bgarate / mw-wingui Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/mw-wingui
Automatically exported from code.google.com/p/mw-wingui
Please describe the requested feature and it's importance
What are the four DBG boxes for and how could you use them?
Original issue reported on code.google.com by [email protected]
on 28 Mar 2013 at 2:07
*What steps will reproduce the problem?
missing check boxes @RC control settings tab
*What is the expected output? What do you see instead?
please check the screenshot
*What version of the product are you using? On what operating system?
MultiWii 1.04--> 1.0.4438.40983
win7 ultimate 64bit
*Please provide any additional information below.
i could not install .NET framework 2.0 because it is not supported by 64bit
operating system.
thank for your effort on this application multiwiiconf versions is not working
by my computer goes gray after 1min(max) ..
this software is a gem for me i hope you go on to develop this app
Original issue reported on code.google.com by [email protected]
on 14 Mar 2012 at 6:13
Attachments:
The Label-fields at the PID-Settings for
I and D are to small. The letters are cut.
I'm using a netbook with 1024*600 resolution
and WinXP SP3.
Original issue reported on code.google.com by [email protected]
on 18 Nov 2013 at 10:36
East and West is swappen in the heading indicator
Original issue reported on code.google.com by [email protected]
on 24 Feb 2012 at 4:21
Tricopter front left and right moto indicators are swapped in the GUI
Will fix in next release
Original issue reported on code.google.com by [email protected]
on 22 Feb 2012 at 8:40
What steps will reproduce the problem?
1. Start WinGui and connect. Does not read parameters. Disconnect.
2. Start WinGui again and connect. Parameters are read and all is ok.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
WinGui version is 2.1. Operating system is Windows 7 64 bit.
Please provide any additional information below.
There are no errors associated with the problem.
Original issue reported on code.google.com by [email protected]
on 27 Mar 2013 at 9:40
FC SW version setting is burried at the GUI Settings tab. The selected FC
version must be displayed at startup (on splash screen) and on the "Comm error"
messagebox.
Original issue reported on code.google.com by [email protected]
on 13 Feb 2012 at 8:53
Running the latest MW-WinGUI 2.1 under Win7 x64 with a Bluetooth module
connected to the FTDI port of the Paris MW controller (@115200), the CPU usage
shoots up to between 50-70% as soon as I connect to the BT serial port.
Communication is working however some loops/threads in your code are consuming
so much CPU that the interface is almost unusable. If I pause the graph I am
able to navigate around OK, however I never see the CPU go below 50% when
connected. As soon as I disconnect it goes back to zero CPU. Not sure if this
is specific to just the BT connection method?
Original issue reported on code.google.com by [email protected]
on 23 Nov 2012 at 7:13
To give more clarity on setups and supported FC version, it could be wise to
add a setup wizard which is fired when not gui_options.xml file is exists, and
provide the downloadables without it. So everyone has to go through the initial
setup at the first start.
Original issue reported on code.google.com by [email protected]
on 14 Feb 2012 at 2:33
What steps will reproduce the problem?
1.when starting wizard screen appears and freezes
2.
3.
What is the expected output? What do you see instead?
run wingui 2.1
What version of the product are you using? On what operating system?
mw-wingui 2.1 on windows XP
Please provide any additional information below.
I have read/ and copy and pasted the guisettings from your blog but can't find
the proper way/place to put it.
This gui works fine on my windows 7 operating sys at work!
Original issue reported on code.google.com by [email protected]
on 26 Jan 2013 at 1:36
What steps will reproduce the problem?
1.run win gui and connect
2.Save file or load file
3. Takes a long time to do this
What is the expected output? What do you see instead?
Takes a long time to do this. If I pause the graph, the operation behaves as
expected in a normal time frame.
What version of the product are you using? On what operating system?
I am using WinGui 2.2 and OS is Windows 7.
Please provide any additional information below.
Perhaps you could pause the graph during the load and save operations. Or at
least put up a message to pause the graph during those operations.
Original issue reported on code.google.com by [email protected]
on 29 Apr 2013 at 11:42
My Level_I is 0.032, WinGUI shows 0.32 (factor 10).
