• Raspberry Pi (I recommend a Pi Zero)
• E-Paper screen
• Picture frame suitable for the screen

Use the requirements.txt file to install the required python dependencies

In the terminal run the following commands:

wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.60.tar.gz
tar zxvf bcm2835-1.60.tar.gz
cd bcm2835-1.60/
sudo ./configure
sudo make
sudo make check
sudo make install
sudo apt-get install wiringpi
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
sudo apt-get update
sudo pip install RPi.GPIO
cd
wget https://github.com/waveshare/e-Paper/archive/refs/heads/master.tar.gz
tar zxvf master.tar.gz
cd e-Paper-master/RaspberryPi_JetsonNano/python/examples

Run the example file that matches your e-ink screen