andreasrsa / clamtk Goto Github PK

What steps will reproduce the problem?
1. Open up Clam5.01
2. There is no scheduler.
3.

What is the expected output? What do you see instead?
I expected to see a scheduler option.  Has this been omitted?

What version of the product are you using? On what operating system?
Clam5.01 for Ubuntu 13.04.

Please provide any additional information below.

Is this to be added later?

What steps will reproduce the problem?
1. When i click on Scan a directory (in my language calling: Einen Ordner 
überprüfen), it does norhing. Starts clamtk in terminal, get this messages:
clamtk 
*** unhandled exception in callback:
***   Cannot decode string with wide characters at 
/usr/lib/perl5/5.12.3/x86_64-linux-thread-multi/Encode.pm line 174.
***  ignoring at /usr/lib/perl5/vendor_perl/5.12.3/ClamTk/GUI.pm line 129.
 The same thing on Scan a file

I'm using here clamtk 5.03 and latest clam version 0.98.1.
My running system is 
PCLinuxOS-LXDE64bit up to date.

In /usr/lib/perl5/5.12.3/x86_64-linux-thread-multi/Encode.pm line 174 is 
written:
my $string = $enc->decode( $octets, $check )

and in /usr/lib/perl5/vendor_perl/5.12.3/ClamTk/GUI.pm 129
Gtk2->main;

What I'm missing here?
Thanks for any suggestions
Daniel

What steps will reproduce the problem?
1.Click on program
2.
3.

What is the expected output? What do you see instead?
Expected: GUI
What I see: Bouncing mini-icon, then info spinning icon, then nothing.

What version of the product are you using? On what operating system?
Latest download-no ver 5.x works.
Opsys: Kubuntu 14.10

Please provide any additional information below.

What steps will reproduce the problem?
1.I downloaded clamtk via Menu/System/Synoptic management (free translation)
No problems to install clamtk 4.38
The program warns that GUI version is expired. Update within the program is not 
possible
2. If I go to the website of Clamtk version 5.05 is available
But I have the possibility to download versions :
main program : Debian/Ububtu DEB/Ubuntu12xx Legacy DEB/ source/Ubuntu 12.xx 
Legacy Source 
users Xfce thunar-send to - clamtk 0.05 : Debian/ubuntu DEB/ source

3. I have no clue which programs I need to download ?

What is the expected output? What do you see instead?
/

What version of the product are you using? On what operating system?
clamtk 4.38
Linux Mint 13  Xfce

Please provide any additional information below.
/

What steps will reproduce the problem?
1. Open Clamtk.
2. Double-click on "Scheduler".
3. Change the values from 0 to another value
4. Click "Close".
5. Double-click on again "Scheduler".

What is the expected output? What do you see instead?
I expect to see the new value instead of "0" for all of the fields, because 
otherwise it is unclear whether or not the new values you entered have been 
save. It would be more useful (if in fact this is not a bug and it is actually 
saving the new values you enter) for it to display the new values instead of 
just "0"s, but in fact if it is updating the configuration for it with the 
values from the fields which at default display "0"s, then surely opening it 
and then making no changes and clicking "Close" will change the values back to 
"0"s.

What version of the product are you using? On what operating system?
I am using Clamtk v5.11 on Ubuntu 14.04.

What steps will reproduce the problem?
1. Install ClamTk on XFCE or Xubuntu

What is the expected output? What do you see instead?
Expected behavior is that the application will show in the menu, it does not

What version of the product are you using? On what operating system?
Clamtk 5.06 Debian Jessie Xfce4 Desktop

Please provide any additional information below.

Please consider changing the /usr/share/applications/clamtk.desktop file to 
make Clamtk show in XFCE desktops. Commenting the show only line will make it 
show in XFCE, see attached. 

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check 
permissions!).
ERROR: Problem with internal logger (UpdateLogFile = 
/var/log/clamav/freshclam.log).

The gnome-shell tray has most alerts for crashes, new e-mails, etc...

Would be nice if virus alerts showed up there as well from scheduled virus 
scanning runs.

What steps will reproduce the problem?
0. sudo apt-get install clamtk 4.? -> ran a scan
1. went to www site, installed 5.?  
2. Tired alt-F2 clamtk -> nothing
3. In terminal: -> nothing except this error message
~$ clamtk
Can't locate object method "new" via package "Gtk2::InfoBar" (perhaps you 
forgot to load "Gtk2::InfoBar"?) at /usr/share/perl5/ClamTk/GUI.pm line 100.
~$ ^C
~$ clamtk --version
Can't locate object method "new" via package "Gtk2::InfoBar" (perhaps you 
forgot to load "Gtk2::InfoBar"?) at /usr/share/perl5/ClamTk/GUI.pm line 100.  

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system? Ubuntu + 
Gnome with no effects. ~2003 pentium 2.4GHz ex win xp machine

Please provide any additional information below.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
v5.07 Linux Mint 17

Please provide any additional information below.
Don't seem to find the old button to upload false positives, so the database is 
corrected? Is that supposed to be "automatically" done when I use the "analyse" 
option?

What steps will reproduce the problem?
1. Click for open aplication.
2. message error
3.

What is the expected output? What do you see instead?
- Message error: (spanish)
  2No se pudo reconocer el formato de imagen del archivo �/usr/share/pixmaps//clamtk.png� at /usr/share/perl5/ClamTk/GUI.pm line 38.

What version of the product are you using? On what operating system?
- Debian 8.1
- Linux 3.16.0-4-amd64

Please provide any additional information below.
- The last task as update debian jessie stable repositories.

Sorry for my english.

What steps will reproduce the problem?
1. Download deb file from this page https://code.google.com/p/clamtk/
2. Install using GDebi package installer. Warns that repository has older 
version.
3. Start up clamtk, nothing really does anything. 
https://code.google.com/p/clamtk/

What is the expected output? What do you see instead?
I expect it to give some response other than changing buttons.  See 
http://screencast.com/t/lVtfhZSDkwo

What version of the product are you using? On what operating system?
Version 5.13 in Lubuntu 14.04.


Please provide any additional information below.
Was originally using 4.85, but it would not scan any files. Even when I chose 
recursive scan on file system or chose directory full of files, it would not do 
anything.  Always said 0 files scanned. Decided to use current version so came 
to code.google.com to get new deb. Installed it, and find nothing at all works 
in the GUI. Sorry I can't help with more details, but I'm not exactly a power 
user.

What steps will reproduce the problem?
1. Installing the latest ClamTk (version 5)
2. Run a scan on the filesystem
3.

What is the expected output? What do you see instead?
I expect to see a normal progress bar, indicating the progress of the scan.  
Instead, I see a progress bar that get wider and wider, so that the current 
progress indicator remains at the center of the bar

What version of the product are you using? On what operating system?
version 5 on Ubuntu 12.04


Please provide any additional information below.

What steps will reproduce the problem?
1. I have removed and reinstalled  4.45. and 5.?
2. the icon appears in the HUD when click it works for a few seconds the does 
nothing
3. thanks in advance I love clam and trust it 

    Hp DV8000

What steps will reproduce the problem?
1.Trying to open ClamTK
2.
3.

What is the expected output? What do you see instead?
Expected ClamTK gui window.

Results:

From menu: bouncing mini icon, then spinning lines and "ClamTK" in bottom bar. 
These disappear in a few seconds. 

From Konsole: Icon 'gtk-new' not present in theme at 
/usr/share/perl5/ClamTk/GUI.pm line 281.

Fix from #38: "sudo apt-get install gtk-new"  -did not work.

What version of the product are you using? On what operating system?

5.18 on Kubuntu 15.04

Please provide any additional information below.

What steps will reproduce the problem?
1. install clamtk 4.45 from ubuntu software center with engine virus 0.98.1
2. it indicates 0 signatures
3. it does not update signatures automatically
4. the same happens with the latest version 5.07, with the exception that that 
it indicates 19229 signatures are available and installed

What is the expected output? What do you see instead?

I think the signatures are in the order of some million

What version of the product are you using? On what operating system?

4.45 and 5.07 / Ubuntu 14.04

Please provide any additional information below.

I expect also for 5.07 version the right clicking scanning option on a file, 
but nothing happens when it right clicks a file

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

What steps will reproduce the problem?
1. I downloaded .deb package;
2. I tried to install with gdebi;
3. I got the error shown in attachment.

What is the expected output? What do you see instead?

-
What version of the product are you using? On what operating system?

