dwaaan / pyrit Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/pyrit
Automatically exported from code.google.com/p/pyrit
jacob@laptop:~/svn/pyrit_svn$ svn update
At revision 160.
jacob@laptop:~/svn/pyrit_svn$ cd pyrit/
jacob@laptop:~/svn/pyrit_svn/pyrit$ python setup.py build
running build
running build_py
running build_ext
running build_scripts
jacob@laptop:~/svn/pyrit_svn/pyrit$ sudo python setup.py install
running install
running build
running build_py
running build_ext
running build_scripts
running install_lib
writing byte-compilation script '/tmp/tmpQuMAay.py'
/usr/bin/python -O /tmp/tmpQuMAay.py
removing /tmp/tmpQuMAay.py
running install_scripts
changing mode of /usr/local/bin/pyrit to 755
running install_egg_info
Removing /usr/local/lib/python2.6/dist-packages/Pyrit-0.2.4.egg-info
Writing /usr/local/lib/python2.6/dist-packages/Pyrit-0.2.4.egg-info
jacob@laptop:~/svn/pyrit_svn/pyrit$ cd ..
jacob@laptop:~/svn/pyrit_svn$ cd cpyrit_cuda/
jacob@laptop:~/svn/pyrit_svn/cpyrit_cuda$ python setup.py build
running build
running build_ext
Skipping rebuild of Nvidia CUDA kernel ...
Building modules...
jacob@laptop:~/svn/pyrit_svn/cpyrit_cuda$ sudo python setup.py install
running install
running build
running build_ext
Skipping rebuild of Nvidia CUDA kernel ...
Building modules...
running install_lib
running install_egg_info
Removing /usr/local/lib/python2.6/dist-packages/CPyrit_CUDA-0.2.4.egg-info
Writing /usr/local/lib/python2.6/dist-packages/CPyrit_CUDA-0.2.4.egg-info
jacob@laptop:~/svn/pyrit_svn/cpyrit_cuda$ pyrit -r
/home/jacob/sony/sony-01.cap-e SonyCenter attack_batch
Pyrit 0.2.4-dev (svn r151) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Parsing file '/home/jacob/sony/sony-01.cap'... 4831 packets (4831
802.11-packets), 1 APs
Picked Access-Point 00:11:50:b9:66:1b automatically...
WARNING: Version mismatch between main module ('0.2.4-dev (svn r151)') and
CPyrit-CUDA ('0.2.4-dev (svn r159)')
Attacking handshake with Station 00:21:5d:2b:8b:e0...
Segmentation fault (core dumped)
jacob@laptop:~/svn/pyrit_svn/cpyrit_cuda$
I can send you the core dump if you like..
Original issue reported on code.google.com by [email protected]
on 10 Aug 2009 at 4:37
What steps will reproduce the problem?
1. ... when a network-core is involved
2.
3. the benchmark is running on both computers but never comes to an end.
What is the expected output? What do you see instead?
expected to see a benchmark-result
instead:
pyrit list_cores
Pyrit 0.2.3-dev (svn r120) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
The following cores seem available...
#1: 'CPU-Core (SSE2)'
#2: 'CPU-Core (SSE2)'
#3: 'CPU-Core (SSE2)'
#4: 'CPU-Core (SSE2)'
#5: 'Network-Core @192.168.123.32'
pyrit benchmark
Pyrit 0.2.3-dev (svn r120) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
Running benchmark for at least 60 seconds...
after several minutes pressed Ctrl-C; i get
^CTraceback (most recent call last):
File "/usr/local/bin/pyrit", line 710, in <module>
Pyrit_CLI().init()
File "/usr/local/bin/pyrit", line 97, in init
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/local/bin/pyrit", line 423, in benchmark
for r in cp:
File "/usr/local/lib/python2.6/dist-packages/cpyrit.py", line 344, in
__iter__
r = self.dequeue(block=True)
File "/usr/local/lib/python2.6/dist-packages/cpyrit.py", line 401, in dequeue
self.cv.wait(3)
File "/usr/lib/python2.6/threading.py", line 256, in wait
_sleep(delay)
KeyboardInterrupt
What version of the product are you using? On what operating system?
