#Controlling the Chabot via a Kinect
Chabot, is a humanoid robot built at Chalmers as a bachalor thesis link.
This project uses a kinect sensor to control the Chabot. OpenNI and OpenCV are used to detect and track a human. The angles are measured using vector calculations and then filtered. which are then sent over a TCP socket to the the robot code to be deciphered, checked for range and redundancy of data before being sent to the robot.
##File Structure
Required Libraries contains all the libraries to run the kinect. Use this guide link to install the kinect drivers, and required files. ChabotContol- has the project files and code for the kinect. Chabot-Hardware interface has the files for the chabot.