It's an old bug since WinGUI 2.2
Original issue reported on code.google.com by [email protected]
on 18 Nov 2013 at 12:43
MultiWii 2.1 Win GUI is not working where as MultiWiiConf_2_0 is working well.
Please refer the video which is self explanatory;
http://www.youtube.com/watch?v=NfaV46u0BY4
Original issue reported on code.google.com by [email protected]
on 15 Aug 2012 at 4:35
What steps will reproduce the problem?
3. Start MultiWiiGUI
4. Try to connect "COM1 115200"
5. Get this error message (on "Parameters" and "RC Control Settings")
What is the expected output? What do you see instead?
see attach
What version of the product are you using? On what operating system?
OS: Windows 7x64 Professional
Firmware: MultiWii v2.0
Software: MulitiWiiGUI v1.04
Please provide any additional information below.
"Realtime Data" works fine.
Original issue reported on code.google.com by [email protected]
on 17 Jul 2013 at 1:19
Attachments:
Accelerometer and gyroscope work fine, but there are no tracks for
magnetometer, altitude and heading.
Original issue reported on code.google.com by [email protected]
on 8 Dec 2013 at 9:42
voltage monitoring after programing show an invalid number fix in 25.5 volt for
12.4 source voltage.
it happens after loading PID and setting file in wingui
Original issue reported on code.google.com by [email protected]
on 21 Nov 2013 at 10:30
What steps will reproduce the problem?
1. Is a new installation on Windows Vista machine. WINGUI for 2.0 works
perfectly on this machine.
2. Just look through tabs
3. Opened "Map" tab... serious error message (see below) but application
carried on running.
What is the expected output? ==> Worked beautifully on XP machine. Very cool.
Expected to see nice maps.
What do you see instead? ==> Error message, something about generic GDI+ error.
Red cross across graphics part of screen. Error message contents follow.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Runtime.InteropServices.ExternalException (0x80004005): A generic error
occurred in GDI+.
at System.Drawing.Graphics.CheckErrorStatus(Int32 status)
at System.Drawing.Graphics.DrawImage(Image image, Int32 x, Int32 y, Int32 width, Int32 height)
at GMap.NET.WindowsForms.GMapControl.DrawMapGDIplus(Graphics g)
at GMap.NET.WindowsForms.GMapControl.OnPaint(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
at System.Windows.Forms.Control.WmPaint(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.269 (RTMGDR.030319-2600)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
MultiWiiWinGUI
Assembly Version: 1.0.4579.34500
Win32 Version: 1.0.*
CodeBase: file:///C:/P/Mw-WinGUI-2.1/MultiWiiWinGUI.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.278 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.282 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.269 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
GMap.NET.Core
Assembly Version: 1.6.0.0
Win32 Version: 1.6.0.0
CodeBase: file:///C:/P/Mw-WinGUI-2.1/GMap.NET.Core.DLL
----------------------------------------
GMap.NET.WindowsForms
Assembly Version: 1.6.0.0
Win32 Version: 1.6.0.0
CodeBase: file:///C:/P/Mw-WinGUI-2.1/GMap.NET.WindowsForms.DLL
----------------------------------------
ZedGraph
Assembly Version: 5.1.2.878
Win32 Version: 5.1.2.878
CodeBase: file:///C:/P/Mw-WinGUI-2.1/ZedGraph.DLL
----------------------------------------
AForge.Controls
Assembly Version: 2.2.3.0
Win32 Version: 2.2.3.0
CodeBase: file:///C:/P/Mw-WinGUI-2.1/AForge.Controls.DLL
----------------------------------------
AForge.Video
Assembly Version: 2.2.3.0
Win32 Version: 2.2.3.0
CodeBase: file:///C:/P/Mw-WinGUI-2.1/AForge.Video.DLL
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.233 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data.SQLite
Assembly Version: 1.0.74.0
Win32 Version: 1.0.74.0
CodeBase: file:///C:/Users/Steve/AppData/Local/GMap.NET/DllCache/SQLite_v74_NET4_x86/System.Data.SQLite.DLL
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.237 (RTMGDR.030319-2300)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.233 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.Web.Services
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Web.Services/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
----------------------------------------
System.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
AForge.Video.DirectShow
Assembly Version: 2.2.3.0
Win32 Version: 2.2.3.0
CodeBase: file:///C:/P/Mw-WinGUI-2.1/AForge.Video.DirectShow.DLL
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
What version of the product are you using? On what operating system?
