Microchip Wireless Sensor Network

Create a Wi-Fi/ MiWi (15.4) / LoRa wireless sensor network to monitor the temperatures covering a wide area like a hotel or a plant.

Case study: Classrooms temperature monitoring during Microchip MASTERS conference held at JW Marriot desert ridge, AZ

View the demo (Live only during MASTERS conference)

Features

Monitors sensor data (temperature, battery level and RSSI)
Covers 34-35 locations over a vast area of approx. 1 km2
Secure communication with AWS IoT for Wi-Fi and MiWi
Device independent web interface to easily view data
Data logging to csv file
Battery operated devices
Showcase different technologies tackling the same task

Smart Secure Connected

Microchip Wireless Sensor Network
- Features
Overview
- Technologies used
- Block diagram
Cloud
End nodes

Overview

At MASTERS 2018, we monitored temperatures conference-wide using 3 different networks simultaneously reporting into a single, easily accessible dashboard hosted online to view the information of 34 locations. In addition, for LoRa implementation we added a golf course node that is placed outside of the hotel to showcase LoRa long range capabilities.

The system is compromised mainly of two parts:

Cloud side code
Local infrastructure and end nodes

The same demo and functionality can be achieved using any of the 3 technologies. However, each technology has its own strengths and drawbacks. We provide this explanation and the supporting code to aid microchip customers choose the technology that suits their application best.

Note: the code here is provided AS IS and was not tested for production quality. It has some knowm issues in the cloud section that we mention later on. You are fully responsible to test and adapt the code on your own system.

Technologies used

Web page Front End

The user needs a portal to view the data. To make a platform independent view that doesn't require installation or a password we choose to display the data on a HTML + JavaScript webpage.

The webpage is only a tool that retrieve the data from a data end point, it can be replaced by a phone application or added to a per user view in a final product.

Data endpoint API

To make our application modular and independent on the Front End implementation, whether it's a website or a mobile application. we decided to implement a RESTful API using Flask

The data is returned as JSON object from the endpoint and can be viewed here.

Server hosting

For the purpose of this demo, we used Amazon EC2 ubuntu virtual machine instance (since we were already using AWS IoT core) to easily manage all of our services on the same interface..

However, the same could be achieved with DigitalOcean as an alternative. In a commercial real world application, you will probably have your own server and this step is unnccessary.

Cloud IoT core

For the sake of this demo, when using Wi-Fi or 802.15.4 (MiWi) we decided to go with Amazon AWS IoT core.

When using LoRa & LoRaWAN, you have to register and use one of the LoRaWAN service providers like **The Things Network (TTN) **or senet.

For the purpose of this demo we went with TTN. We also had success with converting this demo to senet in India but this is outside of the scope of this page.

End point

The design and technology used in end nodes can be either:

Wi-Fi (IEEE 802.11)
MiWi (microchip proprietory IEEE 802.15.4)
LoRa (proprietory Sub-GHz)

When choosing end nodes user needs to consider:

Power budget.
Available Infrastructure.
Required coverage range.
Running cost.
Secuirty.
Deployment effort.

each of these points are discussed in the end node sections below.

Block diagram

The diagram above summarize the system. End nodes are in sleep mode until a given time where it wakes up, sends the data to the gateway and then goes back to sleep.

LoRa and MiWi need a dedicated gateway to bridge from LoRa/MiWi to Wi-Fi before sending the data to the cloud. Wi-Fi has an advantage that it doesn't need a dedicated Gateway if there is Wi-Fi coverage already which is the case for our Hotel location.

The data is sent to Cloud servicer provider. AWS IoT for Wi-Fi and MiWi and TTN for LoRa. Our Flask application will then get the data and provide a modular Data end point that our webpage can present. The flask application and the web interface both colocate on our AWS EC2 instance.

The user then can access our web page from any device anywhere he wants.

Cloud

In this section we discuss how to setup the cloud portion of the demo.

AWS

we utilize two services from AWS in this demo, AWS EC2 as a server hosting platform. and AWS IoT for Wi-Fi and MiWi end nodes MQTT broker.

AWS EC2

To host your server you will have to create a virtual machine EC2 instance before you deploy apache into it. The process is easy and straight forward once you have your AWS account ready.

For a step by step guide please follow the amazon guide here.

For our demo we went with free this instance type: ubuntu Server 16.04 LTS free tier (upgraded to medium during conference to accomodate demand)

At security setting, allow access to inbound & outbound HTTP, HTTPS and SSH traffic. you can also adjust the security setting to your liking. Also, please keep the private key to access the instance safe so you can push your data in it and control the server.

To access your server, follow the guides available in amazon website here. ###AWS IoT Wi-Fi and MiWi end nodes will need to connect to AWS IoT core to send sensor data over MQTT.

To set up AWS IoT Cloud, you can follow the user guide of AWS Zero Touch Provisioing Kit project (From Section 2 Software Installation to Section 5 AWS IoT Just-In-Time Registration Setup ) User needs to create Lambda function, AWS IoT Rule and IAM role for AWS provision.

AWS Zero Touch Provisioing Kit is a project about provisioning the Zero Touch Secure Provisioning Kit to connect and communicate with the Amazon Web Services (AWS) IoT service. The user guide of AWS Zero Touch Provisioing Kit project can be found from below: http://microchipdeveloper.com/iot:ztpk

TTN

Server

once you have your EC2 instance up and running after following the steps above, you will need to install apache and point it to host our web page and the flask application.

EC2 instance already comes with python, make sure you git pip as we will need it later on. $ sudo apt-get update and sudo apt-get install python3-pip

Flask data application

First, install flask on your EC2 instance: $ pip3 install Flask

copy the "Server/wsn_server.py" file to the EC2 instance.

Now let's describe parts of the code that you will want to modify and adapt to your application:

Node location dictionary

you will find dictionaries named "USMastersNodeLocation" and "IndiaMastersNodeLocation".. the reason is, we wanted our boards to be reused for multiple demo location without changing the code on the board, so we give each node a number and use this dictionary to map the node to the room it's put inside.

for example, Node4 during US masters on "Desert Suite 4". then we shipped the same node to india and put it on "Dominion" room. this way the same node, with the same code can be used for different location just by changing the flask application without the need to physicall program the device.

Updating the code physically on the board is not always convenient in the field. We encourage you to think of methods like this and plan ahead to avoid updating the board FW.

#our Rooms database
USMastersNodeLocation = {
    "Node1": "Desert Suite 1",
    "Node2": "Desert Suite 2",
    "Node3": "Desert Suite 3",
    "Node4": "Desert Suite 4",
    "Node5": "Desert Suite 5",
    "Node6": "Desert Suite 6",
    "Node7": "Desert Suite 7",
    "Node8": "Desert Suite 8",
    "Node9": "Pinnacle Peak 1",
    "Node10": "Pinnacle Peak 2",
    "Node11": "Pinnacle Peak 3",
    "Node12": "Wildflower A",
    "Node13": "Wildflower B",
    "Node14": "Wildflower C",
    "Node15": "Grand Canyon 1",
    "Node16": "Grand Canyon 2",
    "Node17": "Grand Canyon 3",
    "Node18": "Grand Canyon 4",
    "Node19": "Grand Canyon 5",
    "Node20": "Grand Canyon 9",
    "Node21": "Grand Canyon 10",
    "Node22": "Grand Canyon 11",
    "Node23": "Grand Canyon 12",
    "Node24": "Grand Sonoran A",
    "Node25": "Grand Sonoran B",
    "Node26": "Grand Sonoran C",
    "Node27": "Grand Sonoran D",
    "Node28": "Grand Sonoran H",
    "Node29": "Grand Sonoran I",
    "Node30": "Grand Sonoran J",
    "Node31": "Grand Sonoran K",
    "Node32": "ATE / Grand Canyon 6",
    "Node33": "Cyber Cafe / Grand Sonoran G",
    "Node34": "Grand Saguaro East/West",
    "Node35": "Golf course"
}

Data logging

we store the data we receive on a CSV file. the file location and name is specified on line 141-143.

