deeplyfriedchicken / jared-pc Goto Github PK

Just curious if you tested it, since I tried before and it locked me out of the system.

Hallo from Germany,

I have the sam configuration, but the BCM94350ZAE (Dell 1820A) will only work for Wlan not for Bluetooth and only when the Intel card was before in the m.2 connector.

When i have the Dell inside and make a Mainboard Reset then the OSX hangs (also win 10 can not start the dell) . When i remove the Dell, insert the Intel and then put the the Dell back, it works again.

What can i do? Is this a Bios Problem ( I tried 1.2 and 1.5 ). Or are there various Dell 1820A cards

I have the same Lenovo BCM Card and BIOS 4.0. I cant turn wifi on at all. Bluetooth works fine. Any suggestions?

TB3 HotPlug Have a try. https://github.com/al3xtjames/ThunderboltPkg

Should be able to at least do 1440p

Hi,

Running a nearly identical hardware set.. not sure how you've got TB3 working, doesn't seem to recognize any hardware in system report. Also have some spotty-ness with the DW1560.. any help is appreciated!

Thanks a lot
V

Hello. Thanks for sharing your guide!

I built a hackintosh a while ago with built-in Intel Wi-Fi card (with only BT working of course), and now looking for a macOS-supported card to activate AirDrop.

Now since your card is an M.2 one, I was wondering how you managed to connect it. Is it through replacing the built-in card, or by using another M.2 or PCI-e slot?

I'm asking this since it would be ideal to just replace the built-in card and not waste slots, but I heard some things about normal M.2 cards like these not being supported by the CNVi interface found on both your ASRock and my Gigabyte motherboards.

Also, is there a reason you changed your Wi-Fi card? Your old one is more shipping-accessible to me, so I'm wondering if you faced any problems with it, or is it still a good option?

Hi，I think we have similar computer configurations
Parts
Intel Core i9-9900k
ASRock Z390 Phantom Gaming-ITX/AC
AMD Sapphire RX590
16gb (2 x 8gb) Corsair Vengeance DDR4 3600MHz
KingSton 500gb - NVMe PCIe M.2.
Broadcom BCM94352Z (Dell DW1560)

But, when I use your EFI , an error shows up:
Failed to open \EFI\BOOT\grubx64.efi - Not Found
Failed to load image \EFI\BOOT\grubx64.efi: Not found
start_image() returned Not Found
_
I am begging your help, thanks very very much :)

Preview stops responding when I try to open images, probably something with the igpu

Opencore is a lot more stable and reliable. Seems like that's what the community is moving to

https://dortania.github.io/OpenCore-Install-Guide/

https://dortania.github.io/OpenCore-Post-Install/

• Updating OpenCore, kexts and macOS
• Fixing DRM support and iGPU performance
• Optimizing Power Management
• Fixing Sleep

README not remove content like following quote. and have some duplicate text.

<<<<<<< HEAD
P.S. Nice Case~