pyrit rev120 on Ubuntu 9.04-64bit Phenom II 920, ATI 4850
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 13 Jul 2009 at 11:20
I'm using Pyrit with ATi Stream and when I type:
pyrit list_cores
the output is:
festor@sniper-win:~$ pyrit list_cores
Pyrit 0.2.3-dev (C) 2008, 2009 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Traceback (most recent call last):
File "/usr/bin/pyrit", line 1092, in <module>
Pyrit_CLI().init()
File "/usr/bin/pyrit", line 191, in init
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/bin/pyrit", line 241, in list_cores
cp = cpyrit.CPyrit()
File "/usr/lib/python2.6/dist-packages/cpyrit.py", line 274, in __init__
self.cores.append(StreamCore(queue=self, dev_idx=dev_idx))
File "/usr/lib/python2.6/dist-packages/cpyrit.py", line 153, in __init__
self.name = "ATI-Stream device %i" % dev_idx+1
TypeError: cannot concatenate 'str' and 'int' objects
I know that I am using an unstable version of Pyrite but anyway I wanted to
report this problem. If you need more info let me know.
Original issue reported on code.google.com by [email protected]
on 4 Jul 2009 at 11:09
Pyrit only displays 8 cpus/cores:
I have a Core i7 which has 8 cpus/cores, I also have a 8800GTX which
displays as 1 cpu/core, so a total of 9 cpus/cores.
When running list_cores/benchmark etc all the cores are used (I can see
this in System Monitor) but the results only displays 8 items.
Original issue reported on code.google.com by [email protected]
on 20 Jul 2009 at 2:35
cpyrit_cuda Dawmac$ python setup.py build
running build
running build_ext
Skipping rebuild of Nvidia CUDA kernel ...
Building modules...
building 'cpyrit._cpyrit_cuda' extension
gcc -Wl,-F. -bundle -undefined dynamic_lookup -arch i386 -arch ppc
build/temp.macosx-
10.5-i386-2.5/_cpyrit_cuda.o -lssl -lcuda -lz -o build/lib.macosx-10.5-i386-
2.5/cpyrit/_cpyrit_cuda.so
ld: library not found for -lcuda
collect2: ld returned 1 exit status
ld: library not found for -lcuda
collect2: ld returned 1 exit status
lipo: can't open input file: /var/folders/mh/mhoklewzFbqF2lXtPmUvNk+++TI/-Tmp-
//ccxQBph5.out (No such file or directory)
error: command 'gcc' failed with exit status 1
have i miss some-think silly out i have install then Xcode
here is my spec
Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP53.00AC.B03
SMC Version (system): 1.48f2
NVIDIA GeForce 9600M GT:
NVIDIA GeForce 9400M:
Original issue reported on code.google.com by [email protected]
on 6 Sep 2009 at 6:15
SSE2 is currently disabled for __APPLE__ as XCode's ld seems to fail with
producing relocatable code.
Somebody fix that :\
Original issue reported on code.google.com by [email protected]
on 10 Jul 2009 at 6:55
What steps will reproduce the problem?
1. pyrit -f wordlist.txt import_passwords
What version of the product are you using? On what operating system?
svn 115 with Fedora 11 x86_64
Please provide any additional information below.
The word list I am using is 24gb big with approximately 2,400,000,000 lines
in it. It has taken at least 20 hours to import 2,283,200,000 lines. At
that rate it has done, 31,711 lines a second. The code seems to be single
threaded, in that I only see 99% cpu usage in top instead of 199%.
It is running on a Core2Duo 1.86ghz with 4gb of DDR2 memory. Not the
fastest thing in the world. The storage is a linux software raid5 array of
four 250gb hard drives. The load is 1.04, so nothing else is eating a
significant amount of cpu.
I know this only has to be done once, but 20+ hours of overhead to use
batchprocess sucks. It could easily be a lot worse if I used an even bigger
wordlist. If I added all US telephone numbers, 10 digit numbers, it would
add another 40gb.
The code seems like a candidate for a C library.
