cyanogenmod / android_external_wpa_supplicant Goto Github PK
View Code? Open in Web Editor NEWThis project forked from havlenapetr/android_external_wpa_supplicant
android wifi binary
License: GNU General Public License v2.0
This project forked from havlenapetr/android_external_wpa_supplicant
android wifi binary
License: GNU General Public License v2.0
WPA Supplicant ============== Copyright (c) 2003-2008, Jouni Malinen <[email protected]> and contributors All Rights Reserved. This program is dual-licensed under both the GPL version 2 and BSD license. Either license may be used at your option. License ------- GPL v2: This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA (this copy of the license is in COPYING file) Alternatively, this software may be distributed, used, and modified under the terms of BSD license: Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Features -------- Supported WPA/IEEE 802.11i features: - WPA-PSK ("WPA-Personal") - WPA with EAP (e.g., with RADIUS authentication server) ("WPA-Enterprise") Following authentication methods are supported with an integrate IEEE 802.1X Supplicant: * EAP-TLS * EAP-PEAP/MSCHAPv2 (both PEAPv0 and PEAPv1) * EAP-PEAP/TLS (both PEAPv0 and PEAPv1) * EAP-PEAP/GTC (both PEAPv0 and PEAPv1) * EAP-PEAP/OTP (both PEAPv0 and PEAPv1) * EAP-PEAP/MD5-Challenge (both PEAPv0 and PEAPv1) * EAP-TTLS/EAP-MD5-Challenge * EAP-TTLS/EAP-GTC * EAP-TTLS/EAP-OTP * EAP-TTLS/EAP-MSCHAPv2 * EAP-TTLS/EAP-TLS * EAP-TTLS/MSCHAPv2 * EAP-TTLS/MSCHAP * EAP-TTLS/PAP * EAP-TTLS/CHAP * EAP-SIM * EAP-AKA * EAP-PSK * EAP-PAX * EAP-SAKE * EAP-GPSK * LEAP (note: requires special support from the driver for IEEE 802.11 authentication) (following methods are supported, but since they do not generate keying material, they cannot be used with WPA or IEEE 802.1X WEP keying) * EAP-MD5-Challenge * EAP-MSCHAPv2 * EAP-GTC * EAP-OTP - key management for CCMP, TKIP, WEP104, WEP40 - RSN/WPA2 (IEEE 802.11i) * pre-authentication * PMKSA caching Supported TLS/crypto libraries: - OpenSSL (default) - GnuTLS Internal TLS/crypto implementation (optional): - can be used in place of an external TLS/crypto library - TLSv1 - X.509 certificate processing - PKCS #1 - ASN.1 - RSA - bignum - minimal size (ca. 50 kB binary, parts of which are already needed for WPA; TLSv1/X.509/ASN.1/RSA/bignum parts are about 25 kB on x86) Requirements ------------ Current hardware/software requirements: - Linux kernel 2.4.x or 2.6.x with Linux Wireless Extensions v15 or newer - FreeBSD 6-CURRENT - NetBSD-current - Microsoft Windows with WinPcap (at least WinXP, may work with other versions) - drivers: Linux drivers that support WPA/WPA2 configuration with the generic Linux wireless extensions (WE-18 or newer). Even though there are number of driver specific interface included in wpa_supplicant, please note that Linux drivers are moving to use generic wireless extensions and driver_wext (-Dwext on wpa_supplicant command line) should be the default option to start with before falling back to driver specific interface. Host AP driver for Prism2/2.5/3 (development snapshot/v0.2.x) (http://hostap.epitest.fi/) Driver need to be set in Managed mode ('iwconfig wlan0 mode managed'). Please note that station firmware version needs to be 1.7.0 or newer to work in WPA mode. Linuxant DriverLoader (http://www.linuxant.com/driverloader/) with Windows NDIS driver for your wlan card supporting WPA. Agere Systems Inc. Linux Driver (http://www.agere.com/support/drivers/) Please note that the driver interface file (driver_hermes.c) and hardware specific include files are not included in the wpa_supplicant distribution. You will need to copy these from the source package of the Agere driver. madwifi driver for cards based on Atheros chip set (ar521x) (http://sourceforge.net/projects/madwifi/) Please note that you will need to modify the wpa_supplicant .config file to use the correct path for the madwifi driver root directory (CFLAGS += -I../madwifi/wpa line in example defconfig). ATMEL AT76C5XXx driver for USB and PCMCIA cards (http://atmelwlandriver.sourceforge.net/). Linux ndiswrapper (http://ndiswrapper.sourceforge.net/) with Windows