of that service and look for related error messages | Open a Support ticket referencing S0020, please provide the name of the service that failed, time of failure, error messages and provide a copy of the Support Script from your primary. |
S0021 | Determines if free memory is less than 10%. | Ensure your system hardware availability matches the recommended configuration, note this assumes no third-party software using significant resources, adapt requirements accordingly for third-party requirements. Examine metrics from the server and determine if the memory issue is persistent | If you have issues with memory utilization in Puppet Enterprise that can not be explained, open a Support ticket, referencing S0021 and provide the output of the support script |
S0022 | Determines the validity of both older and newer types of Puppet Enterprise licenses. | Get help with Puppet Enterprise license issues | Open a Support ticket referencing S0022 and provide the output of the following commands ls -la /etc/puppetlabs/license.key and cat /etc/puppetlabs/license.key . |
S0023 | Determines if certificate authority CRL expires in the next 90 days. | The solution is to reissue a new CRL from the Puppet CA, note this will also remove any revoked certificates. To do this follow the instructions in this module | Open a Support ticket referencing S0023 and provide support script output from the primary server, and errors or output collected from the resolution steps |
S0024 | Determines if there are files in the puppetdb discard directory newer than 1 week old | see documentation | If you are unable to determine a reason for the rejections from logging, Open a Support ticket referencing S0024 and provide a copy of the PuppetDB log for the time in question, along with a sample of the most recent file in the following directory /opt/puppetlabs/server/data/puppetdb/stockpile/discard/ |
S0025 | Determines if the host copy of the CRL expires in the next 90 days. | If the Output of S0023 on the primary server is also false use the resolution steps in S0023. If S0023 on the Primary is True, follow this article | Open a Support ticket referencing S0025 and provide any errors you received in following the resolution steps |
S0026 | Determines if pe-puppetserver JVM Heap-Memory is set to an inefficient value. | Due to an odditity in how JVM memory is utilised, most applications are unable to consume heap memory between ~31GB and ~48GB as such is if you have heap memory set within this value, you should reduce it to more efficiently allocate server resources. To set heap refer to Increase the Java heap size for this service. | |
S0027 | Determines if if pe-puppetdb JVM Heap-Memory is set to an inefficient value. | Due to an odditity in how JVM memory is utilised, most applications are unable to consume heap memory between ~31GB and ~48GB as such is if you have heap memory set within this value, you should reduce it to more efficiently allocate server resources. To set heap refer to Increase the Java heap size for this service. | |
S0029 | Determines if number of current connections to Postgresql DB is approaching 90% of the max_connections defined. |
See documentation | Should you be unable to determine the reason for a recent increase in connection use, or are having issue upping the number of connections available, open a Support ticket referencing S0029 and provide the current and future value for puppet_enterprise::profile::database::max_connections and we will assist. |
S0030 | Determines when infrastructure components have the setting use_cached_catalog set to true. |
Don't configure use_cached_catalog on PE infrastructure nodes. It prevents the management of key infrastructure settings. Disable this setting on all infrastructure components. See our documentation for more information | If you encounter errors after disabling use_cached_catalog, open a Support ticket referencing S0030 and provide the errors. |
S0031 | Determines if old PE agent packages exist on the primary server. | Remove the old PE agent packages. | |
S0033 | Determines if Hiera 5 is in use. | Upgrading to Hiera 5 offers some major advantages | If you're having issues upgrading to Hiera 5 or if your global Hiera configuration file was erroneously modified, open a Support ticket referencing S0033. Provide your global Hiera configuration file puppet config print hiera_config ; the default location is /etc/puppetlabs/puppet/hiera.yaml . |
S0034 | Determines if your PE deployment has not been upgraded in the last year. | Upgrade your PE instance. | If you have issues during a Puppet Upgrade, open a ticket and provide your current version and the version you would like to upgrade to and state any problems, providing any logging that is helpful. |
S0035 | Determines if puppet module list is returning any warnings |
If S0035 returns false , i.e., warnings are present, you should run puppet module list --debug and resolve the issues shown. The Puppetfile does NOT include Forge module dependency resolution. You must make sure that you have every module needed for all of your specified modules to run.Please refer to Managing environment content with a Puppetfile for more info on Puppetfile and refer to the specific module page on the forge for further information on specific dependancies |
If you are unable to remove all the warnings, then please refer to Get help for supported modules and raise a support request |
S0036 | Determines if max-queued-requests is set above 150. |
The maximum value for jruby_puppet_max_queued_requests is 150 |
If you are unable to change the value of jruby_puppet_max_queued_requests or encounter an error when changing it, open a Support ticket referencing S0036 and provide any errors output when attempting to change the setting. |
S0038 | Determines whether the number of environments within $codedir/environments is less than 100 |
Having a large number of code environments can negatively affect Puppet Server performance. See the Configuring Puppet Server documentation for more information. You should examine if you need them all, any unused environments should be removed. If all are required you can ignore this warning. | |
S0039 | Determines if Puppets Server has reached its queue-limit-hit-rate ,and is sending messages to agents. |
Check the max-queued-requests article for more information. | If the article is unable to solve your issue, open a Support ticket referencing S0039, indicating the investigation so far, and any issues you encountered, then provide the support script output from the primary server. |