Original issue reported on code.google.com by [email protected]
on 12 Jul 2009 at 7:15
What steps will reproduce the problem?
1. Start backtrack 4 final candidate.
2. Install cpyrit-cuda (apt-get install cpyrit-cuda)
This will also install the nvidia-driver
3. execute:
modprobe nvidia
depmod -a
X -configure
cp xorg.conf.new /etc/X11/xorg.conf
startx
4. When X starts, a display of Nvidia beta is clearly visible.
5. When I run pyrit list_cores, I can only see my CPU core, even though
that CUDA should be working with my nvidia 8600M GT.
What is the expected output? What do you see instead?
Expected: to see both my CPU and VGA card listed when I run pyrit_list
cores. Instead I only see my cpu.
What version of the product are you using? On what operating system?
OS: Backtrack 4 final candidate.
Pyrit: 0.2.3
Original issue reported on code.google.com by [email protected]
on 25 Sep 2009 at 1:23
jacob@laptop:~/wordlist$ pyrit -f lower import_passwords
Pyrit 0.2.4-dev (svn r160) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
296809 lines read. Flushing buffers...
All done.
jacob@laptop:~/wordlist$ pyrit eval
Pyrit 0.2.4-dev (svn r160) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Passwords available: 111717557
ESSID 'SonyCenter': 17793682 (15.93%)
ESSID 'test': 230580 (0.21%)
jacob@laptop:~/wordlist$
jacob@laptop:~/wordlist$ pyrit -e SonyCenter batch >> this make my laptop
too reboot.
Maybe its the heat from the cpu/gpu, but my box have a big cooler fan.. but
im not sure.. i cant make a dump file on that i think.
jacob@laptop:~/wordlist$ uname -a
Linux laptop 2.6.28-14-generic #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009
x86_64 GNU/Linux
jacob@laptop:~/wordlist$
PS: i have no plans in using the hatelist, its way too big for my ~1800
pmk's. Its just a test.
Let me know if you need some more info..
Thanks
Original issue reported on code.google.com by [email protected]
on 10 Aug 2009 at 9:41
What steps will reproduce the problem?
jacob@Lappy:~$ pyrit -e SonyCenter batch
Pyrit 0.2.5-dev (svn r170) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Working on ESSID 'SonyCenter'
^Cocessed 3/7444 workunits so far (0.0%); 1207 PMKs per second.
Interrupted...
jacob@Lappy:~$ pyrit -e SonyCenter batch
Pyrit 0.2.5-dev (svn r170) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Working on ESSID 'SonyCenter'
^Cocessed 1/7444 workunits so far (0.0%); 1618 PMKs per second.
Interrupted...
jacob@Lappy:~$
What is the expected output? What do you see instead?
1/7441
What version of the product are you using? On what operating system?
R 170
Please provide any additional information below.
If we run all night, and want too use pc in the morning, and not yet finish
Original issue reported on code.google.com by [email protected]
on 4 Sep 2009 at 9:24
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
similar or better k/s. Instead, performance decrease.
What version of the product are you using? On what operating system?
Please provide any additional information below.
Hardware: CPU Phenom 2 4 [email protected], NVIDIA 9800GTX+
Pyrit benchmark in BackTrak4 live (prefinal live) reports 1000 k/s on CPU 4
core (in that version there was not support for SSE2) and 7440k/s for GPU.
(I dont know version of pyrit in BT4 but for sure is before v112)
2 days ago, I recompiled pyrit (following these instructions
http://code.google.com/p/pyrit/wiki/Installation) on ubuntu 9.04 at 64bit
(pyrit 0.2.3, CUDA driver 190.18, cudatoolkit 2.3) and pyrit benchmark is
about 640 k/s for each CPU core (3 core running, core #4 dedicated to serve
GPU) and the GPU report about 6900-7000 k/s.
Why now GPU loose about 450-500K/s if compared with old version of pyrit
present on BackTrack4? I tried to not start X server in ubuntu and test
pyrit from command line, but it never reach 7440 k/s.
So, what is wrong?
- Maybe there are some flag to set during compilation to use GPU in
optimized way?
- Maybe pyrit in BT4 runs better because it is at 32bits?