###################################
###### Files to store data ########
###################################
wifiFile = open('/home/c43071/WSN/wifiData.csv', 'a')  
miwiFile = open('/home/c43071/WSN/miwiData.csv', 'a') 
loraFile = open('/home/c43071/WSN/loraData.csv', 'a') 
WiFiWriter = csv.writer(wifiFile)
MiWiWriter = csv.writer(miwiFile)
LoRaWriter = csv.writer(loraFile)

MQTT subscriber

To get notifications from end node, the application need to subscribe to AWS IoT core and TTN servers (or any server you choose)

AWS IoT MQTT client

we used the publickly provided pythond code for AWS IoT. to use it, please go to amazon github repo here.

our code can be used as is if you replace the certificates path with your certificate path.

# For certificate based connection
myMQTTClient = AWSIoTMQTTClient("WSNClientID")

# For TLS mutual authentication with TLS ALPN extension
myMQTTClient.configureEndpoint("a3adakhi3icyv9.iot.us-west-2.amazonaws.com", 443)
myMQTTClient.configureCredentials("/home/c43071/WSN/VeriSign.pem", "/home/c43071/WSN/WSN_BE_private.pem", "/home/c43071/WSN/WSN_BE_certificate.pem")
myMQTTClient.configureOfflinePublishQueueing(-1)  # Infinite offline Publish queueing
myMQTTClient.configureDrainingFrequency(2)  # Draining: 2 Hz
myMQTTClient.configureConnectDisconnectTimeout(10)  # 10 sec
myMQTTClient.configureMQTTOperationTimeout(5)  # 5 sec
myMQTTClient.connect()

The code expect the topics to be known and one topic per technology. the user can use different topics with different access if he wish.

myMQTTClient.subscribe("/Microchip/WSN_Demo/WiFi", 1, WiFiCallback)
myMQTTClient.subscribe("/Microchip/WSN_Demo/MiWi", 1, MiWiCallback)

The code expects a json object with the format: {'nodeID': "Node1", 'Battery': "4.99V", 'Temperature': 81.46, 'RSSI': -55}

TTN IoT MQQTT client

The thing network doesn't require mutual authentication or certificates to connect like AWS, instead they rely on username and password. Hence we show case how to connect to their server using the "flask_mqtt" package.

from flask_mqtt import Mqtt

app.config['MQTT_BROKER_URL'] = 'us-west.thethings.network'
app.config['MQTT_BROKER_PORT'] = 1883
app.config['MQTT_USERNAME'] = 'jwmarriottdesertridge'
app.config['MQTT_PASSWORD'] = ''
app.config['MQTT_REFRESH_TIME'] = 1.0  # refresh time in seconds
mqtt = Mqtt(app)

@mqtt.on_connect()
def handle_connect(client, userdata, flags, rc):
    print ("MQTT connected!!!\r\n")
    mqtt.subscribe('jwmarriottdesertridge/devices/+/up')

@mqtt.on_message()
def handle_mqtt_message(client, userdata, message):

You will notice that the message payload for LoRA is a little bit different than Wi-Fi and MiWi, this is due to TTN gateway adding some info to the end node payload and due to us trying to minimize the pay load as much as possible to decrease power used and increase effeciency. please refer to the LoRa section below.

###Apache

There are plethora of apache tutorials and content out there, we just mention the deviations here.

First, get apache and wsgi for flask: sudo apt-get install apache2 libapache2-mod-wsgi-py3

Create a wsgi file: vi wsn_demo.wsgi

put this in the above file:

import sys
sys.path.insert(0, '/var/www/html/WSN')

Create a symlink so that the project directory appears in /var/www/html: $ sudo ln -sT ~/WSN /var/www/html/WSN

Enable wsgi: sudo a2enmod wsgi

Configure apache (you will need to sudo to edit the file) $ sudo vi /etc/apache2/sites-enabled/000-default.conf

we will create 2 virtual host, one for the data end point and one for out website.

Line 9 & 49 below indicate your website name. Line 14 have your wsgi file location.

Paste this in "000-default.conf" after making your host modifications as mentioned above:

<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        ServerName demo2.microchip.com

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html
        WSGIDaemonProcess WSN threads=5
        WSGIScriptAlias / /var/www/html/WSN/wsn_demo.wsgi

        <Directory WSN>
                WSGIProcessGroup WSN
                WSGIApplicationGroup %{GLOBAL}
                Order deny,allow
                Allow from all
        </Directory>

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>


<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        ServerName demo.microchip.com

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/Masters

        DirectoryIndex index.html

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>

Restart the Server: $ sudo apachectl restart

Now you need to make a dns entry that will map from "demo.microchip.com" & "demo2.microchip.com" to the public IP address of the EC2 instance.

once that is done, go ahead and view your data in a link similar to: http://demo2.microchip.com/WSN/Data/LoRa/

and the website will be similr to: (depending on how you configured apache and where you put your HTML files): http://demo.microchip.com/WSN/Masters/

HTML website

when you inspect the HTML pages we provide at "Server\US IoT Network\IoT Network"

thee important file is "scripts.js" which go and read the data from our data endpoints above.

The rest is just HTML files containing a table and SVG files for the location map.

End nodes

In this section we describe the necessary steps to start sending sensor data to the cloud using each respective technology.

Wi-Fi

Reasons you may want to choose Wi-Fi as your end node:

**Advantages of WiFi **

Non-Prevasive: Wi-Fi infrastructe is already availabe in many place (hotels, malls, airports ..etc) making the system easy to deploy and doesn't require any external gateways.
Speed: sensor network is not usually a high bandwidth demanding task. but if you want to support features like in field OTA or high bandwidth then Wi-Fi is your best option.
Payload size: Other networks like LoRa puts a limit on your payload size.
Cost: No gateway cost required, no need to pay for usage subscription.
Power cord connected devices.

Reasons that makes Wi-Fi a less ideal options:

If there is no deployed Wi-Fi infrastructre in the area or a plan to do so.
If the application is battery powered AND it require very frequent connection (e.g each 5 min) .. Wi-Fi on battery is viable for applications with low volume infrequient connection.

Demo summary

The Wi-Fi board sleeps for a period of time that is configurable. When it wakes up, it checks to see if the sensor reading has changed since last reported to the cloud. If it chooses to update the reading, it will connect to the AP usning the Wi-Fi module and authenticate with AWS cloud using the Crypto-Auth chip (ECC508) and send the updated values.

The board need to be provisined first time only before it can be used, we go through this below.

Hardware used:

For The demo we used the IoT sensor bord which contain an MCU (SAML21) and a Microchip Wi-Fi module (ATWINC1500) and other sensors.

For more info on the HW please go to this page Here.

The board is not available for purchase at the moment @microchip direct. it was distributed to MASTERS conference attendees for Free and will be added later for purchase option. In the mean time, you can do the same using the AWS Zero touch kit.

Firmware update

To flash firmware to the board, please go through the options Here.

Software requirements

Please head over to this page to install the necessary tools.

Steps to get up and running

Now. if you want to use Wi-Fi the steps are like this:

get the cloud section done first. Your AWS account should be ready so the node can connect to it.
Provision the WINC1500 and the ECCx08 device to connect to your AWS account.
Flash the code to the MCU (SAML21) that will actually connect to AWS and start publishing MQTT messages.

The first step is covered in the cloud section. you can also go ahead to aws.amazon.com and follow their guide incase they changed the steps. we will cover the 2nd and 3rd steps here.

Provisioning ECC608 device and WINC1500 to your AWS account

The ECC608 device is the valut that protect your device identity and authenticate with the AWS cloud.

To provision your ECC608 device, please follow the steps Here.

Once you're done with the steps above, your ECC608 is provisioned. The remaining part is to Store the device certificate on the WINC1500.

This can be done programatically from the application side by calling: m2m_ssl_send_certs_to_winc The above is suitable for production. an alternative is by using the tool in this guide.

Programming SAML21 to connect and publish to AWS IoT

Once both the ECC608 and WINC1500 are provisioned. You can finally flash the board with the real application.

The application example on the Wi-Fi folder contain reference code to do so.

There are to projects there:

ECC608_provisioning: contains code that help put WINC1500 in FW update mode and provision the ECC608. you don't need to use this project if you have followed the steps above. Feel free to explore the main.c if you wish.
IoT_sensor_board_AWS_MQTT: This is the project that do the actual MQTT publishing to the cloud, here we describe the main points.

