Provides a way to query Sungrow residential hybrid or string inverters for current state and statistics using ModBus TCP client.

Currently does not support any writing to holding registers.

Residential Hybrid Single Phase Inverter for Low Voltage Battery [48V to 70V]

SH3K6 / SH4K6 / SH5K-V13 (SH5K) / SH5K-20 / SH4K6-30 / SH5K-30 / SH3K6-30

Residential Hybrid Single Phase Inverter wide battery voltage range [80V to 460V]

SH3.6RS / SH4.6RS / SH5.0RS / SH6.0RS

Residential Hybrid Three Phase Inverter wide battery voltage range [80V to 460V]

SH5.0RT / SH6.0RT / SH8.0RT / SH10RT

SG3.0RT, SG4.0RT, SG5.0RT, SG6.0RT, SG7.0RT，SG8.0RT, SG10RT, SG12RT, SG15RT, SG17RT, SG20RT SG30KTL-M, SG30KTL-M-V31, SG33KTL-M, SG36KTL-M, SG33K3J, SG49K5J, SG34KJ, LP_P34KSG, SG50KTL-M-20, SG60KTL, G80KTL, SG80KTL-20, SG60KU-M SG5KTL-MT, SG6KTL-MT, SG8KTL-M, SG10KTL-M, SG10KTL-MT, SG12KTL-M, SG15KTL-M, SG17KTL-M, SG20KTL-M, SG80KTL-M, SG85BF, SG80HV, SG80BF, SG110HV-M, SG111HV, SG125HV, SG125HV-20 SG25CX-SA, SG30CX, SG33CX, SG40CX, SG50CX, SG36CX-US, SG60CX-US, SG75CX, SG100CX SG100CX-JP, SG110CX, SG136TX, SG225HX, SG250HX SG250HX-IN, SG250HX-US

Discontinued (as @ 2021-07-12):

SG30KTL, SG10KTL, SG12KTL, SG15KTL, SG20KTL, SG30KU, SG36KTL, SG36KU, SG40KTL, SG40KTL-M, SG50KTL-M, SG60KTL-M, SG60KU

If not called from within an async method

from sungrowinverter inport SungrowInverter
import asyncio
...

client = SungrowInverter("192.168.1.27")

loop = asyncio.new_event_loop()
asyncio.set_event_loop(loop)
result = loop.run_until_complete(client.async_update())

#Get a list data returned from the inverter.
print(client.data)

If called within an async method in your application

from sungrowinverter inport SungrowInverter

client = SungrowInverter("192.168.1.27")
client.async_update()

#Get a list data returned from the inverter.
print(client.model)
print(client.data)

** of course change 192.168.1.27 to your inverter's ip address.

SungrowInverter(ip_address, port=502, slave=0x01, retries=3, timeout=60)

port: modbus TCP port defaults to 502 on sungrow inverters used here

slave: defaulted to 0x01 as per specs your inverter may need to change this.

retries: number of attempts to query the registers on the inverter before failing

timeout: tcp connection is timed out and fails after this long

Available methods

client.inverter_model() Returns a object of sungrowinverter.common.SungrowInverterModel with details of model, serial, nominal output power (kWh)

client.async_update() Calls set of registers for the relevant inverter and updates data parameter

model: Provides device model (ie. SH5K - as found in current models supported above)

device_code: Sungrow device code found at register 5000 (refer docs for actual codes if needed)

serial_number: Serial number of the inverter

nominal_output_power: The output power that the inverter supports (ie. SH5K is a 5 kWh inverter and will contain 5.0 in this parameter)

inverter_type: [hybrid | string] - type of sungrow inverter that the client is communicating with, hybrid (battery supported inverter SHxxx series or standard inverter SGxxxx series)

mppt_input: The number of mppt inputs the inverter supports, refer notes below.

data: Provides a dictionary of data of all registers queried (key = register name, value = register value) refer to the https://github.com/mvandersteen/SungrowInverter/tree/main/sungrowinverter/configs for details on what registers are exposed.

battery_type: Show the battery type configured for the inverter

battery_energy_capacity: hybrid only, this will show the capacity of the battery configured for the inverter

client = SungrowInverter("192.168.1.27")
await client.async_update()

client.data['export_power'] - for this register it is a signed value if positive then the inverter is exporting to the grid, if negative then it is importing from the grid.

client.mppt_inputs - this value dictates how many client.data['mppt_xx_voltage'] & client.data['mppt_xx_current'] registers are available. These values have been obtained from the modbus specs found in the documents directory on this repository. If an inverter only supports 1 mppt connection then only 1 set of mppt_1_voltage and mppt_1_current will appear. If the inverter supports more then mppt_[xx]_voltage & mppt_[xx]_current; where [xx] = the number of mppt inputs the inverter supports; the number available depends on the how many the inverter supports can be 1 to 12 sets of data for current set of support inverters.

Refer to mvandersteen#2 if you are having issues, where @hallonstedt explains how to resolve for a prior version of python.

2024-05-13: I don't have a sungrow invester to test changes on any longer as house is being rebuilt, will look to update again once new build is complete and solar re-added. For now apologies will not be of much help to anyone other than accepting merge every now and then.

If you have an inverter not supported by this module BUT do get a response back from the sungrow inverter with a device ID, then you could follow what was done for this pull request https://github.com/mvandersteen/SungrowInverter/commit/9bef6dfcc4db7672edb1140b98bbdd34c672a987 by @ortogonal; that is add an entry for your inverter in the inverter list with your deviceID defined. Then if you have a 3 phase inverter (eg. SHxxRT or SGxxRT) add your inverter deviceID returned in unsupported message into the list of valid_inverters in the registers config config sections (see hybrid.py or string.py config files), (eg. ModBusRegister(5020, "phase_b_voltage", "U16", 0.1, VOLTAGE, valid_inverters=[0xE00,0xE01,0xE02,0xE03,0xE0D,0xE0E,0xE0F,0xE13])