1.0.4579.34500 . Vista Home Premium -- latest updates.
Please provide any additional information below.
Tried reinstalling windows software mentioned in GoogleCode. Did repairs but
not necessary to reinstall .Net 2.0 (part of op system if I remember the
message). Thanks.
Original issue reported on code.google.com by [email protected]
on 17 Sep 2012 at 3:57
Hey, im using ure GUI in the Field on my Laptop with wireless connection to the
Copter, but i cant see all, because i cant fullscreening the GUI. So i hope u
can change that in the next Version.
Original issue reported on code.google.com by [email protected]
on 12 Mar 2012 at 8:48
You use "mm" for the month AND for the minute. but "mm" is minute, not month so
it display somthing like:
mwguilog-12mm10-05mm.log
code:
wLogStream = new StreamWriter(gui_settings.sLogFolder + "\\mwguilog" +
String.Format("-{0:yymmdd-hhmm}.log", DateTime.Now));
I think it should be MM for month or something like that.
Original issue reported on code.google.com by acemtp
on 13 Aug 2012 at 11:15
What steps will reproduce the problem?
1.|Set up normal bluetooth connection input passcode and prepare to connect
2.Check the bluetooth com port and that it is set to 115000 connect speed
3.Press conect, bluetooth module connects lights go solid on BT but no data is
transferred
What is the expected output? What do you see instead? |Connection times out
What version of the product are you using? On what operating system? win7 usin
2.2 GUI
Please provide any additional information below.
If you disconnect and close GUI 2.2 then reload Gui 2.1, press connect using
same com port, the connection is immediately made. Hence my belief there is a
problem using BT on gui ver 2.2
Original issue reported on code.google.com by [email protected]
on 22 Apr 2013 at 6:12
Dear Andras,
I would like to see your tool in my language ;) (German)
I know mutlingulation is a lot off work!
I have the same problems in my codes. If you want, I can give you same code to
safe time and have the chance, that users do the translation for you!
Please give me a note.
cu
Carsten
(info at klick-punkte.info)
Original issue reported on code.google.com by [email protected]
on 16 Jul 2012 at 8:37
I'm currently on Windows7 x64 , WinGUI 2.3pre7 (b4)
with Multiwii 2.3
What steps will reproduce the problem?
1.open WinGUI
2.click Connect
after that error screen appear look like in attachment file
here is debug detail
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Value of '0' is not valid for 'Value'.
'Value' should be between 'Minimum' and 'Maximum'.
Parameter name: Value
at System.Windows.Forms.NumericUpDown.set_Value(Decimal value)
at MultiWiiWinGUI.mainGUI.update_gui() in z:\VS-projects\mw-wingui\MultiWiiWinGUI\mainGUI.cs:line 2055
at MultiWiiWinGUI.mainGUI.b_connect_Click(Object sender, EventArgs e) in z:\VS-projects\mw-wingui\MultiWiiWinGUI\communication.cs:line 220
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripButton.OnClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
MultiWiiWinGUI
Assembly Version: 2.3.5105.40820
Win32 Version: 2.3.0.0
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/MultiWiiWinGUI.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1002 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
GMap.NET.Core
Assembly Version: 1.7.0.0
Win32 Version: 1.7
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/GMap.NET.Core.DLL
----------------------------------------
GMap.NET.WindowsForms
Assembly Version: 1.7.0.0
Win32 Version: 1.7
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/GMap.NET.WindowsForms.DLL
----------------------------------------
ZedGraph
Assembly Version: 5.1.2.878
Win32 Version: 5.1.2.878
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/ZedGraph.DLL
----------------------------------------
AForge.Controls
Assembly Version: 2.2.3.0
Win32 Version: 2.2.3.0
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/AForge.Controls.DLL
----------------------------------------
AForge.Video
Assembly Version: 2.2.3.0
Win32 Version: 2.2.3.0
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/AForge.Video.DLL
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data.SQLite
Assembly Version: 1.0.84.0
Win32 Version: 1.0.84.0
CodeBase: file:///C:/Users/Vivo/AppData/Local/GMap.NET/DllCache/SQLite_v84_NET4_x86/System.Data.SQLite.DLL
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
AForge.Video.DirectShow
Assembly Version: 2.2.3.0
Win32 Version: 2.2.3.0
CodeBase: file:///C:/Users/Vivo/Dropbox/WORK/Work/multi_rotor/WinGUI_2.3pre7(b4)-xmas/Release/AForge.Video.DirectShow.DLL
----------------------------------------
System.Speech
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Speech/v4.0_4.0.0.0__31bf3856ad364e35/System.Speech.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.EnterpriseServices
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
PS.sorry for my bag english
Original issue reported on code.google.com by [email protected]
on 28 Dec 2013 at 3:42
Attachments:
LogBrowser's openfile dialog's initial directory does not opens at the selected
log folder.