- Maybe because BT4 is a more "light" OS than Ubuntu?
Original issue reported on code.google.com by [email protected]
on 6 Aug 2009 at 12:24
What steps will reproduce the problem?
0: update svn 174/backtrack updatet
1. exit gdm/pure console mode
2.pyrit benchmark/pyrit batch
3. pyrit eval/import_passwords/create_essid is NOT affectet
What is the expected output? What do you see instead?
It makes a blank/black screen when the command finish, then i have to hit
enter one time so the shell is back, but the result from pyrit is still
black-screen'd.
What version of the product are you using? On what operating system?
174
Please provide any additional information below.
Acully, im not even sure pyrit runs better in console mode...
Original issue reported on code.google.com by [email protected]
on 21 Sep 2009 at 12:32
What steps will reproduce the problem?
pyrit batch
What is the expected output? What do you see instead?
jacob@Lappy:~$ pyrit list_cores
Pyrit 0.2.5-dev (svn r170) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The following cores seem available...
#1: 'CUDA-Device #1 'GeForce 8700M GT''
#2: 'CPU-Core (SSE2)'
#3: 'CPU-Core (SSE2)'
jacob@Lappy:~$
What version of the product are you using? On what operating system?
R 170
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Sep 2009 at 9:26
Hi,
I am running MacOSX 10.5.8 Intel. When trying to build pyrit from svn I get
some errors. If you need more information please tellme.
thanks
--- 8< --- 8< --- 8< --- 8< --- 8< --- 8< --- 8< --- 8< --- 8<
python setup.py build
outputs
gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk
-fno-strict-aliasing -Wno-long-double -no-cpp-precomp -mno-fused-madd
-fno-common -dynamic -DNDEBUG -g -O3
-I/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c
cpyrit/_cpyrit_cpu.c -o build/temp.macosx-10.3-fat-2.5/cpyrit/_cpyrit_cpu.o
cpyrit/_cpyrit_cpu.c: In function 'segv_action':
cpyrit/_cpyrit_cpu.c:116: error: 'struct mcontext' has no member named '__ss'
lipo: can't figure out the architecture type of:
/var/folders/Ou/OuOVBHe6GxW5e4BcC50JYk+++TI/-Tmp-//ccfX3Ona.out
error: command 'gcc' failed with exit status 1
Original issue reported on code.google.com by [email protected]
on 6 Sep 2009 at 5:27
What steps will reproduce the problem?
1. Pull r165 from svn.
2. Build and install the pyrit & cpyrit_cuda modules.
3. Run: pyrit list_cores and pyrit benchmark
What is the expected output? What do you see instead?
Expect to see pyrit identify my GTX-260 card, but it does not. Instead, it
displays both AMD cores of the CPU and error message about /dev/nvidiactl:
Pyrit 0.2.4-dev (svn r165) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
NVIDIA: could not open the device file /dev/nvidiactl (No such file or
directory).
Running benchmark for about 1 seconds... /
Computed 481.71 PMKs/s total.
#1: 'CPU-Core (SSE2)': 247.8 PMKs/s (Occ. 94.6%; RTT 3.0)
#2: 'CPU-Core (SSE2)': 247.4 PMKs/s (Occ. 99.9%; RTT 2.9)
What version of the product are you using? On what operating system?
BT4Pre-Final
r165 from svn
Please provide any additional information below.
This had been working in r159.
And it is true that there is no /dev/nvidiactl entry in my /dev directory.
Don't know what's going on here. Can you help?
Thanks in advance.
Original issue reported on code.google.com by [email protected]
on 14 Aug 2009 at 7:14
What steps will reproduce the problem?
1.Running pyrit on non-sse2 athlon processor - XP2100 and XP2700
What is the expected output? What do you see instead?
Should see selftest results instead I get the following when running pyrit
selftest on an AMD Athlon XP 2100+ & 2700+ CPU
Cores incorporated in the test:
#1: 'CPU-Core (SSE2)'
Running selftest for at least 60 seconds...