NDIS driver. Broadcom wl.o driver This is a generic Linux driver for Broadcom IEEE 802.11a/g cards. However, it is proprietary driver that is not publicly available except for couple of exceptions, mainly Broadcom-based APs/wireless routers that use Linux. The driver binary can be downloaded, e.g., from Linksys support site (http://www.linksys.com/support/gpl.asp) for Linksys WRT54G. The GPL tarball includes cross-compiler and the needed header file, wlioctl.h, for compiling wpa_supplicant. This driver support in wpa_supplicant is expected to work also with other devices based on Broadcom driver (assuming the driver includes client mode support). Intel ipw2100 driver (http://sourceforge.net/projects/ipw2100/) Intel ipw2200 driver (http://sourceforge.net/projects/ipw2200/) In theory, any driver that supports Linux wireless extensions can be used with IEEE 802.1X (i.e., not WPA) when using ap_scan=0 option in configuration file. Wired Ethernet drivers (with ap_scan=0) BSD net80211 layer (e.g., Atheros driver) At the moment, this is for FreeBSD 6-CURRENT branch and NetBSD-current. Windows NDIS The current Windows port requires WinPcap (http://winpcap.polito.it/). See README-Windows.txt for more information. wpa_supplicant was designed to be portable for different drivers and operating systems. Hopefully, support for more wlan cards and OSes will be added in the future. See developer's documentation (http://hostap.epitest.fi/wpa_supplicant/devel/) for more information about the design of wpa_supplicant and porting to other drivers. One main goal is to add full WPA/WPA2 support to Linux wireless extensions to allow new drivers to be supported without having to implement new driver-specific interface code in wpa_supplicant. Optional libraries for layer2 packet processing: - libpcap (tested with 0.7.2, most relatively recent versions assumed to work, this is likely to be available with most distributions, http://tcpdump.org/) - libdnet (tested with v1.4, most versions assumed to work, http://libdnet.sourceforge.net/) These libraries are _not_ used in the default Linux build. Instead, internal Linux specific implementation is used. libpcap/libdnet are more portable and they can be used by adding CONFIG_L2_PACKET=pcap into .config. They may also be selected automatically for other operating systems. In case of Windows builds, WinPcap is used by default (CONFIG_L2_PACKET=winpcap). Optional libraries for EAP-TLS, EAP-PEAP, and EAP-TTLS: - OpenSSL (tested with 0.9.7c and 0.9.7d, and 0.9.8 versions; assumed to work with most relatively recent versions; this is likely to be available with most distributions, http://www.openssl.org/) - GnuTLS - internal TLSv1 implementation TLS options for EAP-FAST: - OpenSSL 0.9.8d _with_ openssl-0.9.8d-tls-extensions.patch applied (i.e., the default OpenSSL package does not include support for extensions needed for EAP-FAST) - internal TLSv1 implementation One of these libraries is needed when EAP-TLS, EAP-PEAP, EAP-TTLS, or EAP-FAST support is enabled. WPA-PSK mode does not require this or EAPOL/EAP implementation. A configuration file, .config, for compilation is needed to enable IEEE 802.1X/EAPOL and EAP methods. Note that EAP-MD5, EAP-GTC, EAP-OTP, and EAP-MSCHAPV2 cannot be used alone with WPA, so they should only be enabled if testing the EAPOL/EAP state machines. However, there can be used as inner authentication algorithms with EAP-PEAP and EAP-TTLS. See Building and installing section below for more detailed information about the wpa_supplicant build time configuration. WPA --- The original security mechanism of IEEE 802.11 standard was not designed to be strong and has proven to be insufficient for most networks that require some kind of security. Task group I (Security) of IEEE 802.11 working group (http://www.ieee802.org/11/) has worked to address the flaws of the base standard and has in practice completed its work in May 2004. The IEEE 802.11i amendment to the IEEE 802.11 standard was approved in June 2004 and published in July 2004. Wi-Fi Alliance (http://www.wi-fi.org/) used a draft version of the IEEE 802.11i work (draft 3.0) to define a subset of