AP configuration

You can change the AP SSID and password that you want to connect to on Lines 61/63 on main.h

Node name

The node name is on Line 73, on main.h

sleep code and duration

The SAML21 goes to sleep and wakes up on RTC interrupt. The MCU will go to sleep upon a call to: system_sleep(); and wakes up when the RTC interrupt is received. To control the duration for RTC interrupt, configure the count in the function "configure_rtc_count" on rtc.c,, the sleep duration depend on how often you want to refresh the data and your power budget.

MQTT client ID

You have to enter the MQTT client ID to be similar to the subject ID in your device certificate. enter the client ID into the "gAwsMqttClientId" variable in Line 95 of "winc15x0.c"

Running the code

That's pretty much it, now go to main.c file, read the main function and get familiar with it and when you're ready, build and Flash the SAML21 with the code.

If you are logged into the AWS test consle ans subscribing to the Wi-Fi topic mentioned above (/Microchip/WSN_Demo/WiFi) you should see a new message received once the board runs.

LoRa

Introduction LoRa stands for Long Range. LoRaWAN stands for Long Range Wide Area Networks. LoRaWAN is the network on which LoRa operates. LoRaWAN is a media access control (MAC) layer protocol but mainly is a network layer protocol for managing communication between LPWAN gateways and end-node devices as a routing protocol, maintained by the LoRa Alliance. Version 1.0 of the LoRaWAN specification Some of the applications that can be accomplished using LoRa are Smart parking and vehicle management, Facilities and infrastructure management, Fire detection and management, Waste management, Home automation for IoT enables smart appliances, Smart farming and livestock management, Temperature and moisture monitoring, Water level sensors and irrigation control.

Advantages of LoRaWAN

Long battery life due to low power consumption
Low cost implementation due to low cost hardware and unlicensed spectrum
Long range coverage and in-building penetration
Secure Network
Scalable network to support future upgrades
Ease of access and connectivity to the cloud applications
Remote management and control access

Demo Introduction Temperature of rooms spread across a huge resort was monitored using the LoRa. A typical LoRa Application can be developed by having 4 components End Device, Gateway, Network Server and Application Server. End Device with Temperature sensor (running on batteries) was used to demonstrate the advantages of LoRaWAN such as low power, secure and long range.

Hardware

End Device used for this demo was Explorer LoRa Board for UA/AUS
Gateway used was the The Things Gateway
Internet Connectivity
Battery Pack with 3 AAA 1.5V batteries to Power the end device

Software

Network Server used was the The Things Network
Application Server used was Flask Application described in earlier section
Arduino IDE
Ardunio End Device Application Project (\LoRaWAN\JW_Marriott_Desert_Ridge)

Step by Step Procedure to replicate Demo

Installing libraries is the first step before starting to work with JW_Marriot_Desert_Ridge Proj Install:
- RTC: Found here on github (https://github.com/arduino-libraries/RTCZero)
- In order to use the features of the ExploRer starter kit, for instance pinout definition and LoRa features through the API methods, user should add the library to the Arduino environment Include the library files listed below by using the menu sketch ? Include Library ? Add .Zip Library: File Name: LoRa_RN2xx3.zip
To enable Battery Voltage Measurement follow steps in guide Battery Voltage Measurement document Issue is previous releases of Sodaq Arduino board files did not define that VBAT_MEASURE pin so it could not be referenced. Updates to support VBAT_MEASURE pin will happen soon.
- Find your variant.cpp file in the Sodaq board package within the Arduino install. My variant.cpp file was located in this directory C:\Users\CXXXX\AppData\Local\Arduino15\packages\SODAQ\hardware\samd\1.6.18\variants\sodaq_explorer. Depending upon your Arduino installation and version, it might be slightly different.
- Open variant.cpp file with any editor and make the following addition: Find in the file, the table with this name: const PinDescription g_APinDescription[]= After the last line in the table, add the following: //48 Vbat { PORTB, 5, PIO_ANALOG, PIN_ATTR_ANALOG, ADC_Channel13, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // VBAT When user is done with the changes to file, the end of the table Should look something like this: // 47 Button { PORTA, 14, PIO_OUTPUT, PIN_ATTR_DIGITAL, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_14 }, // BUTTON //48 Vbat { PORTB, 5, PIO_ANALOG, PIN_ATTR_ANALOG, ADC_Channel13, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // VBAT
- User can then add the following line, #define VBAT_MEASURE (48u) Into the file variant.h at the same path as variant.cpp or Or user could probably just add #define VBAT_MEASURE 48 in the main sketch. Then save the file’s.
- Then user can read the battery voltage (mV) with this code:
```
'#define ADC_AREF 3.3f'
'#define BATVOLT_R1 4.7f'
'#define BATVOLT_R2 10.0f'
'#define VBAT_MEASURE 48'    
	pinMode(VBAT_MEASURE, INPUT);
	uint16_t getBatteryVoltage()
	{
		pinMode(VBAT_MEASURE, INPUT); 
		uint16_t voltage = (uint16_t)((ADC_AREF / 1.023) * (BATVOLT_R1 + BATVOLT_R2) / BATVOLT_R2 * (float)analogRead(VBAT_MEASURE));
		return(voltage);
	}
```