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.5/threading.py", line 486, in __bootstrap_inner
self.run()
File "/usr/lib/python2.5/site-packages/cpyrit.py", line 90, in run
self._testComputeFunction(101)
File "/usr/lib/python2.5/site-packages/cpyrit.py", line 87, in
_testComputeFunction
raise ValueError, "Test-vector does not result in correct PMK."
ValueError: Test-vector does not result in correct PMK.
Traceback (most recent call last):
File "/usr/bin/pyrit", line 542, in <module>
Pyrit_CLI().init()
File "/usr/bin/pyrit", line 93, in init
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/bin/pyrit", line 455, in selftest
solvedPMKs = cp.dequeue(block=False)
File "/usr/lib/python2.5/site-packages/cpyrit.py", line 412, in dequeue
self._check_cores()
File "/usr/lib/python2.5/site-packages/cpyrit.py", line 333, in _check_cores
raise SystemError, "The core '%s' has died unexpectedly." % core
SystemError: The core 'CPU-Core (SSE2)' has died unexpectedly.
What version of the product are you using? On what operating system?
Pyrit-0.2.3 latest & latest SVN source
Please provide any additional information below.
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2700+
stepping : 1
cpu MHz : 2166.414
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up
bogomips : 4332.82
clflush size : 32
power management: ts
Original issue reported on code.google.com by [email protected]
on 1 Aug 2009 at 7:08
What steps will reproduce the problem?
1. pyrit -e test -f darkc0de.lst passthrough | cowpatty -d - -r
cap_files/wpa.cap -s test
(using aircracks test wpa capture, although the issue happens with other
captures)
What is the expected output? What do you see instead? The program shouls
exit and tell me whether or not it found the key. Instead it gets to key
no. 990000: vulneravisse and hangs indefinitly. top shows the program has
exited however the output is never written to the screen.
What version of the product are you using? On what operating system? Gentoo
Linux pyrit rev 108
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 5 Jul 2009 at 5:10
Specs: r151, python 2.6.2, 2.6.30-gentoo-r4, nvidia 185.18.31, cuda 2.2
simply compiling and installing is good, running pyrit on the modules
version check it say that the main module is r148, wrong.
i've completely purged sources and install path and blobspace of the
bundle, but warning occurs.
then;
how about the ipv6 support in python, which function is needed? i've not
for now, seems optional
how about the tpcdump, which function is needed for? i've not for now,
seems optional
Original issue reported on code.google.com by masterzorag
on 7 Aug 2009 at 11:31
Here is a sample pcap file request (as requested by author of project).
Hope this helps.
Andy
Original issue reported on code.google.com by andrewmslezak
on 8 Aug 2009 at 11:10
jacob@laptop:~$ pyrit -r /home/jacob/sony/sony-01.cap -e SonyCenter
attack_batch
Pyrit 0.2.4-dev (svn r151) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Parsing file '/home/jacob/sony/sony-01.cap'... 4831 packets (4831
802.11-packets), 1 APs
Picked Access-Point 00:11:50:b9:66:1b automatically...
Attacking handshake with Station 00:21:5d:2b:8b:e0...
Exception in thread CUDA-Device #1 'GeForce 8700M GT':
Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 525, in __bootstrap_inner
self.run()
File "/usr/local/lib/python2.6/dist-packages/cpyrit/cpyrit.py", line 78,
in run
res = self.solve(essid, pwlist)
ValueError: All items must be strings between 8 and 63 characters
Computed 1772.89 PMKs/s total.
#1: 'CUDA-Device #1 'GeForce 8700M GT'': 1658.6 PMKs/s (Occ. 95.0%; RTT 2.5)
#2: 'CPU-Core (SSE2)': 419.9 PMKs/s (Occ. 46.9%; RTT 1.2)
Traceback (most recent call last):
File "/usr/local/bin/pyrit", line 6, in <module>
pyrit_cli.Pyrit_CLI().initFromArgv()
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 113, in
initFromArgv
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 168, in
new_f
f(*args, **kwds)
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 157, in
new_f
f(*args, **kwds)
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 572, in
attack_batch
for results in self._databaseIterator(self.options.essid, cp,
yieldOldResults=True, yieldNewResults=True):
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 426, in
_databaseIterator
cp.enqueue(essid, passwords)
File "/usr/local/lib/python2.6/dist-packages/cpyrit/cpyrit.py", line 303,
in enqueue
self._check_cores()
File "/usr/local/lib/python2.6/dist-packages/cpyrit/cpyrit.py", line 246,
in _check_cores
raise SystemError, "The core '%s' has died unexpectedly." % core
SystemError: The core 'CUDA-Device #1 'GeForce 8700M GT'' has died
unexpectedly.
jacob@laptop:~$
What version of the product are you using? On what operating system?
