doubangotelecom / g729 Goto Github PK

What steps will reproduce the problem?
1. Record 5 seconds of speech data in 16bit PCM using 8KHz sampling freq.
2. Encode using binary build from coder.c application


What is the expected output? What do you see instead?
The size of 5 seconds speech record at 16 bit PCM with 8k sample freq. is 80000 
Bytes raw data file (produced 128 Kbits/sec ) which is perfect. But the bit 
stream output file generated by G729 Annex B coder application produces 59344 
bytes with VAD enabled and 82000 bytes VAD disabled which is not a 8Kbits /Sec 
rate. 

What version of the product are you using? On what operating system?
Latest SVN and in Ubuntu 12.10 

Please provide any additional information below.
I expect that g729 Annex B algorithm should produce the stream file at 8Kbits 
rate so expected file size in bytes would be 5000 bytes file size. 

What steps will reproduce the problem?
1. Compile with G729_ARM option, use the codec to communicate with other phone. 
2. The program will crash while decoding first packet, I found it stops at 
--Word16 div_s(Word16 var1, Word16 var2), e.g, the var1 and var2 always is less 
than 0.  The call path is: Post_Filter() --> agc() --> goes to  line "s = 
L_deposit_l(div_s(gain_out,gain_in));", stop at div_s(gain_out, gain_in).  As I 
print the two value, found they are less than 0, it causes program exit.   
3. If I compile it without G729_ARM option, it is ok, no problem.  

What is the expected output? What do you see instead?
--> Compare difference of the compilation option, it illustrates that the 
Assemble optimization for ARM has issues. 

What version of the product are you using? On what operating system?
---> I'm testing on HTC handset, it is ARM V7a. 

Please provide any additional information below.

What steps will reproduce the problem?
1. First time build of doubango v2.
2. Follow all the steps as exactly as in the Technical Guide June 2013 rev of 
webrtc2sip
3../autogen.sh && ./configure --with-ssl --with-srtp --with-vpx --with-amr 
--with-speex --with-speexdsp --with-gsm --with-ilbc --with-g729 --with-ffmpeg


What is the expected output? What do you see instead?
autogen and configure to be completed successfully. 

What is the gotten output?
checking for g729b/ld8a.h... yes
checking for Init_Decod_ld8a in -lg729b... (cached) no
configure: error: You requested G729 audio codec but not found...die

What version of the product are you using? On what operating system?
Doubang V2. svn co'ed today morning IST. OS is centOS 6.4 64 bit


Please provide any additional information below.
console out pasted below and configure.log attached 
=====================================================

[root@WebRTC2SIP doubango]# ./autogen.sh && ./configure --with-ssl --with-srtp 
--with-vpx --with-amr --with-speex --with-speexdsp --with-gsm --with-ilbc 
--with-g729 --with-ffmpeg

libtoolize

libtoolize: putting auxiliary files in `.'.

libtoolize: copying file `./ltmain.sh'

libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.

libtoolize: copying file `m4/libtool.m4'

libtoolize: copying file `m4/ltoptions.m4'

libtoolize: copying file `m4/ltsugar.m4'

libtoolize: copying file `m4/ltversion.m4'

libtoolize: copying file `m4/lt~obsolete.m4'

aclocal

autoheader

create NEWS, README, AUTHORS and ChangeLog

autoreconf

automake

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking for style of include used by make... GNU

checking dependency style of gcc... gcc3

checking for g++... g++

checking whether we are using the GNU C++ compiler... yes

checking whether g++ accepts -g... yes

checking dependency style of g++... gcc3

checking for a BSD-compatible install... /usr/bin/install -c

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking for a sed that does not truncate output... /bin/sed