the security enhancements that can be implemented with existing wlan hardware. This is called Wi-Fi Protected Access<TM> (WPA). This has now become a mandatory component of interoperability testing and certification done by Wi-Fi Alliance. Wi-Fi provides information about WPA at its web site (http://www.wi-fi.org/OpenSection/protected_access.asp). IEEE 802.11 standard defined wired equivalent privacy (WEP) algorithm for protecting wireless networks. WEP uses RC4 with 40-bit keys, 24-bit initialization vector (IV), and CRC32 to protect against packet forgery. All these choices have proven to be insufficient: key space is too small against current attacks, RC4 key scheduling is insufficient (beginning of the pseudorandom stream should be skipped), IV space is too small and IV reuse makes attacks easier, there is no replay protection, and non-keyed authentication does not protect against bit flipping packet data. WPA is an intermediate solution for the security issues. It uses Temporal Key Integrity Protocol (TKIP) to replace WEP. TKIP is a compromise on strong security and possibility to use existing hardware. It still uses RC4 for the encryption like WEP, but with per-packet RC4 keys. In addition, it implements replay protection, keyed packet authentication mechanism (Michael MIC). Keys can be managed using two different mechanisms. WPA can either use an external authentication server (e.g., RADIUS) and EAP just like IEEE 802.1X is using or pre-shared keys without need for additional servers. Wi-Fi calls these "WPA-Enterprise" and "WPA-Personal", respectively. Both mechanisms will generate a master session key for the Authenticator (AP) and Supplicant (client station). WPA implements a new key handshake (4-Way Handshake and Group Key Handshake) for generating and exchanging data encryption keys between the Authenticator and Supplicant. This handshake is also used to verify that both Authenticator and Supplicant know the master session key. These handshakes are identical regardless of the selected key management mechanism (only the method for generating master session key changes). IEEE 802.11i / WPA2 ------------------- The design for parts of IEEE 802.11i that were not included in WPA has finished (May 2004) and this amendment to IEEE 802.11 was approved in June 2004. Wi-Fi Alliance is using the final IEEE 802.11i as a new version of WPA called WPA2. This includes, e.g., support for more robust encryption algorithm (CCMP: AES in Counter mode with CBC-MAC) to replace TKIP and optimizations for handoff (reduced number of messages in initial key handshake, pre-authentication, and PMKSA caching). wpa_supplicant -------------- wpa_supplicant is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. It implements WPA key negotiation with a WPA Authenticator and EAP authentication with Authentication Server. In addition, it controls the roaming and IEEE 802.11 authentication/association of the wlan driver. wpa_supplicant is designed to be a "daemon" program that runs in the background and acts as the backend component controlling the wireless connection. wpa_supplicant supports separate frontend programs and an example text-based frontend, wpa_cli, is included with wpa_supplicant. Following steps are used when associating with an AP using WPA: - wpa_supplicant requests the kernel driver to scan neighboring BSSes - wpa_supplicant selects a BSS based on its configuration - wpa_supplicant requests the kernel driver to associate with the chosen BSS - If WPA-EAP: integrated IEEE 802.1X Supplicant completes EAP authentication with the authentication server (proxied by the Authenticator in the AP) - If WPA-EAP: master key is received from the IEEE 802.1X Supplicant - If WPA-PSK: wpa_supplicant uses PSK as the master session key - wpa_supplicant completes WPA 4-Way Handshake and Group Key Handshake with the Authenticator (AP) - wpa_supplicant configures encryption keys for unicast and broadcast - normal data packets can be transmitted and received Building and installing ----------------------- In order to be able to build wpa_supplicant, you will first need to select which parts of it will be included. This