At revision 157.
Original issue reported on code.google.com by [email protected]
on 9 Aug 2009 at 9:47
What steps will reproduce the problem?
1. time pyrit -f 8english.txt -e linksys passthrough | cowpatty -d - -s
linksys -r /usr/share/doc/cowpatty-4.3/wpapsk-linksys.dump
What is the expected output? What do you see instead?
No warnings
/usr/bin/pyrit:106: DeprecationWarning: BaseException.message has been
deprecated as of Python 2.6
raise type(e)(e.message)
What version of the product are you using? On what operating system?
SVN 108 with Fedora 11 x86_64 Linux
Please provide any additional information below.
python-2.6-9.fc11.x86_64
Original issue reported on code.google.com by [email protected]
on 5 Jul 2009 at 4:33
./pyrit_cli.py benchmark
Benchmarking cores 'Standard CPU', 'Nvidia CUDA'
Testing GPU core 'Nvidia CUDA'...
10000 PMKs in 28.33 seconds: 352.98 PMKs/s
GPU performance: 71.30 PMKs/s
CPU performance: 299.21 PMKs/s
Result hash: d3df945e80cc6a745c2c47ca174cb3c9 FAILED
[joaander@teslahoomd pyrit]$ ./pyrit_cli.py benchmark
Benchmarking cores 'Standard CPU', 'Nvidia CUDA'
Testing GPU core 'Nvidia CUDA'...
10000 PMKs in 28.24 seconds: 354.09 PMKs/s
GPU performance: 35.41 PMKs/s
CPU performance: 406.27 PMKs/s
Result hash: e8c4637cf23ec88f2e50239d29546770 FAILED
[joaander@teslahoomd pyrit]$ ./pyrit_cli.py benchmark
Benchmarking cores 'Standard CPU', 'Nvidia CUDA'
Testing GPU core 'Nvidia CUDA'...
10000 PMKs in 32.57 seconds: 307.04 PMKs/s
GPU performance: 61.42 PMKs/s
CPU performance: 355.46 PMKs/s
Result hash: 33d0bc12d9bd672f9d2fec1ab1867d77 FAILED
Original issue reported on code.google.com by [email protected]
on 13 Sep 2008 at 1:05
Hi,
I'm using 0.2.3-dev r109
Renaming the /root/.pyrit/hosts directory lets Pyrit to create a hosts file
and solves this issue.
This is the error I get.
Traceback (most recent call last):
File "/usr/local/bin/pyrit", line 1092, in <module>
Pyrit_CLI().init()
File "/usr/local/bin/pyrit", line 193, in init
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/local/bin/pyrit", line 597, in verify
cp = cpyrit.CPyrit()
File "/usr/local/lib/python2.6/dist-packages/cpyrit.py", line 273, in
__init__
for host in open(hostfile, "r"):
IOError: [Errno 21] Is a directory: '/root/.pyrit/hosts'
Thanks,
Max
Original issue reported on code.google.com by maximd%[email protected]
on 5 Jul 2009 at 9:35
What steps will reproduce the problem?
jacob@Lappy:~$ pyrit list_cores
Pyrit 0.2.5-dev (svn r170) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The following cores seem available...
