Antergos user has no password (minimal branch)

To be able to log in, a password is needed.

Add an icon in the desktop to open a terminal.

Oh, and I haven't checked if the key shortcut super+t is working on minimal.

Only en is available. Cnchi can't set the correct locale if it's not en.
@lots0logs
I think a possible fix should be uncommenting all available locales in locale.gen

There's some GPG keys problem and it does not update anything (pacman does not work).

If you format the drive as FAT32, then copy the files to it and set it bootable it works fine

See Antergos/Cnchi#326

See Antergos/Cnchi#326

No autostart for openbox (minimal branch). An autostart file with this:

sudo cnchi &

is needed.

Please add 'powerpill' to ensure fastest download speed during installation.

After each boot of XFCE desktop, is volume of main channel muted.
i have googled this bug report: https://bugzilla.xfce.org/show_bug.cgi?id=5091
which says, that it is not XFCE related. I have tried command "alsactl store", but issues stays anyway.
Maybe it is Antergos related.

Please give me some instructions, how to debug this issue. It is very annoing.

See here: http://forum.antergos.com/viewtopic.php?f=5&t=1450&p=6228#p6228

I am new to linux, sorry.
I was trying Antergos in live environment.
I tried to open some archived/compressed files, but nothing happened.
I found that, 7-Zip FM was unable to start.

RE: Antergos/Cnchi#503

I don't know what is the point where it does it, but at least after the automatic updating I have two cnchis of the same version running.

I think is because gnome-themes-standard not being installed but I couldn't test it

You can see it mentioned in line 93 and 168

ntpd service is not enabled, time is wrong and then pacman fails in some circumstances.

sudo systemctl enable ntpd fixes it.

When i boot antergos(august and testing iso too) with selected slovak language, then i cant mount my HDD in Gnome files - i get error wirh d-bus. But if i run antergos without changing language, mounting works.

Slim has default background, not the Antergos one (minimal branch)

I won't have time to fix this until after work but I didn't want to forget. This should remind me 😄

Since there is no wifi options in live version, there is no way to fix it easily or install antergos when having (a fairly common) broadcome wifi card. In my case this card is installed on lenovo G 780 laptop.

This issue was present many months ago in old release and exists still till now.
Apparently antergos iso is missing some packages to run that card.

https://forum.antergos.com/topic/3566/live-cd-cannot-boot-on-uefi-computer/

It seems that Arch, KaOS and others boot, but Antergos doesn't.

At least Ubuntu and I think Fedora have it and if something is wrong, they will tell you.

I thought about this because of #31 as I usually always perform that test when I create bootable USB, but Antergos doesn't have it.

No .xinitrc (minimal branch)

Slim needs one like:

!/bin/sh

exec openbox-session

UEFI boot is broken. I only tested on virtualbox, but based on the feedback we have been getting from users, its safe to say this is not a VM-only issue. I found this bug report upstream that claims it's fixed: https://bugs.archlinux.org/task/31894 I am downloading the latest arch iso to test now. Will update...

Update: Latest Arch image boots successfully in VM. Will look into this further as soon as I can.

When booting a live USB using any of the testing ISOs and select Antergos x86_64 UEFI USB, I get.
"Failed to open file EFI\archiso\intel_ucode.img
Trying to load files to higher address
Failed to open file EFI\archiso\intel_ucode.img"

Copying intel_ucode.img from \arch\boot\ inside the USB to EFI\archiso\ lets the USB boot normally.

https://i.imgur.com/oDklmUw.jpg

Having pamac in live gives problems to pacman (db.lck being blocked)

I think we should remove pamac from live ISO (or at least disable it).

I just downloaded the Minimal ISO 64bit (antergos-minimal-2015.03.07-x86_64.iso) and booted up, and encountered a typo:

As you can see, it sais

To start the system enter 'start and press

it should say

To start the system enter 'start' and press

It's missing an '. If we're gonna be picky, the grammar is incorrect aswell. It should say

To start the system, enter 'start' and press

Not sure if right repo but I can't get 3/20 release to boot on skylake. It dies everytime on setting clocksource. Was able to get the most recent arch with 4.4.5 to boot no problems.

Let me know if you need more information

Currrently when antergos is first started alt-f2 has to be pressed then the user has to type Orca when normally super-alt-s can be pressed to turn on the screen reader.

I have been using the minimal iso recently in virtualbox. The font in the lxternimal looks horrid and is particularly hard to read.

Running fc-match monospace matches to a regular font, hence the bad rendering.

Any chance of adding a monospace true type font for the terminal.

ISO SHA256: aa6f7d4c6bbeafba25ef5516f90815fed588406d92efcfcd4b49da4fb85ec511

I don't know if you are already aware of this issue and I hope this is the right place to report it.

The latest isos (2016.04.22) are affected by this bug: https://bugs.archlinux.org/task/48598

Because I was unfortunate with the minimal-install ISO ( ref : Antergos/Cnchi#283 ) I decided to test the full-ISO ; this one does boot in a broken Gnome with the 'Oh no' message fullscreen and maximised.

Only notification appearing "VboxClient: the VirtualBox Kernel...." ( the Gnome notification speech bubble size trim the text; and even mouse-hover this item refuse to show the full content of the error message.

( note : I don't run this in VirtualBox ; this is a ISO image written on a USBdrive , and booted on a PC I have since 4 years, who already installed dozens of distros ... A Dell vostro 'Linux ready' machine ; with only bad hardware is the Broadcom based eth0 wired connection ... A pain for plain Arch, but usually fine with Antegos or Manjaro )

Clicking in the only button 'Log Out' just restart Gnome with the same issue, it's an infinite loop.

From #16

I downloaded latest minimal 32bit iso for installation. but it failed to detect my USB dongle device. so i cant create data connection. however this is not the same with live iso. it works fine and and detect my usb modem. please fix it for minimal iso.

https://forum.antergos.com/topic/3350/minimal-iso-doesnt-detect-usb-mobile-broadband-internet

For new users it might be nice to implement the choice to choose another Desktop Environment for the live environment at bootup.

As of now, Libreboot (and maybe Coreboot as well) cannot boot the Antergos Live ISO automatically, possibly requiring a manual boot, although I haven't yet been successful doing it manually.

It would be great to have Antergos booting from Libreboot automatically :)

If even a manual workaround is found, that would already be fantastic!

I have selected slovak language at boot, but Cnchi is always in english, notifications with cnchi updating too.
Default keyboard in Cnchi is english and they should be slovak too.

Hope this is the right place for this. I ran memtest from the 2015.01.11 iso on 3 different machines (one being a VirtualBox VM) and got bitten by this bug:
https://bugs.launchpad.net/ubuntu/+source/memtest86+/+bug/1071209

I get a lot of dump text messages in a VM (virtualbox)

Then lightdm appears.

EDIT: I managed to get a screenshot

The touch select/activate on the the touchpad also doesn't work, have to press the touchpad left button just like a separate mouse to accomplish this. After the install, touch all does work properly though!

I am unable to install because the driver modules I need for my wifi card are missing. It is a Broadcom chip that uses the b43 (old proprietary module) and or the brcmsmac module (newer and open source). It is also missing the r8101 module for my ethernet port.

I can't for the life of me get VM detection (open-vm-tools?) to work properly.

When I deploy Antergos in a VMware environment, most of the guest functions work as expected, but I have never once gotten cursor capture and copy/paste to work.

What Antergos does: Cursor is locked to VM unless I release
What every other distro (including Manjaro) does: Cursor transitions seamlessly to and from VM and host/vcenter

Are the proper drivers and kernel modules not present by default?

If use default GTK theme bad working and some options not visible on Cnchi.
Release: antergos-minimal-2016.03.20-x86_64.iso
For example,
Select Location:

Hard drive settings (More item not visible)

This solved if delete GTK config and use Adwaita GTK Theme, and run Installer again:

rm -rf ~/.gtk*
rm -rf ~/.config/gtk*

See Antergos/Cnchi#81

[Minimal] testing.sh uses hwinfo, but it's not installed in the ISO

Minimal iso is right now 556MB aprox. This should be less. But how?

My pkg cache (Gnome and Openbox) is 1.3GB, this means user will have to download more or less a 2GB iso, which is too much.

This always occurs in vbox, I don't have any real hardware to test. Should we switch to Grub2 for UEFI?