is done by creating a build time configuration file, .config, in the wpa_supplicant root directory. Configuration options are text lines using following format: CONFIG_<option>=y. Lines starting with # are considered comments and are ignored. See defconfig file for an example configuration and a list of available options and additional notes. The build time configuration can be used to select only the needed features and limit the binary size and requirements for external libraries. The main configuration parts are the selection of which driver interfaces (e.g., hostap, madwifi, ..) and which authentication methods (e.g., EAP-TLS, EAP-PEAP, ..) are included. Following build time configuration options are used to control IEEE 802.1X/EAPOL and EAP state machines and all EAP methods. Including TLS, PEAP, or TTLS will require linking wpa_supplicant with OpenSSL library for TLS implementation. Alternatively, GnuTLS or the internal TLSv1 implementation can be used for TLS functionaly. CONFIG_IEEE8021X_EAPOL=y CONFIG_EAP_MD5=y CONFIG_EAP_MSCHAPV2=y CONFIG_EAP_TLS=y CONFIG_EAP_PEAP=y CONFIG_EAP_TTLS=y CONFIG_EAP_GTC=y CONFIG_EAP_OTP=y CONFIG_EAP_SIM=y CONFIG_EAP_AKA=y CONFIG_EAP_PSK=y CONFIG_EAP_SAKE=y CONFIG_EAP_GPSK=y CONFIG_EAP_PAX=y CONFIG_EAP_LEAP=y Following option can be used to include GSM SIM/USIM interface for GSM/UMTS authentication algorithm (for EAP-SIM/EAP-AKA). This requires pcsc-lite (http://www.linuxnet.com/) for smart card access. CONFIG_PCSC=y Following options can be added to .config to select which driver interfaces are included. Hermes driver interface needs to be downloaded from Agere (see above). CONFIG_WIRELESS_EXTENSION will be used automatically if any of the selected drivers need it. CONFIG_WIRELESS_EXTENSION=y CONFIG_DRIVER_HOSTAP=y CONFIG_DRIVER_HERMES=y CONFIG_DRIVER_MADWIFI=y CONFIG_DRIVER_ATMEL=y CONFIG_DRIVER_WEXT=y CONFIG_DRIVER_NDISWRAPPER=y CONFIG_DRIVER_BROADCOM=y CONFIG_DRIVER_IPW=y CONFIG_DRIVER_BSD=y CONFIG_DRIVER_NDIS=y Following example includes all features and driver interfaces that are included in the wpa_supplicant package: CONFIG_DRIVER_HOSTAP=y CONFIG_DRIVER_HERMES=y CONFIG_DRIVER_MADWIFI=y CONFIG_DRIVER_ATMEL=y CONFIG_DRIVER_WEXT=y CONFIG_DRIVER_NDISWRAPPER=y CONFIG_DRIVER_BROADCOM=y CONFIG_DRIVER_IPW=y CONFIG_DRIVER_BSD=y CONFIG_DRIVER_NDIS=y CONFIG_WIRELESS_EXTENSION=y CONFIG_IEEE8021X_EAPOL=y CONFIG_EAP_MD5=y CONFIG_EAP_MSCHAPV2=y CONFIG_EAP_TLS=y CONFIG_EAP_PEAP=y CONFIG_EAP_TTLS=y CONFIG_EAP_GTC=y CONFIG_EAP_OTP=y CONFIG_EAP_SIM=y CONFIG_EAP_AKA=y CONFIG_EAP_PSK=y CONFIG_EAP_SAKE=y CONFIG_EAP_GPSK=y CONFIG_EAP_PAX=y CONFIG_EAP_LEAP=y CONFIG_PCSC=y EAP-PEAP and EAP-TTLS will automatically include configured EAP methods (MD5, OTP, GTC, MSCHAPV2) for inner authentication selection. After you have created a configuration file, you can build wpa_supplicant and wpa_cli with 'make' command. You may then install the binaries to a suitable system directory, e.g., /usr/local/bin. Example commands: # build wpa_supplicant and wpa_cli make # install binaries (this may need root privileges) cp wpa_cli wpa_supplicant /usr/local/bin You will need to make a configuration file, e.g., /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. Configuration file section below includes explanation fo the configuration file format and includes various examples. Once the configuration is ready, you can test whether the configuration work by first running wpa_supplicant with following command to start it on foreground with debugging enabled: wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d Assuming everything goes fine, you can start using following command to start wpa_supplicant on background without debugging: wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B Please note that if you included more than one driver interface in the build time configuration (.config), you may need to specify which interface to use by including -D<driver name> option on the command line. See following section for more details on command line options for wpa_supplicant. Command line options -------------------- usage: wpa_supplicant [-BddfhKLqqtuvwW] [-P<pid file>] [-g<global