Giter VIP home page Giter VIP logo

ovpn-admin's Introduction

ovpn-admin

Simple web UI to manage OpenVPN users, their certificates & routes in Linux. While backend is written in Go, frontend is based on Vue.js.

Originally created in Flant for internal needs & used for years, then updated to be more modern and publicly released in March'21. Your contributions are welcome!

DISCLAIMER! This project was created for experienced users (system administrators) and private (e.g., protected by network policies) environments only. Thus, it is not implemented with security in mind (e.g., it doesn't strictly check all parameters passed by users, etc.). It also relies heavily on files and fails if required files aren't available.

Features

  • Adding, deleting OpenVPN users (generating certificates for them);
  • Revoking/restoring/rotating users certificates;
  • Generating ready-to-user config files;
  • Providing metrics for Prometheus, including certificates expiration date, number of (connected/total) users, information about connected users;
  • (optionally) Specifying CCD (client-config-dir) for each user;
  • (optionally) Operating in a master/slave mode (syncing certs & CCD with other server);
  • (optionally) Specifying/changing password for additional authorization in OpenVPN;
  • (optionally) Specifying the Kubernetes LoadBalancer if it's used in front of the OpenVPN server (to get an automatically defined remote in the client.conf.tpl template).
  • (optionally) Storing certificates and other files in Kubernetes Secrets (Attention, this feature is experimental!).

Screenshots

Managing users in ovpn-admin: ovpn-admin UI

An example of dashboard made using ovpn-admin metrics: ovpn-admin metrics

Installation

1. Docker

There is a ready-to-use docker-compose.yaml, so you can just change/add values you need and start it with start.sh.

Requirements: You need Docker and docker-compose installed.

Commands to execute:

git clone https://github.com/flant/ovpn-admin.git
cd ovpn-admin
./start.sh

1.1

Ready docker images available on Docker Hub . Tags are simple: $VERSION or latest for ovpn-admin and openvpn-$VERSION or openvpn-latest for openvpn-server

2. Building from source

Requirements. You need Linux with the following components installed:

Commands to execute:

git clone https://github.com/flant/ovpn-admin.git
cd ovpn-admin
./bootstrap.sh
./build.sh
./ovpn-admin 

(Please don't forget to configure all needed params in advance.)

3. Prebuilt binary

You can also download and use prebuilt binaries from the releases page โ€” just choose a relevant tar.gz file.

Notes

  • this tool uses external calls for bash, coreutils and easy-rsa, thus Linux systems only are supported at the moment.
  • to enable additional password authentication provide --auth and --auth.db="/etc/easyrsa/pki/users.db" flags and install openvpn-user. This tool should be available in your $PATH and its binary should be executable (+x).
  • master-replica synchronization does not work with --storage.backend=kubernetes.secrets - WIP
  • additional password authentication does not work with --storage.backend=kubernetes.secrets - WIP
  • if you use --ccd and --ccd.path="/etc/openvpn/ccd" abd plan to use static address setup for users do not forget to provide --ovpn.network="172.16.100.0/24" with valid openvpn-server network
  • tested only with Openvpn-server versions 2.4 and 2.5 with only tls-auth mode
  • not tested with EasyRsa version > 3.0.8
  • status of users connections update every 28 second(no need to ask why =))

Usage

usage: ovpn-admin [<flags>]

Flags:
  --help                       show context-sensitive help (try also --help-long and --help-man)

  --listen.host="0.0.0.0"      host for ovpn-admin
  (or OVPN_LISTEN_HOST)

  --listen.port="8080"         port for ovpn-admin
  (or OVPN_LISTEN_PORT)

  --role="master"              server role, master or slave
  (or OVPN_ROLE)

  --master.host="http://127.0.0.1"  
  (or OVPN_MASTER_HOST)       URL for the master server

  --master.basic-auth.user=""  user for master server's Basic Auth
  (or OVPN_MASTER_USER)
 
  --master.basic-auth.password=""  
  (or OVPN_MASTER_PASSWORD)   password for master server's Basic Auth

  --master.sync-frequency=600  master host data sync frequency in seconds
  (or OVPN_MASTER_SYNC_FREQUENCY)

  --master.sync-token=TOKEN    master host data sync security token
  (or OVPN_MASTER_TOKEN)

  --ovpn.network="172.16.100.0/24"  
  (or OVPN_NETWORK)           NETWORK/MASK_PREFIX for OpenVPN server

  --ovpn.server=HOST:PORT:PROTOCOL ...  
  (or OVPN_SERVER)            HOST:PORT:PROTOCOL for OpenVPN server
                               can have multiple values

  --ovpn.server.behindLB       enable if your OpenVPN server is behind Kubernetes
  (or OVPN_LB)                Service having the LoadBalancer type

  --ovpn.service="openvpn-external"  
  (or OVPN_LB_SERVICE)        the name of Kubernetes Service having the LoadBalancer
                               type if your OpenVPN server is behind it

  --mgmt=main=127.0.0.1:8989 ...  
  (or OVPN_MGMT)              ALIAS=HOST:PORT for OpenVPN server mgmt interface;
                               can have multiple values

  --metrics.path="/metrics"    URL path for exposing collected metrics
  (or OVPN_METRICS_PATH)

  --easyrsa.path="./easyrsa/"  path to easyrsa dir
  (or EASYRSA_PATH)

  --easyrsa.index-path="./easyrsa/pki/index.txt"  
  (or OVPN_INDEX_PATH)        path to easyrsa index file

  --ccd                        enable client-config-dir
  (or OVPN_CCD)

  --ccd.path="./ccd"           path to client-config-dir
  (or OVPN_CCD_PATH)

  --templates.clientconfig-path=""  
  (or OVPN_TEMPLATES_CC_PATH) path to custom client.conf.tpl

  --templates.ccd-path=""      path to custom ccd.tpl
  (or OVPN_TEMPLATES_CCD_PATH)

  --auth.password              enable additional password authorization
  (or OVPN_AUTH)

  --auth.db="./easyrsa/pki/users.db"
  (or OVPN_AUTH_DB_PATH)      database path for password authorization
  
  --log.level                  set log level: trace, debug, info, warn, error (default info)
  (or LOG_LEVEL)
  
  --log.format                 set log format: text, json (default text)
  (or LOG_FORMAT)
  
  --storage.backend            storage backend: filesystem, kubernetes.secrets (default filesystem)
  (or STORAGE_BACKEND)
 
  --version                    show application version

Further information

Please feel free to use issues and discussions to get help from maintainers & community.

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.