brunoklein99 / nikon-camera-control Goto Github PK

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.
ncc don't show if ISO auto is on. it could be great show that and it could be 
greatest to have a check box to enable or disable this option.


https://groups.google.com/d/topic/ncc-google-group/du97pssQ6R0/discussion

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

Possibility to set the shutter speed in manual mode to do exposure bracketing.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.
- a progress bar for downloading picture could be great

https://groups.google.com/d/topic/ncc-google-group/du97pssQ6R0/discussion

Running Windows 7 Ultimate x64. It'd be awesome to have Live View support for 
the D5000. I'm not sure how difficult this would be to pull off from a 
technical standpoint, but I know a lot of folks who shoot with them (including 
myself,) and it would be a handy feature to have.

What steps will reproduce the problem?
1. Install NCC application and pre-requisites
2. Launch application. 
3.

What is the expected output? What do you see instead?
Application startup. System error message, and request to send crash report to 
MS

What version of the product are you using? On what operating system?
0.6.43 and 0.6.69 under Win XP Sp3 and Win 7 Home Premium SP1 running under 
Virtualbox 4.1.12 on an OSX 10.6.8 host.

Please provide any additional information below.

Can capture logs/files/crash reports if needed.
And thank you for sharing your work.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1. open the log and go to 100% lv zoom ratio
2. quit the lv mode
3. re enter the lv mode

What is the expected output? What do you see instead?
The 100% lv zoom ratio is saved and set by default when re-entering the lv 
mode. We then expect the picture to be zoomed.

What version of the product are you using? On what operating system?
NCC - 0.7.209.0
Windows 7 family premium
nikon D5000

Please provide any additional information below.
Thank you very much for your work !!

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?
I want to see the live view on the computerscreen

What version of the product are you using? On what operating system?
D 90

Please provide any additional information below.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

It's possible tocontrol several cameras.
that will be great.

Regards

Isn't possible to set negative wb.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

Possibility to define tags and a windows where can be easily select one or mere 
tags. 

What steps will reproduce the problem?
1. Connect D70s
2. Create time lapse scenario in NCC (in this case 3 shots in 5 second 
intervals).
3. Click Start Time Lapse

What is the expected output? What do you see instead?

Expected a new picture to be automatically taken every 5 seconds.  NCC made the 
camera take the first shot.  Then the status line in NCC said the next shot 
would be taken in 4 seconds, but there were no further shots.

What version of the product are you using? On what operating system?

Using NCC 0.6.43 on a Windows 7 64 Bit OS.

Please provide any additional information below.

The image from the first time lapse photo downloaded to NCC as normal.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

Original thread:
https://groups.google.com/d/topic/ncc-google-group/tmzukMEu_A4/discussion

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

Support for multilingual interface 

Some camera support Bulb mode in MTP mode, like D800

What steps will reproduce the problem?
1. Install NCC v0.7.186
2. Connect D80
3. Take picture

What is the expected output? What do you see instead?
Instead of saving and displaying the file there is no response at all. If I try 
to take another action, it says "Camera is busy" or something like this.


What version of the product are you using? On what operating system?
NCC v0.7.186 and Vista.

Please provide any additional information below.
With v0.7.165 and the same setup it works fine.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

When doing liveview "focus "staking" sometimes it plants the liveview windows 
and a window with "unable to start liveview" appeared again. 

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

The live view button is disable when the D3X is connected

What steps will reproduce the problem?
Set the theme to WhistlerBlue

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

On startup the application should check if is available new version for 
download. 

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1. Click on LV
2. No Image Nor Control
3.

What is the expected output? What do you see instead?
Live View does not work for a Nikon D300, I have not yet tried any other camera.

What version of the product are you using? On what operating system?
0.6.90.0

Please provide any additional information below.

All other functions seem to work well.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

http://nccsoftware.blogspot.com/2012/08/beta-release-07186.html?showComment=1345
367215019#c8630624045441561151

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

https://groups.google.com/d/msg/ncc-google-group/-/yFQdGuRQobAJ

What steps will reproduce the problem?
1. Take a shot using NCC.
2. Photo downloads to NCC.
3. Try to delete the photo from NCC using either a right-click on the mouse or 
the Delete key.

What is the expected output? What do you see instead?

The photo doesn't delete and I haven't been able to locate the folder in which 
they are being stored (so that I can delete them at the O/S level).

What version of the product are you using? On what operating system?

Using NCC 0.6.43 on Windows 7 64 Bit OS.

Please provide any additional information below.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.The SDRam checked  
2. Capture
3. The second capture generate error 

What is the expected output? What do you see instead?
No picture transferred, Device busy error generated  

Please use labels and text to provide additional information.

https://groups.google.com/d/topic/ncc-google-group/dhih1frLktQ/discussion

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.
- It could be great to have an option to have your application always on top 
(went you use it with an other viewer)

https://groups.google.com/d/topic/ncc-google-group/du97pssQ6R0/discussion

What steps will reproduce the problem?
1. In live view, the application hang
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

The application automatically detect when a camera is connected, may happen in 
this time the camera is busy, so connection isn't possible.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

http://code.google.com/p/wpf-animation/source/browse/trunk/src/WPF/Animation/Pen
nerDoubleAnimation.cs
http://www.pixiq.com/article/eased-timelapse-videos

Error Message when Starting reads:

"The application failed to initialize properly (oxc0000135). Click OK to 
terminate the application."

(NCC will not open.)

NCCsetup_0.7.104 installed.
Windows XP SP3
Windows Media Player 11 is newly installed.
Window Acquisition Library 2.0 is newly installed.

I have uninstalled, reinstalled then reboot several times to no avial.
I've even ran regwia.bat thinking that might help, but it didn't.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1. Installed on a windows7 Sony Vaio VGN-NW150J
2. Open Program
3. Error appears.  Program never opens.

What is the expected output? What do you see instead?
Expected the program to open.  Error popup is returned instead.  See screenshot.

What version of the product are you using? On what operating system?
Latest Beta.  Also tried latest non-Beta.  Same result.

Please provide any additional information below.

See screenshot.

D300 don't have MTP command to set it on manual focus mode, or i don't find any 
similar command.
I need help from a developer with free time and owner of a D300 and some 
programming skills in C#

What steps will reproduce the problem?
1. Install NCCsetup_0.6.69.exe
2. StartUp

What version of the product are you using? On what operating system?
NCCsetup_0.6.69.exe on Win7/X64

Please provide any additional information below.
Seems i had no directory 'Default': from InnerException "The directory name 
C:\Users\<USERNAME>\Pictures\Default is invalid."


System.Windows.Markup.XamlParseException was unhandled
  Message='The invocation of the constructor on type 'CameraControl.MainWindow' that matches the specified binding constraints threw an exception.' Line number '7' and line position '70'.
  Source=PresentationFramework
  LineNumber=7
  LinePosition=70
  StackTrace:
       at System.Windows.Markup.XamlReader.RewrapException(Exception e, IXamlLineInfo lineInfo, Uri baseUri)
       at System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
       at System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
       at System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
       at System.Windows.Application.LoadBamlStreamWithSyncInfo(Stream stream, ParserContext pc)
       at System.Windows.Application.LoadComponent(Uri resourceLocator, Boolean bSkipJournaledProperties)
       at System.Windows.Application.DoStartup()
       at System.Windows.Application.<.ctor>b__1(Object unused)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)
       at System.Windows.Application.Run()
       at CameraControl.App.Main() in d:\devel\vs2010\CameraControl\CameraControl\obj\x86\Debug\App.g.cs:line 0
  InnerException: System.ArgumentException
       Message=The directory name C:\Users\<USERNAME>\Pictures\Default is invalid.
       Source=System
       StackTrace:
            at System.IO.FileSystemWatcher.set_Path(String value)
            at CameraControl.Classes.PhotoSession.set_Folder(String value) in d:\devel\vs2010\CameraControl\CameraControl\Classes\PhotoSession.cs:line 35
            at CameraControl.Classes.PhotoSession..ctor() in d:\devel\vs2010\CameraControl\CameraControl\Classes\PhotoSession.cs:line 92
            at CameraControl.Classes.Settings..ctor() in d:\devel\vs2010\CameraControl\CameraControl\Classes\Settings.cs:line 106
            at CameraControl.MainWindow..ctor() in d:\devel\vs2010\CameraControl\CameraControl\MainWindow.xaml.cs:line 45
       InnerException: 

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.
- It could be very useful to have an icon to shoot without activate AF for 
example when you adjust AF direct on the camera.

https://groups.google.com/d/topic/ncc-google-group/du97pssQ6R0/discussion

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


Please use labels and text to provide additional information.

"Another thing, I think you made a mistake for "delay" option. You wrote that 
it was in msec and I try and I think 50 msec will be quick but it wasn't... I 
finally got the shoot after about 50 SECONDS :)"