ctrl>] \ -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-p<driver_param>] \ [-b<br_ifname> [-N -i<ifname> -c<conf> [-C<ctrl>] [-D<driver>] \ [-p<driver_param>] [-b<br_ifname>] ...] options: -b = optional bridge interface name -B = run daemon in the background -c = Configuration file -C = ctrl_interface parameter (only used if -c is not) -i = interface name -d = increase debugging verbosity (-dd even more) -D = driver name -f = Log output to default log location (normally /tmp) -g = global ctrl_interface -K = include keys (passwords, etc.) in debug output -t = include timestamp in debug messages -h = show this help text -L = show license (GPL and BSD) -p = driver parameters -P = PID file -q = decrease debugging verbosity (-qq even less) -v = show version -w = wait for interface to be added, if needed -W = wait for a control interface monitor before starting -N = start describing new interface drivers: hostap = Host AP driver (Intersil Prism2/2.5/3) [default] (this can also be used with Linuxant DriverLoader) hermes = Agere Systems Inc. driver (Hermes-I/Hermes-II) madwifi = MADWIFI 802.11 support (Atheros, etc.) atmel = ATMEL AT76C5XXx (USB, PCMCIA) wext = Linux wireless extensions (generic) ndiswrapper = Linux ndiswrapper broadcom = Broadcom wl.o driver ipw = Intel ipw2100/2200 driver (old; use wext with Linux 2.6.13 or newer) wired = wpa_supplicant wired Ethernet driver bsd = BSD 802.11 support (Atheros, etc.) ndis = Windows NDIS driver In most common cases, wpa_supplicant is started with wpa_supplicant -Bw -c/etc/wpa_supplicant.conf -iwlan0 This makes the process fork into background and wait for the wlan0 interface if it is not available at startup time. The easiest way to debug problems, and to get debug log for bug reports, is to start wpa_supplicant on foreground with debugging enabled: wpa_supplicant -c/etc/wpa_supplicant.conf -iwlan0 -d wpa_supplicant can control multiple interfaces (radios) either by running one process for each interface separately or by running just one process and list of options at command line. Each interface is separated with -N argument. As an example, following command would start wpa_supplicant for two interfaces: wpa_supplicant \ -c wpa1.conf -i wlan0 -D hostap -N \ -c wpa2.conf -i ath0 -D madwifi If the interface is added in a Linux bridge (e.g., br0), the bridge interface needs to be configured to wpa_supplicant in addition to the main interface: wpa_supplicant -cw.conf -Dmadwifi -iath0 -bbr0 Configuration file ------------------ wpa_supplicant is configured using a text file that lists all accepted networks and security policies, including pre-shared keys. See example configuration file, wpa_supplicant.conf, for detailed information about the configuration format and supported fields. Changes to configuration file can be reloaded be sending SIGHUP signal to wpa_supplicant ('killall -HUP wpa_supplicant'). Similarly, reloading can be triggered with 'wpa_cli reconfigure' command. Configuration file can include one or more network blocks, e.g., one for each used SSID. wpa_supplicant will automatically select the best betwork based on the order of network blocks in the configuration file, network security level (WPA/WPA2 is preferred), and signal strength. Example configuration files for some common configurations: 1) WPA-Personal (PSK) as home network and WPA-Enterprise with EAP-TLS as work network # allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel # # home network; allow all valid ciphers network={ ssid="home" scan_ssid=1 key_mgmt=WPA-PSK psk="very secret passphrase" } # # work network; use EAP-TLS with WPA; allow only CCMP and TKIP ciphers network={ ssid="work" scan_ssid=1 key_mgmt=WPA-EAP pairwise=CCMP TKIP group=CCMP TKIP eap=TLS identity="[email protected]" ca_cert="/etc/cert/ca.pem" client_cert="/etc/cert/user.pem" private_key="/etc/cert/user.prv" private_key_passwd="password" } 2) WPA-RADIUS/EAP-PEAP/MSCHAPv2 with RADIUS servers that use old peaplabel (e.g., Funk Odyssey and SBR, Meetinghouse Aegis, Interlink RAD-Series) ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel network={ ssid="example" scan_ssid=1 key_mgmt=WPA-EAP eap=PEAP identity="[email protected]" password="foobar" ca_cert="/etc/cert/ca.pem" phase1="peaplabel=0" phase2="auth=MSCHAPV2" } 3) EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the unencrypted use. Real identity is sent only within an encrypted TLS tunnel. ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel network={ ssid="example" scan_ssid=1 key_mgmt=WPA-EAP eap=TTLS identity="[email protected]" anonymous_identity="[email protected]" password="foobar" ca_cert="/etc/cert/ca.pem" phase2="auth=MD5" } 4) IEEE 802.1X (i.e., no WPA) with dynamic WEP keys (require both unicast and broadcast); use EAP-TLS for authentication ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel network={ ssid="1x-test" scan_ssid=1 key_mgmt=IEEE8021X eap=TLS identity="[email protected]" ca_cert="/etc/cert/ca.pem" client_cert="/etc/cert/user.pem" private_key="/etc/cert/user.prv" private_key_passwd="password" eapol_flags=3 } 5) Catch all example that allows more or less all configuration modes. The configuration options are used based on what security policy is used in the selected SSID. This is mostly for testing and is not recommended for normal use. ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel network={ ssid="example" scan_ssid=1 key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE pairwise=CCMP TKIP group=CCMP TKIP WEP104 WEP40 psk="very secret passphrase" eap=TTLS PEAP TLS identity="[email protected]" password="foobar" ca_cert="/etc/cert/ca.pem" client_cert="/etc/cert/user.pem" private_key="/etc/cert/user.prv" private_key_passwd="password" phase1="peaplabel=0" ca_cert2="/etc/cert/ca2.pem" client_cert2="/etc/cer/user.pem" private_key2="/etc/cer/user.prv" private_key2_passwd="password" } 6) Authentication for wired Ethernet. This can be used with 'wired' interface (-Dwired on command line). ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel ap_scan=0 network={ key_mgmt=IEEE8021X eap=MD5 identity="user" password="password" eapol_flags=0 } Certificates ------------ Some EAP authentication methods require use of certificates. EAP-TLS uses both server side and client certificates whereas EAP-PEAP and EAP-TTLS only require the server side certificate. When client certificate is used, a matching private key file has to also be included in configuration. If the private key uses a passphrase, this has to be configured in wpa_supplicant.conf ("private_key_passwd"). wpa_supplicant supports X.509 certificates in PEM and DER formats. User certificate and private key can be included in the same file. If the user certificate and private key is received in PKCS#12/PFX format, they need to be converted to suitable PEM/DER format for wpa_supplicant. This can be done, e.g., with following commands: # convert client certificate and private key to PEM format openssl pkcs12 -in example.pfx -out user.pem -clcerts # convert CA certificate (if included in PFX file) to PEM format openssl pkcs12 -in example.pfx -out ca.pem -cacerts -nokeys wpa_cli ------- wpa_cli is a text-based frontend program for interacting with wpa_supplicant. It is used to query current status, change configuration, trigger events, and request interactive user input. wpa_cli can show the current authentication status, selected security mode, dot11 and dot1x MIBs, etc. In addition, it can configure some variables like EAPOL state machine parameters and trigger events like reassociation and IEEE 802.1X logoff/logon. wpa_cli provides a user interface to request authentication information, like username and password, if these are not included in the configuration. This can be used to implement, e.g., one-time-passwords or generic token card authentication where the authentication is based on a challenge-response that uses an external device for generating the response. The control interface of wpa_supplicant can be configured to allow non-root user access (ctrl_interface_group in the configuration file). This makes it possible to run wpa_cli with a normal user account. wpa_cli supports two modes: interactive and command line. Both modes share the same command set and the main difference is in interactive mode providing access to unsolicited