Racer-3LA is a look alike version of the DRL Racer 3. Hence the name, Racer 3LA (Look Alike).

To build a proper replica you should use the following components: Battery - Pulse 70C 5S (18.5V) 1,800mAh Flight Controller - F3 with Betaflight 3 Motors - Tornado T2 1800KV Propellers - HQProp DP 6x4x3B

We recommend changing out the flight controller for a F4 with smart audio and change out the ESC's with a 4in1 combo board to save space and weight.

Dont forget about the Most important part... LEDs!

Image (Coming soon) File Path (Coming soon) Arm LEDs

Image (Coming soon) File Path (Coming soon) Body LED

The following parts can be 3d printed on most mid range 3D printers. We used a Cr-10 and an Ender 3 to create the test prints

Image (Coming soon) File Path (Coming Soon) PC (Polycarbonate) Top Cover

Image (Coming soon) File Path (Coming Soon) TPU (Thermoplastic Polyurethane) We Recomend SainSmart: https://www.amazon.com/gp/product/B00TI3JUTM/ref=ox_sc_saved_title_5?smid=ATVPDKIKX0DER&psc=1 Camera Mount

Image (Coming soon) File Path (Coming soon) PC (Polycarbonate) Top Cover

Image (Coming soon) File Path (Coming soon) PC (Polycarbonate) We recommend getting this printed with a SLA printer. A head-on colision with the camera will damage the camera either way so the material here does not matter. Lens Cover

The following should be cut from 4mm twill carbonfiber.

Image (Coming soon) File Path (Coming soon) Frame

Complete the Documentation Process Test cheaper molding methods for rapid replacment parts. Build 2nd Prototype with LEDs