clumsylee / campnet Goto Github PK

I've been using this app and it's really amazing!

I would love to open an Android port and may use the same name (to be decided...), probably the same icon and UIs.

It would be great if it were possible. Thanks again for the efforts!

1.宿舍有线网更新认证方式，利用auth4.tsinghua.edu.cn认证，用net.tsinghua.edu.cn无法认证（且访问其他网页，均不会跳转到认证页面），这时用无线路由器转为无线后，APP无法识别为校园网，并且无法上线，但是网页认证后，用APP好像可以下线

2.如果想自己写认证配置，大概是什么步骤呢？楼主有没有推荐的教程之类的呢？

https://github.com/kishikawakatsumi/KeychainAccess#icloud_sharing
sunshinejr/SwiftyUserDefaults#86

没找到接口。可能和在同一 Wi-Fi 下有关。

测试发现安装CampNet之后，锁屏一段时间后wifi会断开，是否开启自动登录的原因？貌似关闭自动登录后问题依然存在。
网络环境：Tsinghua内有线网络，使用无线路由器连接。

"Change password" sounds like changing the actual password of the account. Apple's apps seem using "Re-enter Password" in this circumstance.

Proposed by 刘星粤.

Currently, the coverage is too low. The core part needs to be tested especially.

The readme should contain the following sections:

• Introduction
• Screenshots
• Installation via App Store
• Add new configuration file via CampNet-Configurations

Might need to set NSAllowsArbitraryLoads to true and explain it for reviewing.

If set to YES, disables all ATS restrictions for all network connections, apart from the connections to domains that you configure individually in the optional NSExceptionDomains dictionary. Default value is NO.

Note: Setting this key’s value to YES triggers App Store review and requires justification.

Also, might need to add third-party domains (e.g. Instabug, SwiftBeaver) to NSExceptionDomains.

If you add this key to your NSAppTransportSecurity dictionary, any domains you then name within the dictionary obtain the default, full ATS protections—irrespective of the value you set for the global NSAllowsArbitraryLoads key. Subkeys of a domain-name key then let you alter that domain’s ATS protections from its defaults.

https://developer.apple.com/library/content/documentation/General/Reference/InfoPlistKeyReference/Articles/CocoaKeys.html#//apple_ref/doc/uid/TP40009251-SW33