messages (event messages, username/password requests). Interactive mode is started when wpa_cli is executed without including the command as a command line parameter. Commands are then entered on the wpa_cli prompt. In command line mode, the same commands are entered as command line arguments for wpa_cli. Interactive authentication parameters request When wpa_supplicant need authentication parameters, like username and password, which are not present in the configuration file, it sends a request message to all attached frontend programs, e.g., wpa_cli in interactive mode. wpa_cli shows these requests with "CTRL-REQ-<type>-<id>:<text>" prefix. <type> is IDENTITY, PASSWORD, or OTP (one-time-password). <id> is a unique identifier for the current network. <text> is description of the request. In case of OTP request, it includes the challenge from the authentication server. The reply to these requests can be given with 'identity', 'password', and 'otp' commands. <id> needs to be copied from the the matching request. 'password' and 'otp' commands can be used regardless of whether the request was for PASSWORD or OTP. The main difference between these two commands is that values given with 'password' are remembered as long as wpa_supplicant is running whereas values given with 'otp' are used only once and then forgotten, i.e., wpa_supplicant will ask frontend for a new value for every use. This can be used to implement one-time-password lists and generic token card -based authentication. Example request for password and a matching reply: CTRL-REQ-PASSWORD-1:Password needed for SSID foobar > password 1 mysecretpassword Example request for generic token card challenge-response: CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar > otp 2 9876 wpa_cli commands status = get current WPA/EAPOL/EAP status mib = get MIB variables (dot1x, dot11) help = show this usage help interface [ifname] = show interfaces/select interface level <debug level> = change debug level license = show full wpa_cli license logoff = IEEE 802.1X EAPOL state machine logoff logon = IEEE 802.1X EAPOL state machine logon set = set variables (shows list of variables when run without arguments) pmksa = show PMKSA cache reassociate = force reassociation reconfigure = force wpa_supplicant to re-read its configuration file preauthenticate <BSSID> = force preauthentication identity <network id> <identity> = configure identity for an SSID password <network id> <password> = configure password for an SSID pin <network id> <pin> = configure pin for an SSID otp <network id> <password> = configure one-time-password for an SSID passphrase <network id> <passphrase> = configure private key passphrase for an SSID bssid <network id> <BSSID> = set preferred BSSID for an SSID list_networks = list configured networks select_network <network id> = select a network (disable others) enable_network <network id> = enable a network disable_network <network id> = disable a network add_network = add a network remove_network <network id> = remove a network set_network <network id> <variable> <value> = set network variables (shows list of variables when run without arguments) get_network <network id> <variable> = get network variables save_config = save the current configuration disconnect = disconnect and wait for reassociate command before connecting scan = request new BSS scan scan_results = get latest scan results get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilies terminate = terminate wpa_supplicant quit = exit wpa_cli wpa_cli command line options wpa_cli [-p<path to ctrl sockets>] [-i<ifname>] [-hvB] [-a<action file>] \ [-P<pid file>] [-g<global ctrl>] [command..] -h = help (show this usage text) -v = shown version information -a = run in daemon mode executing the action file based on events from wpa_supplicant -B = run a daemon in the background default path: /var/run/wpa_supplicant default interface: first interface found in socket path Using wpa_cli to run external program on connect/disconnect ----------------------------------------------------------- wpa_cli can used to run external programs whenever wpa_supplicant connects or