anavitechnology / anavi-light-controller Goto Github PK

Hello

I did not find any official support channels so I'm putting my (most likely user-)issue here: I have been using the Light Controller for a good amount of time now without any problems. I've hooked up a few additional sensors to track temperature, humidity and light intensity: HTU21D, BH1750 and SHT31 (for which I have added support myself). All the sensors have worked flawlessly for more than a year.

I'm running the Light Controller in a Home Assistant Setup. The problem is that all of a sudden I stopped getting sensor data into my MQTT broker, for any of the sensors. I can still send commands to the Light Controller to control the lights, but it just won't send any sensor data. Of course I did several resets and flashed the original firmware but without success.

Is this a known issue or is there any way to debug to find out what the problem might be? I'm using Mosquitto and these are the only relevant logs I could find:

Tue Apr 19 18:54:15 2022: New connection from 192.168.1.27 on port 1883.
Tue Apr 19 18:54:15 2022: Client anavi-light-controller-4af09a0ea709ffdc47d2a9fc1cf81f9 has exceeded timeout, disconnecting.
Tue Apr 19 18:54:15 2022: Socket error on client anavi-light-controller-4af09a0ea709ffdc47d2a9fc1cf81f9, disconnecting.
Tue Apr 19 18:54:15 2022: New client connected from 192.168.1.27 as anavi-light-controller-4af09a0ea709ffdc47d2a9fc1cf81f9 (c1, k15, u'').

Any help is appreciated!

Hello,

Can this project support a 12v 3A input for a 10m RGB LED strip ?

I don't know if all electronics components can support up to 3A.

Thanks for the reply