#1: 'CUDA-Device #1 'GeForce 8700M GT''
#2: 'CPU-Core (SSE2)'
jacob@Lappy:~$ pyrit -e SonyCenter eval
Pyrit 0.2.5-dev (svn r170) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Traceback (most recent call last):
File "/usr/local/bin/pyrit", line 6, in <module>
pyrit_cli.Pyrit_CLI().initFromArgv()
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 113, in
initFromArgv
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 271, in
eval_results
for i, (key, passwords) in enumerate(self.storage.passwords.iteritems()):
File "/usr/local/lib/python2.6/dist-packages/cpyrit/util.py", line 556,
in iteritems
yield (key, self[key])
File "/usr/local/lib/python2.6/dist-packages/cpyrit/util.py", line 528,
in __getitem__
raise IOError, "Digest check failed for %s" % filename
IOError: Digest check failed for
/home/jacob/.pyrit/blobspace/password/C4/0a35ca7197aa9bd3a3ff3975f7fd82bc.pw
jacob@Lappy:~$
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Sep 2009 at 9:53
What steps will reproduce the problem?
1. Perform 'svn update' to r156, then build and install the pyrit and
cpyrit modules.
2. Enter ~/pyrit_svn/test directory
3. pyrit -r wpapsk-linksys.dump -f linksys.dump strip
4. Observe new file linksys.dump
5. Try to open linksys.dump with Wireshark or aircrack-ng
6. Observe neither application can interpret the stripped file's contents.
What is the expected output? What do you see instead?
Expected that a tight .dump file is produced.
What version of the product are you using? On what operating system?
r156 running on BT4Pre-Final with Scapy 2.0.1 installed, no other changes.
Please provide any additional information below.
This is a terrific feature, just would like to see it working.
Thanks for all your hard work on pyrit.
Original issue reported on code.google.com by [email protected]
on 9 Aug 2009 at 4:20
What steps will reproduce the problem?
[root@linuxborg pyrit-read-only]# pyrit -e NETGEAR verify
Pyrit 0.2.5-dev (svn r174) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Verifying ESSID 'NETGEAR'
Traceback (most recent call last):
File "/usr/bin/pyrit", line 6, in <module>
pyrit_cli.Pyrit_CLI().initFromArgv()
File "/usr/lib64/python2.5/site-packages/pyrit_cli.py", line 121, in
initFromArgv
self.print_help)()
File "/usr/lib64/python2.5/site-packages/pyrit_cli.py", line 719, in verify
self.tell("\nVerified %i PMKs with %.2f PMKs/s." % (totalResCount,
totalResCount / (time.time() - startTime)))
ZeroDivisionError: float division
What is the expected output? What do you see instead? See above.
What version of the product are you using? On what operating system?
svn r174, Python 2.5, Fedora Core 10, Nvidia 9800 GTX+
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 25 Sep 2009 at 2:42
festor@sniper-win:~$ pyrit -e BonitoBlanco -f Babeldoc export_hashdb
Pyrit 0.2.3 (C) 2008, 2009 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Writing passwords...
Wrote 473987 lines...
Writing ESSIDs and results...
Writing 'BonitoBlanco'...
There was an error while exporting. The database has not been modified...
Traceback (most recent call last):
File "/usr/bin/pyrit", line 710, in <module>
Pyrit_CLI().init()
File "/usr/bin/pyrit", line 97, in init
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/bin/pyrit", line 329, in export_hashdb
((essid_id, buffer(pmk), pw) for pw, pmk in results.iteritems()))
AttributeError: 'tuple' object has no attribute 'iteritems'
Ubuntu 9.04
Python 2.6
Pyrit 0.2.3-dev rev 120
Original issue reported on code.google.com by [email protected]
on 18 Jul 2009 at 9:31
What steps will reproduce the problem?
1. cd pyrit
2. ./setup build
What is the expected output? What do you see instead?
No warnings about cuda for _cpyrit_cpu.so.
_cpyrit/_cpyrit_cpu.c:41: warning: ‘CUDADevice_type’ defined but not used
What version of the product are you using? On what operating system?
SVN 108 with Fedora 11 x86_64 Linux
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 5 Jul 2009 at 4:35
I have compiled pyrit from svn yesterday, but it can't find cpyrit-cuda
for troubleshooting I did:
# python -c 'from _cpyrit import _cpyrit_cuda'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named _cpyrit
but cpyrit_cuda installed:
:~/pyrit_svn/cpyrit_cuda# python setup.py install
svn: This client is too old to work with working copy '.'. You need
to get a newer Subversion client, or to downgrade this working copy.