disconnects from a network. This can be used, e.g., to update network configuration and/or trigget DHCP client to update IP addresses, etc. One wpa_cli process in "action" mode needs to be started for each interface. For example, the following command starts wpa_cli for the default ingterface (-i can be used to select the interface in case of more than one interface being used at the same time): wpa_cli -a/sbin/wpa_action.sh -B The action file (-a option, /sbin/wpa_action.sh in this example) will be executed whenever wpa_supplicant completes authentication (connect event) or detects disconnection). The action script will be called with two command line arguments: interface name and event (CONNECTED or DISCONNECTED). If the action script needs to get more information about the current network, it can use 'wpa_cli status' to query wpa_supplicant for more information. Following example can be used as a simple template for an action script: #!/bin/sh IFNAME=$1 CMD=$2 if [ "$CMD" == "CONNECTED" ]; then SSID=`wpa_cli -i$IFNAME status | grep ^ssid= | cut -f2- -d=` # configure network, signal DHCP client, etc. fi if [ "$CMD" == "DISCONNECTED" ]; then # remove network configuration, if needed fi Integrating with pcmcia-cs/cardmgr scripts ------------------------------------------ wpa_supplicant needs to be running when using a wireless network with WPA. It can be started either from system startup scripts or from pcmcia-cs/cardmgr scripts (when using PC Cards). WPA handshake must be completed before data frames can be exchanged, so wpa_supplicant should be started before DHCP client. Command line option '-w' can be used if wpa_supplicant is started before the wireless LAN interface is present (e.g., before inserting the PC Card) or is not yet up. For example, following small changes to pcmcia-cs scripts can be used to enable WPA support: Add MODE="Managed" and WPA="y" to the network scheme in /etc/pcmcia/wireless.opts. Add the following block to the end of 'start' action handler in /etc/pcmcia/wireless: if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then /usr/local/bin/wpa_supplicant -Bw -c/etc/wpa_supplicant.conf \ -i$DEVICE fi Add the following block to the end of 'stop' action handler (may need to be separated from other actions) in /etc/pcmcia/wireless: if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then killall wpa_supplicant fi This will make cardmgr start wpa_supplicant when the card is plugged in. wpa_supplicant will wait until the interface is set up--either when a static IP address is configured or when DHCP client is started--and will then negotiate keys with the AP. Dynamic interface add and operation without configuration files --------------------------------------------------------------- wpa_supplicant can be started without any configuration files or network interfaces. When used in this way, a global (i.e., per wpa_supplicant process) control interface is used to add and remove network interfaces. Each network interface can then be configured through a per-network interface control interface. For example, following commands show how to start wpa_supplicant without any network interfaces and then add a network interface and configure a network (SSID): # Start wpa_supplicant in the background wpa_supplicant -g/var/run/wpa_supplicant-global -B # Add a new interface (wlan0, no configuration file, driver=wext, and # enable control interface) wpa_cli -g/var/run/wpa_supplicant-global interface_add wlan0 \ "" wext /var/run/wpa_supplicant # Configure a network using the newly added network interface: wpa_cli -iwlan0 add_network wpa_cli -iwlan0 set_network 0 ssid '"test"' wpa_cli -iwlan0 set_network 0 key_mgmt WPA-PSK wpa_cli -iwlan0 set_network 0 psk '"12345678"' wpa_cli -iwlan0 set_network 0 pairwise TKIP wpa_cli -iwlan0 set_network 0 group TKIP wpa_cli -iwlan0 set_network 0 proto WPA wpa_cli -iwlan0 enable_network 0 # At this point, the new network interface should start trying to associate # with the WPA-PSK network using SSID test. # Remove network interface wpa_cli -g/var/run/wpa_supplicant-global interface_remove wlan0
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.