This board allow to capture the serial output from the Amiga to a usb/COM port. You can use it along with Diagrom rom (http://www.diagrom.com/) to diagnose problems on any Amiga.

Just connect the board to the Amiga and the usb to your computer, open a terminal on Windows or Linux, etc with a program like Putty, choose the COMport number and you will able to "LISTEN" what the Diagrom has to say.

The board uses an FTDI 232RL chip. This chip does not require any drivers on windows. It will be detected a COMport. Ex COM3. Then on the Putty configuration, set: COMport number, 9600 BPS, hit connect, then turn on your amiga and you are done.

If you find any error on this description, please drop me an email to [email protected] or If you like the project or want to support it, you can buy me a beer or a KO-FI :)

27/04/2020: Initial release.

This is a work in progress, several testing has been made but it should work as is. I take no responsibiltiy for any damage to any equipment that results from the use of this board.

https://lcsc.com/product-detail/USB-Connectors_SHOU-HAN-MICRO-4P-DIP_C456008.html

Shield:

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.