This program demonstrates the /objects library by implementing a simulated accumulator machine. I would recommend reading the library's separate documentation, in /objects/README.md. This documentation only explains the implementation of the machine.

In order to start the machine, run the following.

$ racket main.rkt

MemoryElement :=
  private value:  number
  public  read:   () => number
  public  write:  (newValue: number) => newValue

This object is meant to represent a memory element that can be read and written to.

The component meant to represent the main memory is composed of a vector of one-hundred memory elements, and a couple public methods to read and write to its elements.

Memory :=
  private elements: MemoryElement[100]
  public  read:     (index: number) => number
  public  write:    (index: number, newValue: number) => newValue
  public  dump:     () => string

Input/Output devices have one method each, read and write, respectively.

InputDevice :=
  public read:  () => number

OutputDevice :=
  public write: (output: number) => void

The CPU is where most of the logic of the program is performed. It's represented by the following members (note that Register is just an alias for MemoryElement):

CPU :=
  // registers
  private instruction-register: Register
  private program-counter:      Register
  private accumulator:          Register
  private mar:                  Register
  private mdr:                  Register

  // flags, for the bus refresh
  private store?:   boolean
  private load?:    boolean
  private input?:   boolean
  private output?:  boolean
  private halt?:    boolean

  // connected components
  private main-memory:    Memory
  private input-device:   InputDevice
  private output-device:  OutputDevice

  // methods for execution
  private bus-refresh:  () => void
  private fetch:        () => void
  private decode:       () => void
  private execute:      () => void
  
  // public methods
  public  load:   (lst: List) => void
  public  run:    () => 0

• Registers:

  • instruction-register: Holds the current instruction being executed.
  • program-counter: Keeps track of the address of the next instruction.
  • accumulator: Stores intermediate results of calculations.
  • mar: Memory Address Register, holds the address of the memory location to be accessed.
  • mdr: Memory Data Register, holds the data read from or written to memory.

• Flags:

  • store?: Indicates if a store operation is in progress.
  • load?: Indicates if a load operation is in progress.
  • input?: Indicates if an input operation is in progress.
  • output?: Indicates if an output operation is in progress.
  • halt?: Indicates if the CPU should halt execution.

• Connected components:

  • main-memory: Represents the system memory.
  • input-device: Represents an input device connected to the CPU.
  • output-device: Represents an output device connected to the CPU.

• Methods for execution:

  • bus-refresh: Handles data transfer between the CPU, memory, input, and output components.
  • fetch: Fetches the next instruction from memory.
  • decode: Decodes the fetched instruction.
  • execute: Executes the decoded instruction.

• Public methods:

  • load: Accepts a list of instructions represented by 3-4 digit decimal numbers and loads them into the main memory.
  • run: Starts the fetch-decode-execute cycle, executing the loaded program until the halt? flag is raised.