Cause:
InitialDirectory is not set for OpenFileDialog
Will fix in next release.
Original issue reported on code.google.com by [email protected]
on 22 Feb 2012 at 8:43
When using 2.2 Gui on MultiWii 2.3 the motors drop to 0 on arm and a few other
things no longer sync properly
Original issue reported on code.google.com by [email protected]
on 15 Nov 2013 at 7:52
What steps will reproduce the problem?
1.see below...
2.note that I am running modified 1.9
3.
What is the expected output? What do you see instead?
Instead of connecting... I get this message:
"Incoming data packet size does not match with expected packet structure.
It seems version setting in GUI does not match with FC software version."
What version of the product are you using? On what operating system?
Latest release running on Windows 7.
Please provide any additional information below.
The standard MWC GUI works fine on all my Multiwii multicopters.. but Win GUI
gives the error above.
Original issue reported on code.google.com by [email protected]
on 19 Apr 2012 at 7:22
Clicking on the save to file button gives an exception.
Original issue reported on code.google.com by [email protected]
on 6 Dec 2013 at 12:09
What steps will reproduce the problem?
1. Connect to Quadrino
2. Wait for GPS fix
3. See incorrect altitude
What is the expected output? What do you see instead?
An altitude a lot higher than I expect. Have uploaded example kml file. During
that log, I wouldn't of flown much higher than 50 metres. And the starting
altitude would've been at ground level.
What version of the product are you using? On what operating system?
Version 2.1. Windows 7 64bit
Original issue reported on code.google.com by [email protected]
on 9 Jan 2013 at 12:05
Attachments:
Similar to http://code.google.com/p/eepe/ project for Er9x.
Would help in case there are no free serial port for GUI.
Original issue reported on code.google.com by [email protected]
on 17 Feb 2012 at 8:36
What steps will reproduce the problem?
1. Connect model
2. Open MW Gui & connect
3. Disconnect model
What is the expected output? What do you see instead?
-Expect note saying that model has been disconnected, and graceful recovery.
-Currently see error
What version of the product are you using? On what operating system?
-Basic connectivity feature on Win7 X65
Please provide any additional information below.
-Please see screenshot attached
Original issue reported on code.google.com by [email protected]
on 22 Dec 2013 at 12:28
Attachments:
When reading the settings from the copter an
unhandeled exception appears (Value out of Range,
must be between maximum and minimum. The value causing
this error is -252).
There is no parameter with a -252 value in my config
Original issue reported on code.google.com by [email protected]
on 18 Nov 2013 at 12:42
I think its better to rescan ports each time the serial GUI page is entered, so
I did that. Also should change DropDownType to DropDownList for serial and
speeds, I think.
Original issue reported on code.google.com by [email protected]
on 17 Feb 2012 at 12:57
Attachments:
in reading the PIDs and AUX configuration setting the program hanged and show a
massage to re read the data and when doing this wingui goes out (Not
responding)
Original issue reported on code.google.com by [email protected]
on 21 Nov 2013 at 10:39
What steps will reproduce the problem?
