binary-ex-machina / binary.com-bot Goto Github PK

pls help me, i want to analyze last digit. ex : if last digit = 0 start count 5 tick, if result not 0 then signal as 1 ( i mean we only count when last digit = 0 ), so if signal > 10 than start buy Digit match. big thanks

Hello boss @binary-ex-machina ,can you please help me edit this BOT to pick just one trade per signal instead of 3 in a row as originally built and trade again when new signal forms after a while ? thanks in anticipation of your prompt response.

9-high-success.zip

hello ex machina, your work is quite extensive and of great help to the community, I have a problem with the CCI that you facilitated, because the reading of the calculation is quite different, if you could give me some advice to improve this, I would be grateful, another problem is that when my mobile averages are crossed they do not run if not until the next candle, they are not in array, if you could advise me at some time that you have, I would be grateful.

In advance very good work you do and your contributions are a great springboard to build our bots.

how can I reset to first bet if it reach target profit
ex I set target profit to 5 USD if it reach I do not need it to notify I need it to reset and run again.

Hi @binary-ex-machina

Please help me,

This is correct so?

I want to buy if a minute candle is closed and closed price is higher then EMA 50 and EMA 10,bot must check only close price and open position if closed price is good. Created few bots but with ticklist and I dont have experience with minute candle systems.

Thank you

hello can someone assist me, i want to convert my rise/fall strategy to a bot. here is my chart
please can it worked? i use ma 13, ma21 and ma50. my entry point are marked on my chart snapshot if you want to help, you can reach me here [email protected]

Hey it's me again :D I tested ur Labouchere MM and found a bug : the stake remained the same on every trades. I was sure I did nothing wrong so could u please give it a check :D
P/S : I implemented my own Labouchere source code already . This issue is for notify about the bug only :D

can you pls show me pictures of how to make both restart after $1 profit made...im having problem uploading the bot,so just use the default bot with digits over/under to build the bot..thanks in advance

can you set your labouchere to trade again(set all to first start) if l they get target profit
ex target profit = 1 list 0.2 0.2 0.2 0.2 0.2 if it get profit set it to target profit = 1 list 0.2 0.2 0.2 0.2 0.2 again

Hello @binary-ex-machina

Maybe you can help me with this bot:
Rise if current high is bigger than the lowest previous high + LWATR
Fall if current low is lower than the highest previous low - LWATR
LWATR = Linear weighted average true range. The period used for calculations is 7.
1 min trades.

Good Day Friend,
Please i want to know how load your indicators onto the bot page, i tried loading them like the other scripts but nothing comes up either in the functions tab or indicators tab.

Also, can you help develop a a Parabolic SAR indicator. I am using it manually to trade goes out , and it looks promising.
The strategy is , when a Parabolic SAR dot appears at the end of a 1 minute candle, trade is placed for 3 minutes and barrier is set to give a payout of 200%. Present barrier for vol 100 is set at +14.5, -14.5.
Thank you.

Hi @binary-ex-machina

Maybe you can help me with this. I dont want to make a trade when the market is trending og changing a lot in a short time. So I want to trade in a ranging market. Hope you understand :)

Hello Boss,

I am trying create this strategy below:

Market: Volatility 25 index
Timeframe: 2min

Binary Chart Setup
Indicators:Good support and resistance indicators(MACD,RSI,Bollinger band,ATR)
Candle TimeFrame: 2 Mins

Trading Rules
CALL Option (UP):

Price must start from the highest closing prices of the resistance level and close well above the region,indicating a breakout from the squeeze region.

The last candle in the region before the breakout must be green and the previous before that must be red.
TRADE
Buy CALL Option
Set expiration time: 2 Min

PUT Option (DOWN):

Price must start from the lowest closing prices of the support level and close well below the region,indicating a breakout from the squeeze region.

The last candle in the region before the breakout must be red and the previous before that must be green.
TRADE
Buy PUT Option
Set expiration time: 2Mins.