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for fgrep... /bin/grep -F

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B

checking the name lister (/usr/bin/nm -B) interface... BSD nm

checking whether ln -s works... yes

checking the maximum length of command line arguments... 1966080

checking whether the shell understands some XSI constructs... yes

checking whether the shell understands "+="... yes

checking for /usr/bin/ld option to reload object files... -r

checking for objdump... objdump

checking how to recognize dependent libraries... pass_all

checking for ar... ar

checking for strip... strip

checking for ranlib... ranlib

checking command to parse /usr/bin/nm -B output from gcc object... ok

checking how to run the C preprocessor... gcc -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking for dlfcn.h... yes

checking whether we are using the GNU C++ compiler... (cached) yes

checking whether g++ accepts -g... (cached) yes

checking dependency style of g++... (cached) gcc3

checking how to run the C++ preprocessor... g++ -E

checking for objdir... .libs

checking if gcc supports -fno-rtti -fno-exceptions... no

checking for gcc option to produce PIC... -fPIC -DPIC

checking if gcc PIC flag -fPIC -DPIC works... yes

checking if gcc static flag -static works... no

checking if gcc supports -c -o file.o... yes

checking if gcc supports -c -o file.o... (cached) yes

checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared 
libraries... yes

checking whether -lc should be explicitly linked in... no

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking whether stripping libraries is possible... yes

checking if libtool supports shared libraries... yes

checking whether to build shared libraries... yes

checking whether to build static libraries... yes

checking for ld used by g++... /usr/bin/ld -m elf_x86_64

checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes

checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared 
libraries... yes

checking for g++ option to produce PIC... -fPIC -DPIC

checking if g++ PIC flag -fPIC -DPIC works... yes

checking if g++ static flag -static works... no

checking if g++ supports -c -o file.o... yes

checking if g++ supports -c -o file.o... (cached) yes

checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared 
libraries... yes

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking for a sed that does not truncate output... (cached) /bin/sed

