Internal display not working only HDMI output about nootedred HOT 13 CLOSED

Please retry with the latest commit.

from nootedred.

Hi @VisualEhrmanntraut thank you very much. Last commit works well and finally my laptop booted with working screen.

from nootedred.

are you using the -NRedDPDelay boot-arg? If no, can you please try adding it and then try again to see if you get video output on your internal display?

from nootedred.

Yes I tried it with this boot-arg option but nothing changed.

from nootedred.

I am attaching agdcdiagnose log when HDMI is disconnected, so I can see in connections there is "DCC Failed". Maybe this can be issue.
agdcdiagnose.txt

from nootedred.

I am using the latest version of NootedRed.

Is this actually true or did you just click it to make the issue

from nootedred.

Misclick

from nootedred.

Hi, yes I tried many builds of nootedred next, but yes I am sure that I tried last, too.

from nootedred.

Hi @jalavoui I tried build from your post but without any success. I am attaching journal file from booting with drm debug boot flag from my kali linux:
journal.txt

from nootedred.

@pego149 is your BIOS up to date

from nootedred.

Hi, I also have a G14 Zephyrus and I follow the guide from this guy's repo. You could check the EFI out there and rebuild your hackintosh. I could confirm it works fine for me with the 2020 G14.
For me, the Ventura works better than the Sonoma, so if you want to use it, remember to switch to the Ventura branch as the main branch is for Sonoma. In my case, it's the 2020 model so I get the EFI inside the 2020 folder, I don't know which model you have so you could give it a shot with both the 2020 and 2021.

from nootedred.

@pego149 is your BIOS up to date

Hi, yes my BIOS is up to date

Hi, I also have a G14 Zephyrus and I follow the guide from this guy's repo. You could check the EFI out there and rebuild your hackintosh. I could confirm it works fine for me with the 2020 G14. For me, the Ventura works better than the Sonoma, so if you want to use it, remember to switch to the Ventura branch as the main branch is for Sonoma. In my case, it's the 2020 model so I get the EFI inside the 2020 folder, I don't know which model you have so you could give it a shot with both the 2020 and 2021.

Hi, thank you for answering. Yes I tried this repo as source of my EFI folder but still without success. If I disable nootedred.kext the internal display works normally but without acceleration. When I enable nootedred.kext the internal display powers off during boot and then the HDMI display turns on and everything is shown only there (doesn't matter if hdmi cable is connected or not)

from nootedred.

@pego149 is your BIOS up to date

Hi, yes my BIOS is up to date

Hi, I also have a G14 Zephyrus and I follow the guide from this guy's repo. You could check the EFI out there and rebuild your hackintosh. I could confirm it works fine for me with the 2020 G14. For me, the Ventura works better than the Sonoma, so if you want to use it, remember to switch to the Ventura branch as the main branch is for Sonoma. In my case, it's the 2020 model so I get the EFI inside the 2020 folder, I don't know which model you have so you could give it a shot with both the 2020 and 2021.

Hi, thank you for answering. Yes I tried this repo as source of my EFI folder but still without success. If I disable nootedred.kext the internal display works normally but without acceleration. When I enable nootedred.kext the internal display powers off during boot and then the HDMI display turns on and everything is shown only there (doesn't matter if hdmi cable is connected or not)

That's weird to hear. Maybe your model is not supported well? I think you should wait for updates from NootedRed as they will be released soon to fix remaining issues and may support some systems as yours.

from nootedred.