I'll be glad if YOU can help me set this up and pls put MARTINGALE and option to COMPOUND PROFITS.
I'LL SURELY DONATE TO UR GOOD COURSE IF I GET WHAT I WANT BOSS!
THANKS SIR

please help me build this ema strategy to a bot
if 25 EMA is above 50 EMA and both 25 and 50 EMA is Above 100 EMA do purchase rise on the next candle.
and If 25 EMA is below 50 EMA and both 25 and 50 EMA is below 100 EMA do purchase fall on the next candle. please add martingale thanks

Hi There,

I am looking to use the output of your chop analysis within an AND function to prevent my bot from trading during choppy conditions.

However, I can't work out how to get a usable output from your block to create such a rule. WOuld you be able to help me understand how it is working?

Many thanks!

Hey it's me again, but this time is a help-needed, not a bug found :D
Having hard time to find out what I'm doing wrong here. My idea is when I purchase Higher than it would be : Higher than (Entry + 1) ; and for Lower is : Lower than (Entry - 1).
However the bot is running like "random" (or if I have made mistake somewhere without realising ?) .
Also tried to put negative number in the barrier and had no success.
Any help would be appreciated :D

Hello. How to download your indicators? When I'm downloading in XML format I have, they do not open.

@binary-ex-machina
I tried to add the martin.xml.zip you provided for the Stop Loss Counter reset to one of your Bot, but I failed miserably. I tried to add it to your bot #5-redgreen.xml but if it loses once it resets right away. Can you help
binary-bot help Ex-Machina.zip

Thank you so much ! I love all your Bots

here is the bot to add martingale
armmar4711.Bot.zip

I have some strategy ideas and I need help creating bots

How to create stochastic 5,3,3 if over 80 trade fall if under 20 trade rise
I do not know how to put the period on your indicator

The following code is giving me a break even results . Basically it is a trend follow strategy. And I didnt code it to avoid lateral or choppy market. If someone point out a condition to insert a code to avoid lateral or choppy market it would perform better. I might insert 50 ema but any other suggestions

can you make a Fibonacci bot

please help me build this even odd bot. i want the bot to alternate this way,

1. even
2. odd
3. even
4. odd
   5.even
   6.odd like that, if loss 7 time in a roll stop and restart after 1 minute. please add martingale Thanks

please add martingale to this bot for me, the one added does not work
binary-bot_NEWEMA.zip

Hello friend! Is it possible to use your chop indicator with ticks not candles? When i try to put ticks list into getCHOP candles place i get error (

Hi @binary-ex-machina

If you have a little time,please check this bot. I used your bot and changed indicators, periods and now this new bot not open trades when two EMA crossing.
Bot work and open trades but not this time when is important and I not understand what is happend.

EMA Cross V2.zip

Thank you

Hi Master

I have a question:

Bot have a condition when must open a trade. (Example indicator crossing) BUT if result is LOSS don't wait to next signal. Must next trade instantly open and this must repeat as long as he win. If result is WIN then start from first condition

How to create this option?

Thanks

Is this possible with your Stochastic indicator?
Rise when %K crosses above %D
Fall when %K crosses bellow %D

It can happen anywhere and not import if it is in overbougt or oversold.

please help me build this even odd binary.com strategy.
the strategy goes like this. 1. if the last digit is 1 do purchase even 2. if the last is 0 do purchase odd, 3. if the last is 2 do purchase even, 4. if the last digit is 3 do purchase odd 5. if the last digit is 4 do purchase even, 6. if last is 5 do purchase odd, 7. if the last digit is 6 do purchase even, 8. if the last digit is 7 do purchase odd, 9. if the last digit is 8 do purchase even, 10. if the last digit is 9 do purchase odd. add martingale with martingale level set to 4. thanks

help me admin to write this strategy in binarybot with martingale
1.EVEN
2.EVEN
3.ODD
4.ODD
5.EVEN
6.EVEN
7.EVEN
8.ODD
9.ODD
10.ODD
11.EVEN
12.EVEN
13.EVEN
14.EVEN
15.ODD
16.ODD
17.ODD
18.ODD
19. Return as 1....
add martingale thanks

please build this simple moving average bot for me.
we will use simple moving average 20, 40, and 80 here is the strategy, if price is above the 3 simple moving average 20, 40, and 80 simple moving average purchase rise, if price is below 20,40 and 80 simple moving average purchase fall.

please do you have psar bot?
can you share?
thanks

please also help me with this new candle strategy
if the new or current candle is green do purchase rise. and if new or current candle is red do purchase fall.

