This is the main Kiibohd Firmware. In general, this should be the only git repo you need to clone. The KLL git repo is automatically cloned during the build process.

Please refer to the KLL repo or kiibohd.com for details on the KLL (Keyboard Layout Language) Spec.

Visit our Discord Channel

• Infinity 60%
• Infinity 60% LED
• Infinity Ergodox
• K-Type
• WhiteFox

The Kiibohd firmware supports a lot of other keyboards, but these are more obscure/custom/lesser known.

Compilation is possible and tested on Windows/Linux/Mac. Linux is the easiest using this VM.

For most people refer here.

For the full compilation details, please refer to the wiki.

• Teensy 2.0 (Deprecated)
• Teensy 2.0++ (Deprecated)
• Teensy 3.0
• Teensy 3.1/3.2
• mk20dx128vlf5
• mk20dx256vlh7

Adding support for more microcontrollers is possible. Some considerations for minimum specs:

• ~8 kB of SRAM
• ~25 kB of Flash

It's possible to port chips with lower specs, but will be more effort and have fewer features.

Scan <-> Macro <-> Output

• Debug Modules - Debug support modules (e.g. cli)
• Scan Modules - Defines keyboard behaviour (e.g. K-Type)
• Macro Modules - KLL support modules
• Output Modules - Defines what the keyboard talks over (e.g. USB)

General Code can be found in Lib.

A custom bootloader (based off of McHCK) is available. This is only necessary when assembling a keyboard with a blank MCU or if you're attempting to re-flash your bootloader (requires external tools).

Bootloader

Contributions welcome!

• Bug reports
• Documentation and Wiki editing
• Patches (including new features)

Licensing is done on a per-file basis. Some of the source code is from PJRC/Teensy, other source code is from the McHck Project. Code written specifically for the Kiibohd Controller use the following licenses:

• MIT
• GPLv3
• Public Domain