bert-tec / xbot_display Goto Github PK

Hi,

You wrote: "Then connect Arduino/ESP(you need a power converter from 5V to 3.3V for ESP) and Display to power and ground.
Then connect serial line to RX pin of Arduino/ESP and using a resistor (for best work a diode) to TX."

So I connect the RX directly to the TR bus, but it's not clear to me how is the wiring to the TX of the Arduino.

Tnx.

I think Wire.begin(0,2) in xbot_display has to be changed. The documentation for Wire.begin says that the argument must be emtpy, or an address.

Tried with a few different boards (generic esp8266, pro-mini) , but it always came up with a similar issue. Everything is freshly installed.

In file included from C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/Adafruit_CircuitPlayground.h:3:0, from sketch\xbot_display_show.h:2, from C:\Users\jorda\Downloads\xbot_display-master\xbot_display\xbot_display.ino:1: C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/Adafruit_Circuit_Playground.h:114:3: error: 'Adafruit_CPlay_FreeTouch' does not name a type Adafruit_CPlay_FreeTouch cap[7]; ///< the array of capacitive touch sensors ^ In file included from C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/Adafruit_CircuitPlayground.h:3:0, from sketch\xbot_display_show.h:2, from sketch\xbot_display_show.cpp:1: C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/Adafruit_Circuit_Playground.h:114:3: error: 'Adafruit_CPlay_FreeTouch' does not name a type Adafruit_CPlay_FreeTouch cap[7]; ///< the array of capacitive touch sensors ^ exit status 1 Error compiling for board Generic ESP8266 Module.

Hallo,
erstmal finde ich es ein super Projekt .
Ich habe jetzt versucht ein ESP01 zu Flashen und ein Oled Display zu verbinden. Leider zeigt es nichts an. Bin wie in der Beschreibung vorgegangen. Auch den Widerstand habe ich eingelötet. Kann ich auch ohne Anschluss an den Scooter testen ob es funktioniert?

Gruß
Ulf