   - Debian Squeeze

Please provide any additional information below.
-

What steps will reproduce the problem?
1. Install the deb package
2. Run in command line

What is the expected output? What do you see instead?

Icona �gtk-new� non presente nel tema at /usr/share/perl5/ClamTk/GUI.pm 
line 260.

What version of the product are you using? On what operating system?

Clamtk 5.10, kubuntu 14.04.1 amd64

Please provide any additional information below.

Hello,
This is not a bug but a Malware undetected by Clam Antivirus - I report it here 
as I don't see the dedicated page.
The Malware in  'Avis.de.Paiement.zip' was identified as 'RDN/Downloader.a!ph' 
by McAfee: please see 'RDN.pdf' and 'RDN.jpg' attached.
Thanks for your attention,
Mikhail

Fresh install clamtk.

[mustafa@FoMus ~]$ clamtk
Icon 'gtk-new' not present at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 234.



clamtk-5.02-1 version is on Arch Linux with KDE


Thanks

What steps will reproduce the problem?
1. run a scan
2. any malware or PUA shows up in results
3.

What is the expected output? What do you see instead?
I would like to see options to 'Quarantine All' and 'Delete All' in the results 
window.


What version of the product are you using? On what operating system?
Clamtk 5.13
Ubuntu 14.04


Please provide any additional information below.

Last time I ran a scan, I had 110 PUA's, and I had to quarantine each one 
seperately!

What steps will reproduce the problem?
1. Clicking on app icon in Dash Home
2. entering "clamtk" in terminal
3.

What is the expected output? What do you see instead?
GUI didn't appear on desktop

What version of the product are you using? On what operating system?
clamtk 5.05-1 on Ubuntu12.04.3 64bit

Please provide any additional information below.
output from terminal from calling "clamtk":
Can't locate object method "new" via package "Gtk2::InfoBar" (perhaps you 
forgot to load "Gtk2::InfoBar"?) at /usr/share/perl5/ClamTk/GUI.pm line 100.

Please suggest a way to delete detected viruses when multiple viruses are 
found, selecting and deleting each one is very tedious when (sometimes) viruses 
are found in hundreds.

I am using Mint 17

What steps will reproduce the problem?
1. Installed on SolydX XFCE i386
2. Go to Updates
3. States Updates are available - but does not show Update Botton on 
Highlighted bar

What is the expected output? What do you see instead?
I see the Highlighted bar with "Updates are available" and a Green Ball on 
Graphical Interface (5.07 is available - 5.05 installed) but no Update button 
on highlighted bar


What version of the product are you using? On what operating system?
Version 5.05 installed on SolydX XFCE i386


Please provide any additional information below.
I used Synaptics to reinstall all modules and rebooted afterward
Same results

BTW - I did successfully get the clamd daemon to run at startup! :)

What steps will reproduce the problem?
1. I opened ClamTK version 5.02 with sudo
2. clicked opn update twice
3. clicked UPDATE

What is the expected output? What do you see instead?
I expected to see progress bar of download. In console i can see an error:

*** unhandled exception in callback:
***   Illegal division by zero at /usr/share/perl5/ClamTk/Update.pm line 365.
***  ignoring at /usr/share/perl5/ClamTk/GUI.pm line 129.


What version of the product are you using? On what operating system?
Clam AntiVirus: Bytecode Testing Tool 0.97.8
ClamTk 5.02

crunchbang 3.2.0-4-amd64 unknown unknown GNU/Linux based on debian wheezy
system up to date


Please provide any additional information below.
ATI videocard hd5570 lastestdrivers, system stable, everything works just fine:D

What steps will reproduce the problem?
1. Scheduled nightly scan
2. Open history for scan after it runs (my history says it found 51 infected 
files)
3. go to quarantine to remove files... there are none!

What is the expected output? What do you see instead?
I had expected 51 files in the quarantine... and there are none.

What version of the product are you using? On what operating system?
5.04 of clamtk - ubuntu 12.04


Please provide any additional information below.
Not much further to add... just that perhaps there is a setting that I'm not 
finding that is the option to "Put infected files in Quarantine?" or something 
like that

Thanks!

What steps will reproduce the problem?
1.i try manual update
2.i get outdated virus defenitions
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
clam tk 5.13 on fedora 21

Please provide any additional information below.

theres a screeshot of my screen with all details

What steps will reproduce the problem?
1. Configure clamtk Network, setting http proxy host and port (no user auth 
required)
2. Follow the (unnecessarily verbose) Update procedure to get the virus 
database updated
3. Receive nothing

What is the expected output? What do you see instead?

