This code is for educational purpose only. Feel free to use this code on your own risk.
- Raspberry pi
- RDM6300 RFID Reader (125Khz)
- 2 resistors for voltage dividing (5v to 3v output)
- Raspi power supply
- pyserial: install using the command
python -m pip install pyserial
- Disable all bluetooth services
- Open the file
/boot/config.txt
and add this linedtoverlay=disable-bt
- run the following commands.
sudo systemctl disable hciuart.service
sudo systemctl disable bluealsa.service
sudo systemctl disable bluetooth.service
- Open the file
- Enable
UART
and disableSSH serial