At the moment I'm trying out your indicators. Great work, I really appreciate it.

But I found out that your stochastic indicator returns wrong values. I compared it with the stochastic indicator of trading view. Can you please look into it? I tested it with 1 minute candles and the inputs 14, 1, 3.

If you get it working correctly and I can use my stochastic strategy, I will probably leave a donation :)

Hi! Wanted to know how to install your indicators?

Hi!!! My question is how to make your stochastics transaction opened at the intersection of the D3 and K1

Hello ,

I need to make BOT for my magic Spot price analyzer strategies.
Please send e-mail to me : [email protected] if you are interesting.
Thanks you

can you teach me to an example for trailling stop ? thanks :)

Hello @binary-ex-machina,

Now, i've downloaded all your bots-block, and i've try all your bots.
Thank you for your created this bots.

I'd post my issues in binary-com/binary-bot#436, and
Fruitfella/ROBOT-binary#113 for help me build HMA indicator, but I did not get the good-solution.

This is formula of HMA in web:

This is formula in author (Alan Hull) website: https://alanhull.com/hull-moving-average :
(1) Hull Moving Average (HMA) formula
Integer(SquareRoot(Period)) WMA [2 x Integer(Period/2) WMA(Price) - Period WMA(Price)]

(2) MetaStock formula
period:=Input("period",1,200,20);
sqrtperiod:=Sqrt(period);
Mov(2*Mov(C,period/2,W) - Mov(C,period,W),LastValue(sqrtperiod),W);

(3) And, this is formula in script of tradingview:
HMA = WMA(2*WMA(n/2) − WMA(n)),sqrt(n))
with:
HMA = Hull Moving Average
WMA = Weighted Moving Average
N = Period
SQRT = Square Root

(4) And explain from fidelity.com (https://www.fidelity.com/learning-center/trading-investing/technical-analysis/technical-indicator-guide/hull-moving-average):
Calculate a Weighted Moving Average with period n / 2 and multiply it by 2
Calculate a Weighted Moving Average for period n and subtract if from step 1
Calculate a Weighted Moving Average with period sqrt(n) using the data from step 2
HMA= WMA(2*WMA(n/2) − WMA(n)),sqrt(n))

(5) Note:
On tradingview.binary.com also Hull MA indicator

And, I think you can write this bot completely.

Note: I use this HMA indicators in the trade TOUCH (only TOUCH)

Thank you very much.

Hello ex machina,, i try to purchase when chop indicator hit certain point but not working,
could you please edit this bot
Thanks
chop bot ex machina .txt

Hello friends, my bot takes time before it buys a contract, please i need someone to help me remove the wait time. i.e so as to begin to place trade as soon as i run the bot. Thanks to anyone that can help me solve this problem.
Please for the file contact me at [email protected] . I am having problem uploading the file here. Thanks

please help me to input block 4, if balance after - balance start > 20 bot stop, if balance after - balance start < -20 bot stop. because i want to operate more than one bot simultaneously.so based on balance all bot will be stop. tq :)

please add martingale strategy to touch long ema

Hi Machina, i'm trying to create a botg that apply martingale after a win just like Oscars martingale, but the problem is that oscars martingale does not martingale if you lose One Time. I need a bot that martingale after a win even if it loss 1 time.

stochastic stop working after "Cannot read property 'slice' of undefined".
i print out every tick test indicator. after the message show not result from indicator show.
i use KD both 5,3,3 and test another value same error.

Hey I've just tried your ATR Indicator and found a bug in it. The value calculation is right, but in Array mode it doesn't call the value of n(th) Candle ,instead it only show up the value of current candle (I called the 2th from end,3th from end,etc...). In these 2 images as you can see I called the 3th from end but it only calculate the current.
btw thanks a lot for your tools and bots. I love them a lot 👍

Hi Master :)

I want to ask you, what is wrong in my code?

My idea is:
1 or 5 minute candles!

If 3 candle is green and 4. candle is red then PUT
if 3 candle is red and 4. candle is green then CALL.

Count Candle.zip