S0040 | Determines if PE is collecting system metrics. | If system metrics are not collected by default, the sysstat package is not installed on the impacted PE infrastructure component. Install the package and set the parameter puppet_enterprise::enable_system_metrics_collection to true. See the documentation. |
After system metrics are configured, you do not see any files in /var/log/sa or if the /var/log/sa directory does not exist, open a Support ticket. |
S0041 | Determines if the pxp broker on a compiler has an established connection to another pxp broker | See documenation | If unable to make a connection to a broker, raise a ticket with the support team quoting S0041 and attaching the file /var/log/puppetlabs/puppetserver/pcp-broker.log along with the conclusions of your investigation so far |
S0042 | Determines if the pxp-agent has an established connection to a pxp broker | See documenation | If unable to make a connection to a broker, raise a ticket with the support team quoting S0042 and attaching the file /var/log/puppetlabs/pxp-agent/pxp-agent.log (on *nix) or C:/ProgramData/PuppetLabs/pxp-agent/var/log/pxp-agent.log (on Windows), along with the conclusions of your investigation so far |
S0043 | Determines if there are nodes with Puppet agent versions ahead of the primary server | Agent nodes should not be running Puppet agent versions ahead of infrastructure nodes. Instead consider upgrading PE so that PE package management contains the desired Puppet agent version. See the upgrading PE and upgrading agents documentation for more information. | If you are unable to determine why the indicator is evaluating to false or have questions about Puppet agent versions, open a support ticket and reference S0043. |
S0044 | Determines if Puppet Servers are using the the PE classifier for the node data plugin (node terminus) | Due to performance optimizations, it is recommended to use the PE classifier plugin instead of external node classifier (ENC) scripts or applications. See the node_terminus configuration setting documentation for more information. | If you have additional questions about the node_terminus configuration setting, open a support ticket and reference S0044. |
S0045 | Determines if Puppet Servers are configured with an excessive number of JRubies. | Because each JRuby instance consumes additional memory, having too many can reduce the amount of heap space available to Puppet server and cause excessive garbage collections. While it is possible to increase the heap along with the number of JRubies, we have observered diminishing returns with more than 12 JRubies and therefore recommend an upper limit of 12. We also recommend allocating between 1 - 2gb of heap memory for each JRuby. | If you would like to measure the effects of changing JRubies and heap settings, use the Puppet Operational Dashboards module to configure a metrics stack and Grafana dashboards for viewing the metrics. If you still have performance issues or further questions, open a support ticket and reference S0045. |
This fact is confined to run on only agent nodes that are NOT infrastructure nodes.
Refer below for next steps when any indicator reports a false
.
Indicator ID | Description | Self-service steps | What to include in a Support ticket |
---|---|---|---|
AS001 | Determines if the agent host certificate is expiring in the next 90 days. | Puppet Enterprise has a plan built into extend agent certificates. Use a puppet query to find expiring host certificates and pass the node ID to this plan: puppet plan run enterprise_tasks::agent_cert_regen agent=$(puppet query 'inventory[certname] { facts.agent_status_check.AS001 = false }' | jq -r '.[].certname' | paste -sd, -) master=$(puppet config print certname) |
If the plan fails to run, open a support ticket referencing AS001 and provide the error message received when running the plan. |
AS002 | Determines if the pxp-agent has an established connection to a pxp broker | Ensure the pxp-agent service is running, if running check /var/log/puppetlabs/pxp-agent/pxp-agent.log (on *nix) or C:/ProgramData/PuppetLabs/pxp-agent/var/log/pxp-agent.log (on Windows) โ Contains the for connection issues, first ensuring the agent is connecting to the proper endpoint, for example, a compiler and not the primary. This fact can also be used as a target filter for running tasks, ensuring time is not wasted sending instructions to agents not connected to a broker |
If unable to make a connection to a broker, raise a ticket with the support team quoting AS002 and attaching the file /var/log/puppetlabs/pxp-agent/pxp-agent.log (on *nix) or C:/ProgramData/PuppetLabs/pxp-agent/var/log/pxp-agent.log (on Windows) along with the conclusions of your investigation so far |
AS003 | Determines the certname configuration parameter is incorrectly set outside of the [main] section of the puppet.conf file. | The Puppet documentation states clearly certname should always be placed solely in the [main] section to prevent unforseen issues with the operation of the puppet agent https://puppet.com/docs/puppet/7/configuration.html#certname | If unable to determine why the indicator is being raised. Open a ticket with the support team quoting AS003 and attaching the file puppet.conf along with the conclusions of your investigation so far . |
AS004 | Determines if the host copy of the CRL expires in the next 90 days. | If the Output of S0023 on the primary server is also false use the resolution steps in S0023. If S0023 on the Primary is True, follow this article | Open a Support ticket referencing AS004 and provide any errors you recieved in following the resolution steps |
If you are a PE user and need support using this module or encounter issues, our Support team is happy to help you. Open a ticket at the Support Portal. If you have a reproducible bug or are a community user, you can open an issue directly in the GitHub issues page of the module. We also welcome PR contributions to improve the module. Please see further details about contributing.
The Support Knowledge base is a searchable repository for technical information and how-to guides for all Puppet products.
This Module has the following specific Article(s) available:
The Support Video Playlist is a resource of content generated by the support team
This Module has the following specific video content available: