nuc_rgb's Introduction

NUC RGB

CLI to control the RGB LED on Intel NUC 11/12 Extreme, for Linux and Windows

英特尔 NUC 11/12 Extreme 的 RGB LED设置工具，适用于 Linux 和 Windows

Requirements

Python3

pyserial~=3.5

Build

Arch Linux

makepkg -fCcs

Windows

pyinstaller -F .\nuc_rgb.py --noupx

Usage

usage: nuc_rgb [-h] [-p SERIAL_PORT] [-c CMD] [-s] [-l]

NUC RGB: CLI to control the RGB LED on Intel NUC 11/12 Extreme, for Linux and Windows

options:
  -h, --help            show this help message and exit
  -p SERIAL_PORT, --port SERIAL_PORT
                        serial port
  -c CMD, --execute CMD
                        execute comma-separated command string
  -s, --status          print RGB LED status
  -l, --list            print command list

Command

RST   # reset default settings
BTN:x # enable or disable all RGB LED
        # x = 0:disable, 1:enable
################################################################################
      # n = A:Skull, B:Bottom_Left, C:Bottom_Right, D:Bottom_Front
nPx   # set Pattern
        # x = 0:Off, 1:Solid, 2:Pulse, 3:Breathing, 4:Strobing,
        #   5:PulseTrain1, 6:PulseTrain2, 7:PulseTrain3, 8:Rainbow1
nV:x  # set Brightness
        # x = [0-5], 0:disable
nR:x  # enable or disable Rainbow
        # x = 0:disable, 1:enable
nD:x  # set Frequency
        # x = [0-5], 0:disable
################################################################################
Ci:x  # set Color
        # i = 1:Skull, 2:Bottom_Left, 3:Bottom_Right, 4:Bottom_Front,
        #   5:Pulse_Train_Color1, 6:Pulse_Train_Color2, 7:Pulse_Train_Color3
        # x = [0-255], 0:Red, 32:Orange, 70:Yellow, 96:Green, 128:Cyan,
        #   160:Blue, 192:Purple, 224:Pink
################################################################################
# example:
nuc_rgb -c "DP1,DV:5,DR:0,C4:96"
  # Bottom_Front LED: Pattern:Solid, Brightness:5, Rainbow:disable, Color:Green
nuc_rgb -c "RST"
  # reset to default settings

nuc_rgb's People

Contributors

Stargazers

Watchers

nuc_rgb's Issues

No COM port with a NUC11PHBi7 running Win11

Hi @AlvinZhu thanks for your python script.
I tried to use it under Windows, but my NUC doesn't expose any COM port. Is there anything to enable in the bios for it to show up? Or is something available ok the Extreme range but not on the Enthusiast models?
Thanks in advance

Recommend Projects