1.Start Wingui in Windows 7. Two different machines, same results.
2.
3.
What is the expected output? What do you see instead? See attachment
What version of the product are you using? On what operating system?
See above.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 27 Dec 2013 at 7:37
Attachments:
What steps will reproduce the problem?
1.Use 64 bit OS - Multiwii V2.2
2.Does not open the 64 bit version but the 32 bit version opens
3.Even in 32 bit version when I choose the COM port the window hangs.
What is the expected output? What do you see instead?
In the 32 bit version ,when I select the COM port the data should be shown on
GUI
What version of the product are you using? On what operating system?
V2.2 with Nanowii v01
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Jun 2013 at 3:26
it gives an error
Original issue reported on code.google.com by [email protected]
on 21 Nov 2013 at 8:01
Why not for linux also? I don't agree with your reasons for not making it cross
platform. There is GTK and QT and they all work in linux/mac/windows, that
instead of using this windows .net "stuff". Also inside of QT you can use
opengl for accelerated graphics if necessary. No excuse.
Original issue reported on code.google.com by [email protected]
on 18 Mar 2012 at 6:42
Create class to read data from serial port and just read compass, yaw and roll
that can be reused in other projects.
Original issue reported on code.google.com by [email protected]
on 11 May 2013 at 4:19
Please describe the requested feature and it's importance
Please describe how to use the DBG1-4 boxes in the gui.
They might be useful in troubleshooting problems.
Original issue reported on code.google.com by [email protected]
on 1 Apr 2013 at 1:16
What steps will reproduce the problem?
1.change pid setting
2.save the setting to a file
3.load a saved file and want to write
What is the expected output? What do you see instead?
it should show 12.5 but appear 25.5 fixed number 25.5
What version of the product are you using? On what operating system?
multiwii v2.3 - and Windows XP SP3
Please provide any additional information below.
some time when you want to read or write the setting an error appear to re read
and when doing this the not responding massage appear and computer hanged.
Original issue reported on code.google.com by [email protected]
on 23 Nov 2013 at 7:35
1. String Format ERROR
cause by: Format error
File: MWGUIControls\heading_indicator.cs(87)
solution:
更正為 "{0:000°}"
2. 無法載入檔案或組件 'AForge.Video.FFMPEG .....
System.BadImageFormatException
Could not load file or assembly 'AForge.Video.FFMPEG, Version=2.2.3.0,
Culture=neutral, PublicKeyToken=03563089b1be05dd' or one of its dependencies.
An attempt was made to load a program with an incorrect format.
cause by: 該AForge版本不支援x64核心
reference: http://www.aforgenet.com/forum/viewtopic.php?f=2&t=2526
solution:
第一種: Building target from 'Any CPU' to 'x86'
第二種: Corresponding x64 library& *.dll
3. realtime tab didn't update
cause by: some sentence lose update to enum-type
File: mainGUI.cs (1782)
處理方法:
private void update_gui()
{
...
// TAB realtime
if (tabMain.SelectedIndex == 2) // original(wrong)
if (tabMain.SelectedIndex == GUIPages.Realtime) // after correction
...
}
What version of the product are you using? On what operating system?
R53/win7 x64
Please provide any additional information below.
Cheers
Original issue reported on code.google.com by [email protected]
on 29 Oct 2013 at 11:35
Way Point implementation - 1 : Get Waypoint Function in WinGUI (R53)
based on multiwii 2.2, the protocol was implemented in "Serial.ino", in
\ case MSP_WP:
\ ...
\ if (wp_no == 0) {...}
\ else if (wp_no == 16) {...}
\ serialize8(wp_no);
\ serialize32(lat);
\ serialize32(lon);
\ serialize32(AltHold); //altitude (cm)
\ serialize16(0); //heading will come here (deg)
\ serialize16(0); //time to stay (ms) will come here
\ serialize8(0); //nav flag will come here
\ }
\ break;
=====================================================
There was some statement to send current waypoints in flight controller
But in WinGUI R53, there’s to corresponding function to download
corresponding waypoint.
