brannondorsey / sniff-probes Goto Github PK

I have changed the localization and timezone to Australia where channel 12 and 13 are supported. However, when I tried to hop channel from 1 to channel 13, and ran the script, the result was always monitoring a fixed channel (normally channel 1), but not hopping between channels.

Though hop channels from 1 to 11 works fine for me.

Hello, im ussing a beaglebone black ,i have put an interface in monitor mode and the program has executed. i get the following error
bash: ./sniff-probes.sh: Permission denied

Im ussing sudo

This sniff-probes.sh relies on gawk, not awk. Update documentation and add a line to check for the presence of gawk in sniff-probes.sh.

hi, thanks for the great script.
I need little help for text processing.
I want to save the output into JSON format.
but I don't have good knowledge of awk.
please save the whole output in JSON.

pi@raspberrypi:~/sniff-probes $ sudo IFACE=wlan1 ./sniff-probes.sh
tcpdump: wlan1: SIOCGIWPRIV: Argument list too long

I've run into a slight problem... I get a bunch of errors while running this. Here's the log...

IFACE=wlan1mon ./sniff-probes.sh awk: parse-tcpdump.awk: line 2: syntax error at or near , awk: parse-tcpdump.awk: line 7: syntax error at or near , awk: parse-tcpdump.awk: line 13: syntax error at or near , tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on wlan1mon, link-type IEEE802_11_RADIO (802.11 plus radiotap header), capture size 256 bytes tcpdump: Unable to write output: Broken pipe

I'm using an Edimax EW-7811Un in monitor mode using updated drivers, but it will do the same thing with my Ralink RT5370 card on this Pi Zero W.

Any help?

Hopefully I am not missing something stupid here.

wlan1 IEEE 802.11b ESSID:"" Nickname:"<WIFI@REALTEK>" Mode:Monitor Frequency:2.412 GHz Access Point: Not-Associated Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Device is in Monitor mode.

pi@raspberrypi:~/sniff-probes $ sudo IFACE=wlan1 ./sniff-probes.sh tcpdump: wlan1: That device doesn't support monitor mode
Is my result. And I know the device support monitor mode, as I can run

sudo airodump-ng wlan1

and it is monitoring

` BSSID STATION PWR Rate Lost Frames Notes Probes

(not associated) 5C:AA:FD:E8:B7:51 -46 0 - 1 101 3 Sonos_nshh42
(not associated) 84:3A:4B:33:B7:A2 -68 0 - 1 0 3
(not associated) 00:13:25:B0:04:79 -75 0 - 1 172 5
(not associated) F4:30:B9:7A:7D:BE -80 0 - 1 0 2 STEPPING FOR
(not associated) F2:BD:F1:20:07:9C -82 0 - 1 0 1
(not associated) 50:76:AF:57:87:94 -83 0 - 1 0 1

Any thoughts?`

Thought I was typing in terminal.... this is embarrassing.

Hy...Is there any way to capture probe requests in windows in python without using wireshark or any other software?
Kindly help.