OpenTag is an open-source RTOS that implements the DASH7 standard for wireless sensor networking and M2M comms. DASH7 is a wireless standard that was borne out of the US Military, and it is designed for extreme low-power and low- latency wireless communication, so it is great for communication between moving things or for anything that can benefit from a lower power requirement. DASH7 is also designed to finally eliminate "Application Profiles" as it introduces a filesystem and data methodology not available to any other WSN/M2M/IoT standard. Most DASH7 devices can be re-mapped over-the-air to take-on vastly different applications (sort of like the scene in "The Matrix" where Trinity learns to fly a helicopter).

OpenTag was created and is maintained by JP Norair. Norair also invented DASH7 during the same time, so there is a high degree of synergy between the standard and the implementation. Do not be fooled by the small build size: OpenTag is a full-featured, real-time exokernel with a large API and library. It is capable of communicating with native DASH7 peers as well as UDP, SCTP (future), and NDEF connections.

OpenTag is designed to run on a hardware platform that includes a low-power microcontroller plus a 433 MHz RF transceiver. However, much of it can also be compiled and run in a POSIX standard-C environment. On the MSP430, a typical endpoint build might require 16-24KB ROM (Flash) and 2KB RAM. For gateway or router projects, a typical MSP430 build requires 20-32KB ROM and 3-4KB RAM. As a "rule of thumb," Cortex-M builds tend to use about 12% more program memory (flash) and 33% more RAM.

OpenTag is increasing targeting Cortex-M as the "standard" MCU, although it also runs nicely on CC430, MSP430F5, MSP430F6, and RF430 devices from Texas Instruments. Officially, there is no roadmap to support MCUs that are not Cortex-M or MSP430F5 derived. However, OpenTag is very portable, and community porting efforts to other platforms are welcome. MCUs actively supported are: ST STM32F10x, ST STM32L1xx, TI CC430F5/6, TI MSP430F5/6, TI RF430F5978.

The RF transceiver component for OpenTag must comply to the DASH7 requirements, which means that it should support GFSK and MSK modulation in the 433 MHz band. Transceivers that are actively supported at this time of writing are: ST SPIRIT1, TI CC430, TI CC110x. Several other devices have been supported in the past, and many devices are suitable for use with OpenTag.

This is the OpenTag Mainline Distribution. It is maintained by JP Norair, the creator of OpenTag and inventor of the DASH7 wireless specification.

The Haystack Distribution of OpenTag (HDO) is a superset of the mainline distribution, by Haystack Technologies (http://www.haystacktechnologies.com). HDO includes a number of features, patches, and APIs that are not available in the mainline distribution. Haystack tends to release one of its proprietary improvements back into the mainline distribution each six months.

Repository: http://www.github.com/jpnorair/opentag Public Wiki: http://www.indigresso.com/wiki/doku.php Public Forum: http://www.indigresso.com/forum/ Pro Support: http://www.haystacktechnologies.com

OpenTag uses the OpenTag License, which is an open source license similar to ClearBSD, Analog Devices BSD, and some others. You can read about the OpenTag License on the Indigresso Wiki or on this GitHub project Wiki.

The latest version is 0.5.0. Version 2.0 is scheduled for 03.2014 release. Version 1.x is skipped because it should have been used somewhere in the 0.2 to 0.3 timeframe. Several proprietary stacks exist, forked from those versions.

[PLANNED] Version 2.1: 09.2014

• Haystack ASAPI released into mainline
• Maple (leaflabs.com) API added, plus OTA programming of sketches
• Many demo & example apps added
• MSP430 & CC430 platforms foreward-ported from 0.4.x to 2.x

[PLANNED] Version 2.0: 03.2014

• Stress-tested version of 0.5.0

[PLANNED] Version 0.5.0: 01.2014

• Hicculp Kernel introduced for Cortex-M devices
• Implementation of final-draft Mode 2 communications specification
• MPipe v2: abstract data encapsulation and crypto support
• ALP-core v2: out-of-order messaging and IPC functionality
• Improvements to internal ALP protocols
• Platforms added: STM32L
• Radios added: SPIRIT1

Version 0.4.x: 12.2012

• Exokernel architecture formalized
• Kernel scheduling is now managed entirely in hardware
• Data Link Layer and MPipe modules are rearchitected as preemptive "exotasks"
• "Idle Time" tasks are rearchitected as cooperative "kernel tasks"
• Further improvements to the radio driver, especially CSMA and flooding
• RTC-based event synchronization introduced
• True Random Number Generator (TRNG) introduced

Version 0.3.x: 5.2012 - 10.2012

• MSP430F5 platform added
• CC1101 radio added
• USB-CDC MPipe support formalized
• Support for TI PaLFI wakeup module introduced
• Cooperative multitasking formalized
• Applet architecture introduced for system callbacks & session management
• General improvements & bug fixes from 0.2.x versions

Version 0.2.x: 1.2012 - 4.2012

• Directory restructuring
• Filesystem improvements
• Kernel resembles a normal kernel
• Support for STM32 platforms
• Support for new radios (non-CC430)
• DASH7 Session management formally introduced
• DASH7 PHY/MAC support expanded
• DASH7 queries working

Version 0.1.x: 8.2011 - 12.2011

• Projects are cleaned-up for TI CCS and other build tools
• MPipe, ALP, NDEF developed for client communication
• Client-Server API developed
• Improvements to early kernel
• Improvements to radio PHY/MAC and drivers
• Improvements to Networking and Transport layers

Version 0.0.x: 1.2011 - 7.2011

• otlib developed
• Early CC430 RF driver and PHY/MAC developed
• Early platform support
• Logic testing of otlib and timing testing of platform