It’s existing
\ private void MSPquery(int command) {...}
to get a waypoint, but what if we want to download the waypoint-to-go from
flight controller?
Here’s solution:
In WinGUI R53, mainGUI.cs(line 1441), there’s some statement to get current
waypoint:
\ private void evaluate_command(byte cmd)
\ {
\ …
\ switch (cmd)
\ {
\ …
\ case MSP.MSP_WP: // (1441)
\ ptr = 0;
\ byte wp_no = (byte)inBuf[ptr++];
\ if (wp_no == 0) {…}
\ if (wp_no == 16) {…}
\ break;
Just add codes before the “break”, as below
// ===============================================================
// MSPgetWP WP#1~WP#15 in WinGUI based on WinGUI R53, date: 2013/11/14
if ( wp_no >= 1 && wp_no <= 15 ){
//Clean up current mission list
if (wp_no == 1)
{
missionDataGrid.Rows.Clear();
updateIndex();
updateMap();
}
Int32 lat32 = 0, lon32 = 0, alt32 = 0;
double lat = 0, lon = 0;
int alt = 0, time2stay= 0;
byte nav_flag = 0;
lat32 = BitConverter.ToInt32(inBuf, ptr); ptr += 4;
lon32 = BitConverter.ToInt32(inBuf, ptr); ptr += 4;
alt32 = BitConverter.ToInt32(inBuf, ptr); ptr += 4;
BitConverter.ToInt16(inBuf, ptr); ptr += 2; // for heading, not use now
time2stay = BitConverter.ToInt16(inBuf, ptr); ptr += 2; // time2stay
nav_flag = (byte)inBuf[ptr]; // nav-flag
lat = (double)lat32/(double)10000000;
lon = (double)lon32 / (double)10000000;
alt = alt32;
addWP("WAYPOINT", time2stay, lat, lon, alt);
}
// MSPgetWP WP#1~WP#15 END
// ===============================================================
then, you can download the waypoints in the flight-controller!
(Of course, some implementation is needed to add in on-board multiwii,
I will add it later)
Original issue reported on code.google.com by [email protected]
on 14 Nov 2013 at 3:53
What steps will reproduce the problem?
1. connect via bluetooth
2. disable the copter while connected
3. WinGUI crashes and only taskmanager will help
What is the expected output? What do you see instead?
a) Error message that connection is broken.
b) app hangs
What version of the product are you using? On what operating system?
MWii 2.3, MWii2.3pre3 WinGUI, WinXP SP3
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 21 Nov 2013 at 6:44
Please describe the requested feature and it's importance
i think graph readablity is a little bit poor side
to improve the situation my suggestions are
1-user selectible graph line colours and line width
2-user selectible graphbackground colour or type can be applied please see the
attachment i put as an example
Original issue reported on code.google.com by [email protected]
on 15 Mar 2012 at 11:55
Attachments:
based on multiwii 2.2, the protocol was implemented in "Serial.ino", in
\ case MSP_SET_WP:
\ ...
\ if (wp_no == 0) {...}
\ else if (wp_no == 16) {...}
\ ...
\ break;
is a statement judging that wp_no is 0(HOME) or 16(HOLD)
but in WinGUI R53, there's no corresponding function to upload a way-point
packet except
\ private void MSPquery(int command) {...}
and
\ private void MSPqueryWP(int wp) {...}
so I used these two function to write a new function
for uploading the way-point packet, as below
// ===============================================================
// MSPsetWP based on WinGUI R53, date: 2013/11/7
private void MSPsetWP(int wp_no, Int32 lat, Int32 lon, Int32 alt, Int16
heading, Int16 tts, byte flag)
{
byte c = 0;
byte[] o;
o = new byte[25];
// with checksum
o[0] = (byte)'$';
o[1] = (byte)'M';
o[2] = (byte)'<';
o[3] = (byte)18; c ^= o[3]; //one byte payload
o[4] = (byte)MSP.MSP_SET_WP; c ^= o[4];
o[5] = (byte)wp_no; c ^= o[5]; // way point number
o[6] = (byte)( lat & 0xff); c ^= o[6]; // latitude
o[7] = (byte)( (lat>>8) & 0xff); c ^= o[7];
o[8] = (byte)( (lat>>16) & 0xff); c ^= o[8];
o[9] = (byte)( (lat>>24) & 0xff); c ^= o[9];
o[10] = (byte)( lon & 0xff); c ^= o[10]; // longitude
o[11] = (byte)( (lon>>8) & 0xff); c ^= o[11];
o[12] = (byte)( (lon>>16) & 0xff); c ^= o[12];
o[13] = (byte)( (lon>>24) & 0xff); c ^= o[13];
o[14] = (byte)( alt & 0xff); c ^= o[14]; // altitude
o[15] = (byte)( (alt>>8) & 0xff); c ^= o[15];
o[16] = (byte)( (alt>>16) & 0xff); c ^= o[16];
o[17] = (byte)( (alt>>24) & 0xff); c ^= o[17];
// heading/time_to_stay/flag is future function
// so it doesn't work now
heading = tts = flag = 0;
o[18] = (byte)( heading & 0xff); c ^= o[18];
o[19] = (byte)( (heading>>8)& 0xff); c ^= o[19];
o[20] = (byte)( tts & 0xff); c ^= o[20]; // time to stay
o[21] = (byte)( (tts>>8) & 0xff); c ^= o[21];
o[22] = (byte)flag; c ^= o[22]; // flag
o[23] = (byte)c;
serialPort.Write(o, 0, 24);
}
// MSPsetWP END
// ===============================================================
if the author EOSbandi agree, it's welcome for everyone to use this code
the receive part in on-board multiwii will also release after I made it
reference:
http://multicopter-make.seesaa.net/article/360526447.html
Original issue reported on code.google.com by [email protected]
on 7 Nov 2013 at 5:48
What steps will reproduce the problem?
1. Flash the multiwii board (MultiWii SE 2.0 Board)
2. Fly the copter
3. Leave overnight
4. Connect FTDI and USB and GUI won't communicate, BUT the arduino IDE can
connect and upload fine and you can fly the copter as normal.
When you try to connect you get the error in the image. When you open arduino
IDE and re-flash it then works fine again. Tried different FTDI and leads etc,
but like I said any other serial comm program can communicate with board.
What version of the product are you using? On what operating system?
Version 2.1 and 2.2 both same on Win XP Pro
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Apr 2013 at 9:22
Attachments:
What steps will reproduce the problem?
1.double click to MultiWiiWinGUI.exe
What is the expected output? What do you see instead?
program is stuck on "initializing.."
for a long time memory used is changing very slowly (from 21.236K
i could not wait until it start .. waited more than 5 minutes
What version of the product are you using? On what operating system?
multiwii wingui 2.1(1.0.4579.34500)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 30 Jul 2012 at 3:54
a tab where we can edit thing like cam centering rc min max etc... it boring
to when you need to make change you need to upload all from andurino ....
Original issue reported on code.google.com by [email protected]
on 21 Jun 2012 at 10:20
What steps will reproduce the problem?
1. Graphical display update is delayed as if the Refresh rate is stuck at 2 or
5hz
2.
3.
What is the expected output? What do you see instead?
Expected is faster when set at 20hz.
What version of the product are you using? On what operating system?
Please provide any additional information below.
Thanks
Original issue reported on code.google.com by [email protected]
on 5 Aug 2012 at 3:13
Please describe the requested feature and it's importance
I want to try to do some troubleshooting on a problem and I want to use the
debug dbg1-4 capability. Can you tell me what data type they are. Also if I
wanted to use them in a section of code that is looping will they store an
array?
Original issue reported on code.google.com by [email protected]
on 3 Apr 2013 at 4:51
What steps will reproduce the problem?
1.Happens every time I am connected
2.
3.
What is the expected output? What do you see instead?
the four vertical sliding graphs as the throttle is increased or decreased
What version of the product are you using? On what operating system?
mw-wingui 2.1 on Windows 7 64bit
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Aug 2012 at 11:53
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.