Volume Bug - SWAMP Room Startup Volume about crescendo-for-crestron HOT 5 CLOSED

Thank you for reporting this issue DR7. A simple solution will be to add an abuf to sync Volume_Is & Volume_Set when the zone powers on. Without using aram logic like you suggested, the programmed settings and those done in Sonnex Tool tend to compete with one another.

If you would like your program to manage startup levels in SIMPL rather than Toolbox, I recommend adding an init in the main program to set the values, using the 'Z__System_Initialized!'. Combined with the bug fix, that should address the two issues you're facing.

from crescendo-for-crestron.

Thank you Austin, I will implement this fix today.

from crescendo-for-crestron.

Great. Please report back with the results.

from crescendo-for-crestron.

Austin, while testing I found if I use 'Z__System_Initialized!' this did not work proper and I had the same problem as before, I looked in debugger and noticed this signal is low while the program is running.

I tried running it with a "1" instead and it works the way I want and basically I have an abuf with X-xx__Volume Is coming in and X-01-Volume going out of the abuf and it seems to work just how I want it now.

**Note I also removed the settings from the SWAMP to start the zone(s) at 30% and instead I am using an init to pulse X-xx_Startup_Volume.

from crescendo-for-crestron.

The analog buffer added to Crestron SWAMP modules closes before Volume_Is from the device updates Volume_Set. The previous fix implemented did not resolve the issue, therefor this issue is re-opened.

from crescendo-for-crestron.