Tips: if the reported voltage is slightly off or variable/noisy, user can do some averaging of the adc reading

Gateway Registration and Provisioning the end device will enable a user to create a Network Server Account, register their gateway and end device. After creating/signing up for an account, connect your gateway to the Things Network Server. Follow steps in the following link for Gateway registration
Once the Gateway is online, "Create an Application" followed by "Create a new device" section for registering the application and end device to TTN When creating the Application and End Device in TTN. The following are the things to be taken care while creating EUI and Keys in TTN for this application. Choose to create any App EUI and Dev EUI automatically. App key (16 bytes) should be AppkeyPrefix + Dev EUI which is part of source code in project JW_Marriot_Desert_Ridge Proj. Note: App Key can be anything of user's choice. Demo uses a cancatenation method for deriving the App Key and its not mandatory for App developers to use this method. By Default, AppKeyPrefix is {0xFF, 0xEE, 0xDD, 0xCC, 0xBB, 0xAA, 0x99, 0x88}; Dev EUI can be modified as highlighted in the figure
Once the end device is created in The Things Network Console and necessary code changes have been made in the Application source code for devEUI and AppEUI. We will be using OTAA method of join for our Application.
Before programming the source code to the SAMD21 on Sodaq Board, ensure in board manager that the version 1.6.11 is installed for board package support for Sodaq Xplorer Boards.

Program the Sodaq Xplorer kit using bootloader mode. Hit reset twice in quick succession and program the Sodaq Xplorer kit using Arduino. TTN has a feature called TTN Functions which allows users to change bytes, sent over The Things Network, to human readable fields. To add the API for this demo, go to Applications ? XXXX ? Payload Formats XXXX denotes your Application Name chosen

Go to Decoder Section and save the below decoder function

Decoder Function:

 function Decoder(bytes, port) {
 var length = bytes.length;
 if(length == 6){
 var temperature = (bytes[0] <<8) | bytes[1];
 var battery = (bytes[2] <<8) | bytes[3];
 battery = battery/100 + "V";
 var time = bytes[4] + ":" + ('0' + bytes[5].toString(10)).slice(-2);
 return{
 "temperature": temperature /100,
 "battery": battery /// 100, // this operation now is done in earlier step
 "time": time
 };
 }else
 {
 var result = "";
 for (var i = 0; i < length; i++) {
 result += String.fromCharCode(parseInt(bytes[i]));
 }
 return {
 "msg": result,
 };
 }
 }

After configuring the decoder and programming the board with the Application Source code. The App data should start appearing.

# Registration Links

MiWi

Introduction MiWi stands for Microchip Wireless. MiWi is a proprietary wireless protocols designed by Microchip Technology that use small, low-power digital radios based on the IEEE 802.15.4 standard for wireless personal area networks (WPANs). It is designed for low data transmission rates and short distance, cost constrained networks, such as industrial monitoring and control, home and building automation, remote control, low-power wireless sensors, lighting control and automated meter reading. MiWi protocol supports three network topologies

Peer to Peer (P2P)
Star
Mesh

Advantages of MiWi

Long battery life due to low power consumption
Low cost implementation due to low cost hardware and unlicensed spectrum
Long range coverage and in-building penetration when using Sub GHz Radios
Secure Network
Over the Air Upgrade Firmware Upgrade
Customizable
Quick Time to Market
Lower Memory Footprint
No licensing Fee

Demo Introduction Temperature of rooms spread across a huge resort was monitored using the MiWi Star Network Topology.

