bezmi / orthrus Goto Github PK

CONTENT WARNING: copious amounts of rosin in pics below
First of all, thanks for making this keyboard available. It's been an amazing, albeit very long journey getting all parts and fitting everything together.

However I got stuck trying to program the keyboard PCBs. Whenever I try to connect my ST-Link V2 to the header, it just shuts off as if it had come across a short or something.

Now I have practically no knowledge of electronics, but I have tested for shorts between all the header pins and there isn't one. I then tried to test for continuity between header ground and Yj-14015 module ground, I got some voltage drop, but still continuity. I suspect the voltage drop is due to the transistor and is normal.

Speaking of, you moved the FET slightly as opposed to Mitosis, which raises my doubts about whether I soldered it on the right side. Could you check my photos? Could you please also check for anything I might've missed that could cause my programmer to freak out?

All photos are of the to-be right half of the keyboard:

For right angle headers I instead used straight headers and connected them via a solder bridge

Hi dear,
The overall concept and layout of the keyboard is fascinating.
Do you have plan for selling the product, personally or publicly?

Have a good day

Hi there! This is an amazing project! I am considering making a kit of this keyboard. Would you consider applying the GNU General Public License v3.0 to it? It is the lisence of the original metosis keyboard...
https://github.com/reversebias/mitosis-hardware/blob/master/LICENSE