Expect: successful VD update, and a message stating that the update succeeded.
Got: nothing, but an error message (see below).

What version of the product are you using? On what operating system?

Clamtk 5.06 (so much vorse than the good old clamtk-4! I wish I could get it 
back instead).
Ubuntu 14.04 LTS


Please provide any additional information below.

~$ clamtk
LibClamAV Warning: **************************************************
LibClamAV Warning: ***  The virus database is older than 7 days!  ***
LibClamAV Warning: ***   Please update it as soon as possible.    ***
LibClamAV Warning: **************************************************
LibClamAV Warning: **************************************************
LibClamAV Warning: ***  The virus database is older than 7 days!  ***
LibClamAV Warning: ***   Please update it as soon as possible.    ***
LibClamAV Warning: **************************************************
problems getting remote AV: 500 Can't connect to www.clamav.net:80 (timeout)
LibClamAV Warning: **************************************************
LibClamAV Warning: ***  The virus database is older than 7 days!  ***
LibClamAV Warning: ***   Please update it as soon as possible.    ***
LibClamAV Warning: **************************************************
LibClamAV Warning: **************************************************
LibClamAV Warning: ***  The virus database is older than 7 days!  ***
LibClamAV Warning: ***   Please update it as soon as possible.    ***
LibClamAV Warning: **************************************************
problems getting remote AV: 500 Can't connect to www.clamav.net:80 (timeout)

Option to exclude all malware after the scan and from the quarantine.

What steps will reproduce the problem?
1. freshclam --datadir=/home/michael/.clamtk/db 
--log=/home/michael/.clamtk/db/freshclam.log --user=michael

What is the expected output? What do you see instead?
ClamAV update process started at Mon Jan  5 15:26:19 2015
ERROR: Can't open /home/michael/.clamtk/db/freshclam.log in append mode (check 
permissions!).


What version of the product are you using? On what operating system?
5.10

Please provide any additional information below.
I review linux distros and always install clamTk; it's great thanks! However 
the folder .clamtk is never created and the file /etc/clamtk/clamd.conf is 
never created. I normally install from a Software Center or use Synaptic. This 
is not a problem for me but for a novice linux user it would be a deal breaker. 
I think you need to review your config scripts in the .deb package.

What steps will reproduce the problem?
1. Attempted to update ClamTK. Clicked on the Debian or Ubuntu 13/14 DEB link, 
and selected to open it from the Ubuntu Software Center.
2. In the software center, I clicked to update ClamTK.


What is the expected output? What do you see instead?
When it was finished, it generated an error window, "Package operation failed. 
The installation or removal of a software package failed."


What version of the product are you using? On what operating system?
ClamTK 5.10 in Ubuntu 14.10.

Please provide any additional information below.
A text file is attached with the details of the "Package operation failed" 
error message.

(Reading database ... 237594 files and directories currently installed.)
Preparing to unpack /tmp/clamtk_5.19-1_all.deb ...
Unpacking clamtk (5.19-1) over (5.09-1~ubuntu14.04.1) ...
dpkg: error processing archive /tmp/clamtk_5.19-1_all.deb (--install):
 trying to overwrite '/usr/share/nautilus-python/extensions/clamtk.py', which is also in package clamtk-nautilus 5.09-1~ubuntu14.04.1
dpkg-deb (subprocess): decompressing archive member: lzma write error: Broken 
pipe
dpkg-deb: error: subprocess <decompress> returned error exit status 2
dpkg-deb (subprocess): cannot copy archive member from 
'/tmp/clamtk_5.19-1_all.deb' to decompressor pipe: failed to write (Broken pipe)
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Processing triggers for mime-support (3.54ubuntu1.1) ...
Processing triggers for gnome-menus (3.10.1-0ubuntu2) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu1) ...
Processing triggers for bamfdaemon (0.5.1+14.04.20140409-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
14.04; Ubuntu Trusty Tar

Please provide any additional information below.
[email protected]

What steps will reproduce the problem?
1.Did the update thru Ubuntu 
2.Appeared to update 
3.Did not run 

What is the expected output? What do you see instead?
I realize I don't really need a virus checker but it is nice to see what has 
come down. Instead of working it just hangs. When I went to the bash and ran it 
I get:

Can't locate object method "new" via package "Gtk2::InfoBar" (perhaps you 
forgot to load "Gtk2::InfoBar"?) at /usr/share/perl5/ClamTk/GUI.pm line 100.


What version of the product are you using? On what operating system?

Ubuntu 12.04 ran fine as ver 5.07 but got the error after updating to 5.08.


Please provide any additional information below.

What steps will reproduce the problem?
attempt to install (as root) clamtk after installing all Perl dependencies:

[root]# rpm -ivh clamtk-5.10-1.el6.noarch.rpm

What is the expected output?

successful installation of RPM.

What do you see instead?

error: Failed dependencies:
        perl(Glib) is needed by clamtk-5.10-1.el6.noarch
        perl(Gtk2) is needed by clamtk-5.10-1.el6.noarch
        perl(Gtk2) >= 1.248 is needed by clamtk-5.10-1.el6.noarch
        perl(IO::Socket::SSL) is needed by clamtk-5.10-1.el6.noarch
        perl(JSON) is needed by clamtk-5.10-1.el6.noarch
        perl(Locale::gettext) is needed by clamtk-5.10-1.el6.noarch
        perl(Text::CSV) is needed by clamtk-5.10-1.el6.noarch

What version of the product are you using?

clamtk-5.10

On what operating system?

CentOS 6.3 64-bit

Please provide any additional information below.

Perl dependencies are installed...

[root]# perl -e "use Glib;"
[root]# perl -e "use Gtk2;"
[root]# perl -e "use IO::Socket::SSL;"
[root]# perl -e "use JSON;"
[root]# perl -e "use Locale::gettext;"
[root]# perl -e "use Text::CSV;"

The problem & solution:

1. I'm have 500+  suspicious (infected) files in Results windows
2. Delete / transfer in quarantine with the mouse very uncomfortable
3. I propose to add shortcuts (for example, META+D and META+Q or "delete" and 
"insert") to improve usability!


What version of the product are you using?
I'm using version 5.03

On what operating system?
Kubuntu 13.10

Please provide any additional information below.
None

Hi Dave,

it would be grate the option "scan the hole PC" in the timing. It was in the 
4.38, but it seems in 5.04 not. My sytem is Ubuntu 12.04.

Thank You and thanks for this software!

Levi

What steps will reproduce the problem?
1. launch clamtk from terminal
2. the GUI says updates are available, double click update and it shows GUI is 
5.07 no update available, but shows 0 signatures installed with 19141 available
3. press OK and it says signatures are current but still shows 0 signatures 
installed, nothing gets updated and in terminal the line:
"/usr/bin/sigtool: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.20' not found 
(required by /usr/lib/libclamav.so.6)" no quotes continues to repeat itself 
even though the file is present in /usr/lib

What is the expected output? that the signatures will update What do you see 
instead? says they're up to date after pressing ok to update them but there are 
no signatures, hence unable to scan any file it says they're all good (because 
its checking them with no signatures to check for)


What version of the product are you using? 5.07 clamtk On what operating 
system? Archlinux 3.14.1-1


Please provide any additional information below.
root@arch-bill /home/bill # /usr/lib/libstdc++.so.6 | grep GLIBCXX              

[1]    11163 segmentation fault (core dumped)  /usr/lib/libstdc++.so.6 | 
       11164 exit 1                            grep --color=auto GLIBCXX

Try to install ClamAv to my Ubuntu 12.04 OS. But now I see this issue:
Failed to get 
http://security.ubuntu.com/ubuntu/pool/main/c/clamav/clamav_0.97.8+dfsg-1ubuntu1
.12.04.1_amd64.deb  404  Not Found [IP: 91.189.91.14 80]

I try to install it by using terminal (sudo apt-get install clamtk or clamav)
There is no network troubles.

Regards, M.

What steps will reproduce the problem?
1.Installing latest version of ClamTK using .deb from your website.
2.Clicking on ClamTK icon in Utilities.
3.

What is the expected output? What do you see instead?
Appears on KDE open programs panel that program is trying to load. After a 
minute or so the open program icon on bar disappears without the program 
loading.

What version of the product are you using? On what operating system?
March 8, 2015 using latest 5.1.5 (I think) downloaded from this website. OS 
Linux Mint 17.1 64-bit with KDE desktop.

Please provide any additional information below.
After clicking on the downloaded package, it appears to install OK, 
dependencies good. Older version from Software Manager works fine.

What steps will reproduce the problem?
1. Install clamtk
2. Open a text console
3. Set $LANGUAGE to "ru_RU" or verify
4 Launch clamkt

What is the expected output? What do you see instead?
The main window appears. No main window and an error message on the console:
[QA test system]
Cannot decode string with wide characters at 
/usr/lib/perl5/5.14.2/i386-linux-thread-multi/Encode.pm line 174.
[My personal system]
Cannot decode string with wide characters at 
/usr/lib/perl5/vendor_perl/5.14.2/x86_64-linux-thread-multi/Encode.pm line 175.

What version of the product are you using? On what operating system?
5.05 on Linux (Rosa Fresh 2012.1 x86_64)

Please provide any additional information below.
I'm a contrib packager for Rosa Linux and OpenMandriva; I'm trying to update 
the distro package from the old 4.45 to the latest clamtk release (5.05).

The QA test on i586, before official publishing, fails with the above error
message; being Rosa a Russian-based distro, the default LANGUAGE/LANG setting 
on the test systems is "ru_RU". On my personal system (defaulting LANGUAGE/LANG 
= en_GB.UTF-8) all works as expected.

Some thing we did try:
 * on the QA system: changing LANG to "en_GB.UTF-8": error message e no window;
 * on the QA system: changing LANG to "en_GB": WORK;
 * on my system: changing LANG to "ru_RU": WORK;
 * on my system: changing LANGUAGE to "ru_RU": error message e no window.

This is similar to the problem in issue #6, but here we have no main window at 
all.
I'm not a perl guy, but by looking at the files in lib I would guess that the 
trouble originates in the decode call in App.pm, line 454.

What steps will reproduce the problem?
1. Click "History"
2. Select anyone log and click "Delete"
3. Thus, after removal of one log window loses mouse focus in history

What is the expected output? 
After removal of the focus should be in the window of log (next after that is 
removed) is to be highlighted

What do you see instead?
Thus, after removal of one log window loses focus in history


What version of the product are you using? On what operating system?
Clamtk 5.11
Kubuntu 14.04

Please provide any additional information below.
None

The older version in the Ubuntu repos has the feature to drag and drop files 
from nautilus to clamtk without opening a file dialog. The current repo version 
is 4.45 or so, I think.

What version of the product are you using? On what operating system?
I am on Ubuntu 13.10, kernel 3.11.0-17-generic-amd64. Recently upgraded to 
Clamtk 5.04 and cannot drag/drop files without opening a file dialog.


Please provide any additional information below.
It was always sweet to drag/drop files right onto the interface. Loving the 
work you have put into clamtk, thank you.

What steps will reproduce the problem?
1. Install ClamTK in Ubuntu 14.04
2. Click the ClamTK icon in the launcher

What is the expected output? What do you see instead?

Expect to see the GUI.  Instead nothing happens.

What version of the product are you using? On what operating system?

Tried several versions, most recent was 5.15-1_all
Ubuntu 14.04.1, have applied Mbuntu transformation package from 
http://www.noobslab.com/2014/11/mbuntu-macbuntu-1410-transformation.html

Please provide any additional information below.

If I do sudo clamtk from a terminal I get this:

/usr/share/themes/MBuntu-Y-For-Unity/gtk-2.0/widgets/panel.rc:18: Unable to 
locate image file in pixmap_path: "images/panel/panel-normal.svg"
/usr/share/themes/MBuntu-Y-For-Unity/gtk-2.0/widgets/panel.rc:21: Background 
image options specified without filename
/usr/share/themes/MBuntu-Y-For-Unity/gtk-2.0/widgets/panel.rc:27: Unable to 
locate image file in pixmap_path: "images/panel/panel-active.svg"
/usr/share/themes/MBuntu-Y-For-Unity/gtk-2.0/widgets/panel.rc:30: Background 
image options specified without filename
/usr/share/themes/MBuntu-Y-For-Unity/gtk-2.0/widgets/panel.rc:61: error: 
invalid string constant "button", expected valid string constant
Icon 'gtk-new' not present in theme at /usr/share/perl5/ClamTk/GUI.pm line 280.