A typical MiWi Application can be developed by having 2 components. Pan Coordinator and End Device. End Devices can FFD/RFD type. RFD end devices were used for the purpose of this demo because of the capability to go to sleep. End Device with Temperature sensor (running on batteries) was used to demonstrate the advantages of

Hardware

Pan Coordinator (ATSAMR30-XPRO + ATCRYPTOAUTH-XPRO-B (connected to EXT3 of r30xpro)+ ATWINC1500-XPRO(connected to EXT1))
End Device (ATSAMR30-XPRO + ATIO1-XPRO)
Internet
Battery Pack with 3 AAA 1.5V batteries to Power the End Device

Software

Atmel Stdio 7+ (IDE)
ASF 3.35+
Visual C++ 2015 Build Tools
Python3
“”install with pip” with the following packages: pip install “package_name”
- cryptography
- boto3
- pytz
- hidapi
- pyasn1
- requests_aws4auth
- Open SSL
- AWS CLI
Terminal emulator: TeraTermor PuTTY
CA create & register(\MiWi\CA create & register)
WINC1500 Firmware Upgrade files (\MiWi\WINC1500 FW update R30 XPRO)
ECC Provisioning using SAMR30 XPRO(\MiWi\ECC Provisioning SAMR30 XPRO)
Pan Coordinator Application Project (\MiWi\Pan Coordinator SAMR30 XPRO)
End Device Application Project(\MiWi\End Device SAMR30 XPRO)

Generic Information What is AWS IoT? AWS IoT is a managed cloud platform that lets connected devices easily and securely interact with cloud applications and other devices. What is AWS Lambda? AWS Lambda is a computing service that runs code in response to events and automatically manages the computing resources required by that code. Device Registration: “JITR” Happens once at the start for each new device Lambda Function Lambda function is a way to automate thing creation. Lambda function will trigger when a unknown device with known CA connects Summary of things lambda function will handle

AWS reads the unique device name from its certificate
Creates a policy and attach it to the device certificate
Creates a "thing" which represents a single IoTdevice
Activates the devices certificate

Step by Step Procedure to replicate MiWi Demo

Create AWS account
- Create a user, ZTUser
- Create a group, ZTGroup and attach two policy types (AWSIoTFullAccessand AWSLambdaFullAccess)
- Assign user ZTUser to group ZTGroup Follow steps in section III. Create and Administer your own AWS Account mentioned in link
Lambda setup For lambda setup follow the steps mentioned in section“V. AWS IoTJust-In-Time Registration Setup" link
Create certificate ecosystem For the purpose of this demo we create our own trust chain Run the scripts here to:
- Create Root CA and it’s key. ca_create_root.py
- Create CSR and its key ca_create_signer_csr.py
- Create Signer CA ca_create_signer.py
The following certificates will be generated root-ca.crt/key signer-ca.crt/key
Register our CA with AWS IoT In the last step CA certificate was generated, AWS require user to register and Activate it so it can trigger the Lambda function when a device using the CA connects to it. Part of the registration require that user to prove that user does have the Private key to the CA. steps for registration
- Request a registration code from AWS IoT
- Create a verification certificate around that registration code
- Sign the verification certificate with the Signer CA
- Supply both the Signer CA certificate and verification certificate when registering
In order to accomplish the steps for registration user has to - Configure AWS CLI Credentials Open a command prompt Navigate to “C:\Program Files\Amazon\AWSCLI” Type “awsconfigure” Enter info from the user account credentials file - Run aws_register_signer.py
Provision ECC608 To provision the ECC608 user needs to:
- Generate device Public/Private Key pair and Create a CSR for device certificate.
  