checking whether make sets $(MAKE)... (cached) yes

checking for pkg-config... /usr/bin/pkg-config

checking pkg-config is at least version 0.9.0... yes

checking whether to enable debugging... checking for stricmp... no

checking for strnicmp... no

checking for poll... yes

checking net/if_types.h usability... no

checking net/if_types.h presence... no

checking for net/if_types.h... no

checking net/if_dl.h usability... no

checking net/if_dl.h presence... no

checking for net/if_dl.h... no

checking poll.h usability... yes

checking poll.h presence... yes
checking for poll.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for getifaddrs... yes
checking ifaddrs.h usability... yes
checking ifaddrs.h presence... yes
checking for ifaddrs.h... yes
checking for net/if_dl.h... (cached) no
checking for net/if_types.h... (cached) no
checking netpacket/packet.h usability... yes
checking netpacket/packet.h presence... yes
checking for netpacket/packet.h... yes
checking net/route.h usability... yes
checking net/route.h presence... yes
checking for net/route.h... yes
checking for struct rt_metrics... no
checking for struct sockaddr_dl... no
checking dns.h usability... no
checking dns.h presence... no
checking for dns.h... no
checking for dns_search in -lresolv... no
checking for clock_gettime in -lrt... yes
checking for struct sockaddr_storage.ss_len... no
checking for struct sockaddr.sa_len... no
checking srtp/srtp.h usability... yes
checking srtp/srtp.h presence... yes
checking for srtp/srtp.h... yes
checking for srtp_create in -lsrtp... yes
checking for append_salt_to_key in -lsrtp... yes
checking for srtp_profile_get_master_key_length in -lsrtp... yes
checking for srtp_profile_get_master_salt_length in -lsrtp... yes
checking openssl/ssl.h usability... yes
checking openssl/ssl.h presence... yes
checking for openssl/ssl.h... yes
checking for SSL_library_init in -lssl... yes
checking for BN_init in -lcrypto... yes
checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes
checking for DTLSv1_method in -lssl... yes
checking libavutil/avutil.h usability... yes
checking libavutil/avutil.h presence... yes
checking for libavutil/avutil.h... yes
checking for av_gettime in -lavutil... yes
checking libswscale/swscale.h usability... yes
checking libswscale/swscale.h presence... yes
checking for libswscale/swscale.h... yes
checking for sws_scale in -lswscale... yes
checking libavcodec/avcodec.h usability... yes
checking libavcodec/avcodec.h presence... yes
checking for libavcodec/avcodec.h... yes
checking for avcodec_find_encoder in -lavcodec... yes
checking vpx/vpx_encoder.h usability... yes
checking vpx/vpx_encoder.h presence... yes
checking for vpx/vpx_encoder.h... yes
checking for vpx_codec_encode in -lvpx... yes
checking vpx/vpx_decoder.h usability... yes
checking vpx/vpx_decoder.h presence... yes
checking for vpx/vpx_decoder.h... yes
checking for vpx_codec_encode in -lvpx... (cached) yes
checking libyuv/libyuv.h usability... no
checking libyuv/libyuv.h presence... no
checking for libyuv/libyuv.h... no
checking opencore-amrnb/interf_dec.h usability... yes
checking opencore-amrnb/interf_dec.h presence... yes
checking for opencore-amrnb/interf_dec.h... yes
checking for Encoder_Interface_init in -lopencore-amrnb... yes
checking opencore-amrnb/interf_enc.h usability... yes
checking opencore-amrnb/interf_enc.h presence... yes
checking for opencore-amrnb/interf_enc.h... yes
checking for Encoder_Interface_init in -lopencore-amrnb... (cached) yes
checking opus/opus.h usability... yes
checking opus/opus.h presence... yes
checking for opus/opus.h... yes
checking for opus_decoder_create in -lopus... yes
checking speex/speex.h usability... yes
checking speex/speex.h presence... yes
checking for speex/speex.h... yes
checking for speex_decode_int in -lspeex... yes
checking speex/speex_preprocess.h usability... yes
checking speex/speex_preprocess.h presence... yes
checking for speex/speex_preprocess.h... yes
checking for speex_preprocess_state_init in -lspeexdsp... yes
checking speex/speex_jitter.h usability... yes
checking speex/speex_jitter.h presence... yes
checking for speex/speex_jitter.h... yes
checking for jitter_buffer_init in -lspeexdsp... yes
checking speex/speex_resampler.h usability... yes
checking speex/speex_resampler.h presence... yes
checking for speex/speex_resampler.h... yes
checking for speex_resampler_init in -lspeexdsp... yes
checking speex/speex_echo.h usability... yes
checking speex/speex_echo.h presence... yes
checking for speex/speex_echo.h... yes
checking for speex_echo_playback in -lspeexdsp... yes
checking gsm.h usability... yes
checking gsm.h presence... yes
checking for gsm.h... yes
checking for gsm_create in -lgsm... yes
checking for g729b/typedef.h... yes
checking for Init_Decod_ld8a in -lg729b... no
checking for g729b/ld8a.h... yes
checking for Init_Decod_ld8a in -lg729b... (cached) no
configure: error: You requested G729 audio codec but not found...die
================================================================

What steps will reproduce the problem?
1. Compile/install g729 (./autogen.sh -> ./configure -> make -> make install)
2. Copy libg729b.so.0.0.0 to asterisk module path renaming it to codec_g729b
3. Load module on asterisk-cli (module load codec_g729b)

What is the expected output? What do you see instead?
Expected: Load Module Success
Got:

raspbx*CLI> module load codec_g729b.so
Unable to load module codec_g729b.so
Command 'module load codec_g729b.so ' failed.
[2013-05-19 14:59:02] WARNING[11050]: loader.c:423 load_dynamic_module: Error 
loading module 'codec_g729b.so': /usr/lib/asterisk/modules/codec_g729b.so: 
undefined symbol: bad_lsf
[2013-05-19 14:59:02] WARNING[11050]: loader.c:902 load_resource: Module 
'codec_g729b.so' could not be loaded.

What version of the product are you using? On what operating system?
Using branch v8
OS: Debian weezy (Raspian) - Linux raspbx 3.6.11+ #408 PREEMPT Wed Apr 10 
20:33:39 BST 2013 armv6l GNU/Linux

Please provide any additional information below.

I'm running asterisk on raspberry pi.
Does it need to be compiled with custom parameters to work with my armv6l?