adiknoth / madifx Goto Github PK

The command sudo make install fails with following output:

~/src/madifx (master) $ sudo make install
[sudo] Passwort für emt: 
make -C /lib/modules/`uname -r`/build M=/home/emt/src/madifx EXTRA_CFLAGS="-g -Wall -Werror " modules
make[1]: Verzeichnis „/usr/src/linux-headers-5.10.0-19-amd64“ wird betreten
  CC [M]  /home/emt/src/madifx/madifx.o
/home/emt/src/madifx/madifx.c: In function ‘snd_madifx_probe’:
/home/emt/src/madifx/madifx.c:3611:8: error: implicit declaration of function ‘snd_devm_card_new’; did you mean ‘snd_device_new’? [-Werror=implicit-function-declaration]
 3611 |  err = snd_devm_card_new(&pci->dev, index[dev], id[dev],
      |        ^~~~~~~~~~~~~~~~~
      |        snd_device_new
cc1: all warnings being treated as errors
make[3]: *** [/usr/src/linux-headers-5.10.0-19-common/scripts/Makefile.build:291: /home/emt/src/madifx/madifx.o] Fehler 1
make[2]: *** [/usr/src/linux-headers-5.10.0-19-common/Makefile:1856: /home/emt/src/madifx] Fehler 2
make[1]: *** [/usr/src/linux-headers-5.10.0-19-common/Makefile:185: __sub-make] Fehler 2
make[1]: Verzeichnis „/usr/src/linux-headers-5.10.0-19-amd64“ wird verlassen
make: *** [Makefile:26: default] Fehler 2

Any hints due this problem?

is there some progress with integrating your code into the mailine kernel?

i've read this mail, but it seems that there hasn't been much progress on this front.

(i'm aware that this is not really an issue of the code here, which btw, seems to work fine)

Hallo,

we have some strange problems with the driver and the MadiFX card plugged into a HP Proliant DL380 Gen9 server hardware since Linux kernel 5.4. Today I tried many old Ubuntu 18.04.x images to narrow down the kernel version since when the problem occurred. I used a simple speaker-test command like this:

speaker-test -c2 -Dsysdefault:CARD=MADIFXtest

On Ubuntu 18.04.4 with kernel 5.3 the output works fine and speaker-test toggles between "0 - Front Left" and "1 - Front Right". With Ubuntu 18.04.6, which uses kernel 5.4, the speaker-test output just stops at "0 - Front Left".

It is worth mentioning that the same applies to the HDSPe AES and Madi cards which we also tried with the buildin drivers of the kernel. In addition we found that the HDSPe AES card plugged in a Supermicro X13SAQ mainboard does have the same issues. On many other mainboards the cards all work just fine, even with the 6.1 kernel.

We can provide remote access to the server if you wish to find out more details regarding the issue. Any help would be greatly appreciated.

Best regards,
Thomas