CAN BUS tools in Python 3.
- DBC, KCD, SYM, ARXML 4 and CDD file parsing.
- CAN message encoding and decoding.
- Simple and extended signal multiplexing.
- Diagnostic DID encoding and decoding.
candumpoutput decoder.- Node tester.
- C source code generator.
- CAN bus monitor.
Python 2 support is deprecated as Python 3 has better unicode support.
Project homepage: https://github.com/eerimoq/cantools
Documentation: http://cantools.readthedocs.org/en/latest
pip install cantoolsThe example starts by parsing a small DBC-file and printing its messages and signals.
>>> import cantools
>>> from pprint import pprint
>>> db = cantools.database.load_file('tests/files/motohawk.dbc')
>>> db.messages
[message('ExampleMessage', 0x1f0, False, 8, 'Example message used as template in MotoHawk models.')]
>>> example_message = db.get_message_by_name('ExampleMessage')
>>> pprint(example_message.signals)
[signal('Enable', 7, 1, 'big_endian', False, 1.0, 0, 0.0, 0.0, '-', False, None, {0: 'Disabled', 1: 'Enabled'}, None),
signal('AverageRadius', 6, 6, 'big_endian', False, 0.1, 0, 0.0, 5.0, 'm', False, None, None, ''),
signal('Temperature', 0, 12, 'big_endian', True, 0.01, 250, 229.53, 270.47, 'degK', False, None, None, None)]The example continues encoding a message and sending it on a CAN bus using the python-can package.
>>> import can
>>> can_bus = can.interface.Bus('vcan0', bustype='socketcan')
>>> data = example_message.encode({'Temperature': 250.1, 'AverageRadius': 3.2, 'Enable': 1})
>>> message = can.Message(arbitration_id=example_message.frame_id, data=data)
>>> can_bus.send(message)Alternatively, a message can be encoded using the encode_message() method on the database object.
The last part of the example receives and decodes a CAN message.
>>> message = can_bus.recv()
>>> db.decode_message(message.arbitration_id, message.data)
{'AverageRadius': 3.2, 'Enable': 'Enabled', 'Temperature': 250.09}See examples for additional examples.
Decode CAN frames captured with the Linux program candump.
$ candump vcan0 | cantools decode tests/files/motohawk.dbc
vcan0 1F0 [8] 80 4A 0F 00 00 00 00 00 ::
ExampleMessage(
Enable: 'Enabled' -,
AverageRadius: 0.0 m,
Temperature: 255.92 degK
)
vcan0 1F0 [8] 80 4A 0F 00 00 00 00 00 ::
ExampleMessage(
Enable: 'Enabled' -,
AverageRadius: 0.0 m,
Temperature: 255.92 degK
)
vcan0 1F0 [8] 80 4A 0F 00 00 00 00 00 ::
ExampleMessage(
Enable: 'Enabled' -,
AverageRadius: 0.0 m,
Temperature: 255.92 degK
)Alternatively, the decoded message can be printed on a single line:
$ candump vcan0 | cantools decode --single-line tests/files/motohawk.dbc
vcan0 1F0 [8] 80 4A 0F 00 00 00 00 00 :: ExampleMessage(Enable: 'Enabled' -, AverageRadius: 0.0 m, Temperature: 255.92 degK)
vcan0 1F0 [8] 80 4A 0F 00 00 00 00 00 :: ExampleMessage(Enable: 'Enabled' -, AverageRadius: 0.0 m, Temperature: 255.92 degK)
vcan0 1F0 [8] 80 4A 0F 00 00 00 00 00 :: ExampleMessage(Enable: 'Enabled' -, AverageRadius: 0.0 m, Temperature: 255.92 degK)Dump given database in a human readable format:
$ cantools dump tests/files/motohawk.dbc
================================= Messages =================================
------------------------------------------------------------------------
Name: ExampleMessage
Id: 0x1f0
Length: 8 bytes
Cycle time: - ms
Senders: PCM1
Layout:
Bit
7 6 5 4 3 2 1 0
+---+---+---+---+---+---+---+---+
0 |<-x|<---------------------x|<--|
+---+---+---+---+---+---+---+---+
| +-- AverageRadius
+-- Enable
+---+---+---+---+---+---+---+---+
1 |-------------------------------|
+---+---+---+---+---+---+---+---+
2 |----------x| | | | | |
B +---+---+---+---+---+---+---+---+
y +-- Temperature
t +---+---+---+---+---+---+---+---+
e 3 | | | | | | | | |
+---+---+---+---+---+---+---+---+
4 | | | | | | | | |
+---+---+---+---+---+---+---+---+
5 | | | | | | | | |
+---+---+---+---+---+---+---+---+
6 | | | | | | | | |
+---+---+---+---+---+---+---+---+
7 | | | | | | | | |
+---+---+---+---+---+---+---+---+
Signal tree:
-- {root}
+-- Enable
+-- AverageRadius
+-- Temperature
Signal choices:
Enable
0 Disabled
1 Enabled
------------------------------------------------------------------------Generate C source code from given database.
The generated code contains:
- Message structs.
- Message pack and unpack functions.
- Signal encode and decode functions.
- Frame id, length, type, cycle time and signal choices defines.
Known limitations:
- The maximum signal size is 64 bits, which in practice is never exceeded.
Below is an example of how to generate C source code from a database. The database is tests/files/motohawk.dbc.
$ cantools generate_c_source tests/files/motohawk.dbc
Successfully generated motohawk.h and motohawk.c.See motohawk.h and motohawk.c for the contents of the generated files.
In the next example we use --database-name to set a custom namespace for all generated types, defines and functions. The output file names are also changed by this option.
$ cantools generate_c_source --database-name my_database_name tests/files/motohawk.dbc
Successfully generated my_database_name.h and my_database_name.c.See my_database_name.h and my_database_name.c for the contents of the generated files.
In the last example we use --no-floating-point-numbers to generate code without floating point types, i.e. float and double.
$ cantools generate_c_source --no-floating-point-numbers tests/files/motohawk.dbc
Successfully generated motohawk.h and motohawk.c.See motohawk_no_floating_point_numbers.h and motohawk_no_floating_point_numbers.c for the contents of the generated files.
Other C code generators:
- http://www.coderdbc.com
- https://github.com/howerj/dbcc
- https://github.com/lonkamikaze/hsk-libs/blob/master/scripts/dbc2c.awk
- https://sourceforge.net/projects/comframe/
Monitor CAN bus traffic in a text based user interface.
$ cantools monitor tests/files/motohawk.dbc
The menu at the bottom of the monitor shows the available commands.
- Quit: Quit the monitor. Ctrl-C can be used as well.
- Filter: Only display messages matching given regular expression. Press <Enter> to return to the menu from the filter input line.
- Play/Pause: Toggle between playing and paused (or running and freezed).
- Reset: Reset the monitor to its initial state.
- Fork the repository.
Install prerequisites.
pip install -r requirements.txt- Implement the new feature or bug fix.
- Implement test case(s) to ensure that future changes do not break legacy.
Run the tests.
make test- Create a pull request.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent