dlktdr / btwifimodule Goto Github PK

Good morning, I have some esp32 modules to test but the allure of the ESP01S form factor is just too much. Would it be possible to port this to an esp8266?

I was able to successfully complete the flashing without errors. The module shows up in my TX16S MKII radio running on EdgeTX built with Bluetooth enabled and the address reports from both devices on the radio hardware setup menu.

The problem is when I press "connect" in Telemetry Viewer, it says "unable to connect". The strange part is although it never officially connects, when I shut the radio off Telemetry viewer says "device disconnected".

Any help would be greatly appreciated!!!

Good day. is it possible to add support for esp32-s3?

If you discover, click a bluetooth address that doesn't allow a connection and then click discover again before waiting a while it will crash the Bluetooth on the board.

 W (224519) BT_APPL:  bta_dm_ble_scan start scan failed. status=0x3

E (224523) BT_HCI: CC evt: op=0x200c, status=0xc
E (224527) BTCLIENT: scan start failed, error status = 1

Hi!, I tryed flashed release 0.9 and Compiled target C3 super mini, and I get always this error:

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
invalid header: 0x69616620
invalid header: 0x69616620
invalid header: 0x69616620
invalid header: 0x69616620
invalid header: 0x69616620
invalid header: 0x69616620
invalid header: 0x69616620
ets Jul 29 2019 12:21:46

I´m sure I´m doing somethig wrong, what could be he problem?

I use this board:

I flash as ESP32 files from Node32s_Wroom32. Flashing finished, but in serial monitor I see this messages:

Whats wrong?

Radio type: TX16S MK2 JB edition
Version used:
- Radio FW: Edgetx 2.10.1 centurion cloud builded with bluetooth flag enabled
- ESP32 C3 Super Mini (Modified definition.h C3Mini URTS pins): cloned github repository, builded it and uploaded via VSCode
Connecting to: Xiao BLE sense HT with 2.5.1 FW

Expected beheavour: Conection between devices stays solid and uninterrupted.

Actual beheavour: Conection stablished perfctly, but after a minute or so the conection is lost and recovered instantanously. This continues to happen every 30 o 40 seconds continusly.