cmb33595 / ozex Goto Github PK

При выставлении OZEX_USE_LOG=0 не работает чтение 
данных с GPS-устройства.
Фикс в аттаче.

Start ozex with russian locale(ru_RU). Load any .wpt file with
waypoints(where coordinates decimal point is "."). In ozex all waypoints
coordinates are truncated to integer values.
It seems that ozex(swampex) works correctly only in case of locale has
decimal point set(LC_NUMERIC) to "."...
A simple workaround is to start ozex with LANG=C or LC_NUMERIC=c env

Need to replace dmake tool for project building to standard GNU make, 
configure etc.

Запускаем программу, жмем кнопку tools, 
попадает в окно tools
Нет возможности вернуться в главное окно, 
не выбрав какое либо из
предложенных действий.

What steps will reproduce the problem?
1. Setting OZEX_LAT and OZEX_LON inside the area covered by a map
causes ozex to crash at startup with segmentation fault. If OZEX_LAT and 
OZEX_LON points to outside the area coverded by map - ozex start OK, of course 
no map image is displayed.
2. Test done without gps device, OZEX_USE_LOG set to 0
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
Ubuntu both 32 and 64 bit

Please provide any additional information below.

First thought that it depends on Map Datum - I had o lot of maps in Pulkovo 
1942, but further test with maps in different datums gave same effect.

Szubi

Я думаю, что не помешает кнопка сброса 
увеличения/уменьшения карты на 100%

We need to add garmin and openstreetmaps formats support.
Garmin reading and rendering isn't a problem through libgarmin.

Open questions:

1. Vector data rendering library. Cairo produces high-quality output, but it 
not very fast. Antigrain is too "C++"

2. Library for OSM format support.

Не хватает индикатора, какое увеличение 
карты в данный момент

1. Запустить программу. Карта не 
перерисовывается
2. Ввести мышку в облать отображения карты. 
Прорисовывается бэкграунд с
шашечками и перекрестие.
3. Кликнуть мышкой по области отображения 
карты. Карта прорисовывается.

Hi,

It would be nice to be albe to choose a map location other than in 
/sdcard/Androzic/maps. For example /mnt/external_sd/maps or anywere else you 
like.

Regards,
Peter

Для работы программы нужно указать 
координаты точки для отображения карты.
Координаты зашиты в ozex.cpp. Если нужны другие 
начальные координаты,
приходится править cpp и перекомпилировать.

Recently I asked dn.smelov for a write access to help with maintenance of ozex. 
Here're things I'd like to do:

* Elaborate/clean up wiki
* Apply some patches for better error checking and logging
* Elaborate startup script and config file
* Switch to GNU Makefile as the default one
* Allow to build against system dependency libs

After that, work towards git migration and using swampex as standalone 
dependency lib, not code-duplicated within each project using it.

Конфигурационный файл. Точнее его 
отсутствие...

Поискал, что есть из готовых либов для 
работы с конфигами.
Вот что нашел:
1. libconfig   http://www.hyperrealm.com/libconfig/
2. glib-Key-value-file-parser  
http://library.gnome.org/devel/glib/unstable/glib-Key-value-file-parser.html
Правда glib потянет зависимости наверно

Были ли какие попытки реализовать конф 
файл?

Сначала разбить ozex.cpp на несколько файлов с 
классами (.h, .cpp).
Потом почистить работу с гпс.
Вынести  из кода ссылки на пути к иконкам, 
добавить каталог с ресурсами
озекса - датумы, картинки, etc
приделать wxConfig?

Hi,

I'd like to contrubute by providing a Dutch translation.

Regards,
Peter

The tile size (64 px default) is specified in the ozf2/3 header. In some 
cases, using larger tile sizes is prefered, for instance it's much faster to 
produce ozf2 files from GMaps (using ozfenc) with tile size equals to 256px 
without any conversion. 

OziExplorerCE support any tile size and I believe the same is for Ozi 
itself.

Уважаемые разработчики, не могли бы вы 
сделать ебилд для Gentoo?

What steps will reproduce the problem?
1. compile
2. set env variables (no GPS)
3. try to open map???

What is the expected output? What do you see instead?
 map opens (i have a bunch of .ozfx3 and .ozf2 maps in $OZEX_MAPS_PATH

What version of the product are you using? On what operating system?
 svn rev 33

Please provide any additional information below.

After clicking on the green round button this happens ($OZEX_GPS_DEV=""):
./ozex
ozexWindowDX: 800
ozexWindowDY: 600
ozexButtonDX: 64
ozexButtonDY: 64
ozexButtonGap: 10
ozexMapDX: 732
ozexMapDY: 542
ozexX: 60,382313
ozexY: 29,562426
openPort -1
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position
read: Bad file descriptor
on position

Не работают карты привязанные по двум 
точкам.
Например "C:\OziExplorer\Index Maps\World Index.map"

gauss() завершается с ошибкой, "Error - singular matrix.", 
в итоге переменные bind.Kx, bind.Ky, bind.Klat, bind.Klon 
остаются иниализированными начальными 
(случайными) значениями

What steps will reproduce the problem?
1. Compile and run

What is the expected output? What do you see instead?
The design intends multiple buttons on the right, as seen in the screenshot 
under Project Home.

My builds look different: buttons on every panel are stacked -- all positioned 
at (0,0), supposedly wxBoxSizer doesn't arrange them. Therefore only the last 
button is seen. It is usually possible to cycle through buttons by hitting Tab, 
however then the button with focus is _not_ the visible one (which even has the 
focus rectangle drawn). Still after some practice it is possible to open the 
tools panel, or even the waypoints panel, and observe that all panels have the 
same problem.

What version of the product are you using? On what operating system?
Current (revision 35), XP Pro SP2 or Fedora Core 12 via Virtual PC 2007.
Actually I encountered the problem in April 2010 (revision 33) though didn't 
try Linux back then.

Please provide any additional information below.
WxWidgets 2.8.11. A static debug build for Windows (it's my development 
machine), a shared build for Linux (wxGTK), both compiled from source.

I'm still new to wxWidgets. Their wiki entry for wxSizer explicitly recommends 
SetSizerAndFit() so there must be reason for that. Is it possible that all of 
you used an even older version of wxWidgets which automagically did the job?

The attached patch fixes the problem on both operating systems.