A module to integrale informations from a Netatmo weather station into the MagicMirror.

Prerequisites

• requires MagicMirror v2.0.0
• a Netatmo weather station at home or at least access to a Netatmo weather station account

To use this module, clone this repository to your modules folder of your MagicMirror:

cd ~/MagicMirror/modules

git clone https://github.com/RaymondMolenaar/MMM-Netatmo.git MMM-Netatmo

Now just add the module to your config.js file (config entries).

To be able to access your data, you need to have an Netatmo Application and grant this application access to your data.

Your can register a new app here. Afterwards you will get an APP_ID and an APP_SECRET which you will need to enter in the config entries.

To allow the app to access your data, you need to send a POST request to the auth server and register the app.

One option is to use the command line tool cURL.

curl --data "grant_type=password&client_id=YOUR_CLIENT_ID&client_secret=YOUR_CLIENT_SECRET&username=YOUR_NETATMO_USERNAME&password=YOUR_NETATMO_PASSWORD&scope=read_station" "https://api.netatmo.com/oauth2/token"

The POST request will return the following data:

{"access_token":"abc","refresh_token":"xyz","scope":["read_station"],"expires_in":10800,"expire_in":10800}

The REFRESH_TOKEN will be needed in the config entries.

The module needs the default configuration block in your config.js to work.

{
	module: 'MMM-Netatmo',
	position: 'bottom_left', // the location where the module should be displayed
	header: 'Netatmo',
	config: {
		clientId: '', // your app id
		clientSecret: '', // your app secret
		refreshToken: '', // your generated refresh token
		
		location: "germany/berlin",  //for AirQuality
		updateIntervalAirQuality: 600, // in secondes = every 30 minutes
		updatesIntervalDisplay: 60, //refresh internal
		lastMessageThreshold: 600, // in seconds (10 minutes)
		horizontal: false,
		horizontalOverflow: false,
		windUnit: "KT", // Possible "KMH", "MPH", "MS", "BFT", "KT"
		displayWindInOutdoor: false,
		displayRainInOutdoor: false,
		showLastMessage: true,
		showDataIcon: true,
		showDataHeader: true,
		showModuleStatus: true,
		showModuleFirmware: true,
		refreshInterval: 3,
		moduleOrder: ["Indoor", "wind", "Kitchen", "Garden", "Rain" ],
	}
},

The following properties can be configured:

Initially I forked the original repository https://github.com/CFenner/MMM-Netatmo.git, and did some changes to it (like still being able to show all modules, even they not all were in reach). Then however I found out that AgP42, haywirecoder and QBseventy did an amazing job, and wanted to use that version. Since it is not possible to double fork or something, I put my original fork in a release https://github.com/RaymondMolenaar/MMM-Netatmo/tree/master/Releases/CFenner-Fork

The most important change of this fork, is that even when not all of your Netatmo Modules are in reach (due to empty batteries or whatever), this MM-Module will still display your module, but with empty values. It doesn't hang on the loading circle.

I also redesigned the way de data is displayed. The Icons don't change color depending on the status, but the little dot's do, similar to the Android-App. The Wind-speed unit can be configured in the config. If your system is set to Imperial units, it will show Temp in Fahrenheit and Rain in Inches/Hour.

In the MM-config:

var config = {
	units: "metric", // "imperial" for Fahrenheit
};

or in MMM-config

{
	module: 'MMM-Netatmo',
	position: 'bottom_left', // the location where the module should be displayed
	header: 'Netatmo',
	config: {
		units: "metric", // "imperial" for Fahrenheit
	}
},

Update 22-03-2020: Added Horizantal (row) View