Are schematics available for these? Also, are the SCH and BRD files available for these?

Thanks for your work on the multiboards!

Saw the flasher you have and it is super old code. Take a peek at this and see if it works better for you. <3

Tried different SD cards (one is working fine on Cardputer with Marauder).

Any idea what could be wrong?

I'd like to make your board, and I'm not good with Surface mount devices. If you have a Bill of Materials it would be useful when I have it assembled - using a company like JLCPCB, who will build the board for me.

Hi, I was wondering if you could get me the specs for the cardreader you used to design with. most I find online are either 7 or 9 pin but this one wants an 8 pin right?

Hi! Can someone share BOM and CPL files with matcing ones from the fresh database https://jlcpcb.com/parts?

Sketch uses 732270 bytes (37%) of program storage space. Maximum is 1966080 bytes.
Global variables use 40396 bytes (12%) of dynamic memory, leaving 287284 bytes for local variables. Maximum is 327680 bytes.
esptool.py v4.5.1
Serial port /dev/cu.usbmodemflip_Orc3on31
Connecting......................................

A fatal error occurred: Failed to connect to ESP32-S2: No serial data received.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html
Failed uploading: uploading error: exit status 2

I like your work very much. Can you provide me with the bom for Multi Board v2 Thank you.

Hey,

maybe it would be a great idea to add a secondary CC1101 to flipper.
this would make the flipper to a realy bad system because of the possibility
to bypass access systems with rolling code systems by sending out a blocking
signal while receiving the original signal - by pressing the key the second time send out
the first signal (then flipper has the next valid code to open)

am trying to flash the esp32 the board doesnt have usb it seems that i cannot enter the flash mod the board keep saying enter reflash mode

Just throwing an idea. Flipper Weatherstation. simple board with temp and humidity sensor, pressure sensor and maybe windspeed. something like that.

Cannot get Evil Portal to work with latest flash. Does this board support it? I have the V1 Multiboard

Hi, I was wondering if you could get me the specs for the dipswitch? I suppose it requires pretty specific measurements since it's packed against the nrf24 board.

I am tired already, any idea how to update esp32 solo with new version of Marauder (13.7), i can"t find work bin file, when try compile with Arduino IDE i have only errors.
Any Idea?

I followed this tutorial on how to capture packages via Marauder app:
https://www.youtube.com/watch?v=subLBPJ3IxU&t=489s

I have enabled save .pcap to SD and it can successfully write .pcap and files on the SD card and the log files can be saved, however, the written .pcap files are always at 0 bytes

Is there any fix?

I bought the device from a reseller who flashes the multiboard their own and do not know how to flash the multiboard v2 which does not have any USB port.