  Open the SAMR30 XPRO ECC solution on Atmel Studio 7, connect the EDBG USB ATWINC1500-XPRO board on EXT1 and ATCRYPTOAUTH-B XPRO board on EXT3 of ATSAMR30-XPRO Open TeraTerm and set the following settings Program the solution to ATSAMR30-XPRO and terminal window will have public key and csr displayed.
- Generate device certificate. To generate the WINC device certificate:
  - Open the“generate device certificate.py” script.
  - Copy and paste the CSR data from your terminal to “csr” variable in line 16 and save.
  - Run the python script - "generate device certificate.py".
- Store the certificate data into WINC1500. To store the certificate data in to WINC1500
  - Open Atmel Studio, new example project and WINC1500_FIRMWARE_UPDATE as shown in figure Note: Firmware Update project is not available for SAMR30 Xplained Pro currently. We will hack the existing project to store the certificate data onto WINC1500 XPRO
  - Go to the FW update project directory.
  - Rename the device cert to winc_ecdsa.cer and add it to (Replace): WINC1500_FIRMWARE_UPDATE_PROJECT2\src\firmware\tls_cert_store
  - Add the signer CA “.cer” to: “make sure there is no other CA” WINC1500_FIRMWARE_UPDATE_PROJECT2\src\firmware\tls_cert_store\CA
  - Add AWS root cert "root-ca"to WINC1500_FIRMWARE_UPDATE_PROJECT2\src\firmware\Tools\root_certificate_downloader\binary
  - Copy Paster Items
    - Copy and paste file (replace) download_all.bat from "\MiWi\WINC1500 FW update R30 XPRO" to "\WINC1500_FIRMWARE_UPDATE_PROJECT2\src\firmware"
    - Copy and paste file *samr30_xplained_pro_serial_bridge.elf *from "\MiWi\WINC1500 FW update R30 XPRO" to "WINC1500_FIRMWARE_UPDATE_PROJECT2\src\firmware\Tools\serial_bridge". The serial bridge firmware source for ATSAMR30-XPRO and WINC1500 XPRO combination is available for user in "\MiWi" folder. This example demonstrates how to implement a EDBG UART to WINC1500 SPI bridge.
    - Copy and paste file samr30_xplained_pro_firmware_update.bat from "\MiWi\WINC1500 FW update R30 XPRO" to "\WINC1500_FIRMWARE_UPDATE_PROJECT2\src"
    - Run samr30_xplained_pro_firmware_update.bat file to update the firmware on WINC1500. When upgrading firmware ensure ATSAMR30-XPRO is connected to EDBG USB and ATWINC1500-XPRO to EXT1 header of R30 XPRO
Connect to AWS IoTCloud and publish to a thingName
- open “MIWi P2P ECC AWS” solution.
- Open kit-info.json in python files directory.
- Copy “endpointAddress” value to AWS_IOT_MQTT_HOST in file “aws_iot_config.h”
- Copy “thing_name” to “gAwsMqttClientId” variable in winc15x0.c
- Connect the CryptoAuth board to EXT3 of the SAMR30 XPRO board and ATWINC1500-XRPO to EXT1 of ATSAMR30-XPRO. Program the project. Connect the EDBG usb to pc and use a terminal monitor like teraterm for debugging

bbpatil / wireless-sensor-network Goto Github PK

wireless-sensor-network's Introduction

Microchip Wireless Sensor Network

Features

Overview

Technologies used

Web page Front End

Data endpoint API

Server hosting

Cloud IoT core

End point

Block diagram

Cloud

AWS

AWS EC2

TTN

Server

Flask data application

Node location dictionary

Data logging

MQTT subscriber

AWS IoT MQTT client

TTN IoT MQQTT client

HTML website

End nodes

Wi-Fi

Demo summary

Hardware used:

Firmware update

Software requirements

Steps to get up and running

Provisioning ECC608 device and WINC1500 to your AWS account

Programming SAML21 to connect and publish to AWS IoT

AP configuration

Node name

sleep code and duration

MQTT client ID

Running the code

LoRa

Decoder Function:

# Registration Links

MiWi

wireless-sensor-network's People

Contributors

Watchers

Recommend Projects

Recommend Topics

Recommend Org