See http://subversion.tigris.org/faq.html#working-copy-format-change
for details.
running install
running build
running build_ext
Skipping rebuild of Nvidia CUDA kernel ...
Building modules...
running install_lib
running install_egg_info
Removing /usr/lib/python2.5/site-packages/CPyrit_CUDA-0.2.4.egg-info
Writing /usr/lib/python2.5/site-packages/CPyrit_CUDA-0.2.4.egg-info
So pyrit's command- list_cores shows to me only 2 CPUs and no any CUDA device.
Other software as airckrack-ng cuda and cuda-bruteforcer works normally and
use CUDA.
Original issue reported on code.google.com by [email protected]
on 7 Aug 2009 at 8:46
What steps will reproduce the problem?
1. Fresh install of Ubuntu 8.10 x64
2. Update 298 updates with Update Manager
3. Install latest NVIDIA Drivers from website
4. Install CUDA Toolkit
5. Install CUDA SDK
6. Check nvcc - V to confirm working
7. Compile sample applications as per "Getting Started" pdf from NVIDIA,
run deviceQuery to confirm proper GPU info
8. Check out svn
9. Install all packages similar and/or related to those listed in Pyrit
installation instructions
10.Double check build-essential is up to date
11. Build pyrit with ./setup.py build, then install with ./setup.py install
12. Confirm pyrit is working with list_cores and benchmark (confirmed!)
13. Build cpyrit_cuda with ./setup.py build, then install with ./setup.py
install
14. Confirm pyrit is working with list_cores and benchmark (FAILURE!)
What is the expected output? What do you see instead?
Expected output should be my CPU Core AND a GTX 280 GPU.
Instead I see
----------------------------
Pyrit 0.2.2 (C) 2008, 2009 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
Failed to load Pyrit's CUDA-driven core ('Failed to load CUBIN-module.').
Running benchmark for at least 60 seconds...
CPU-Core (x86_64): 319.60 PMKs/s, 98.84% occupancy
CPU-Core (x86_64): 323.59 PMKs/s, 97.63% occupancy
CPU-Core (x86_64): 298.87 PMKs/s, 92.49% occupancy
CPU-Core (x86_64): 319.65 PMKs/s, 98.83% occupancy
Benchmark done. 1261.70 PMKs/s total.
----------------------------
What version of the product are you using? On what operating system?
Pyrit 0.2.2 on Ubuntu 8.10 64-bit
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 6 Jul 2009 at 8:15
I have created a large Cowpatty Hash file (4.2gb) and unfortunately
Cowpatty is unable to read this (I get the error message "could not stat
Hashfile"). I have found this is because the 32bit file limit is about 2gb
and unless I upgrade to 64bit I will be unable to use the file.
Would it be possible to add an option to limit the Hash file size of 2gb
and then create an additional Hashfiles? eg: Hash_1 Hash_2 Hash_3 etc?
Original issue reported on code.google.com by [email protected]
on 27 Jul 2009 at 2:59
Hi lukas, I did not know how to contact you so that I do here. I wanted to
inform you that I have packaged pyrit for Ubuntu 9.04.
https://launchpad.net/~festor/+archive/hack-tools
Please, if you have time could you review the package for if I missed some
credits or copyright?
Thanks for making this wonderful tool.
Original issue reported on code.google.com by [email protected]
on 17 Jul 2009 at 6:49
Hello.
Firstly, thank you for so diligently working on this terrific project!
Secondly, I realize you don't "support" windows and plan not to from a
previous comment I've read from you. I'd like to write a how-to on
compiling pyrit under windows (via cygwin + minGW). There was a gentleman
who posted a comment about successfully getting pyrit to run on windows
with cygwin + mingw and he never responded to me. This response was on the
deleted FirstSteps Wiki page.
Since reading that comment, I have been trying to figure out to make pyrit
work on my windows vista computer on my own. I've gotten very far and I
seem to be hitting a hurdle that I feel like you would be able to assist
with (not windows-related).
I feel like the error stems from the fact that I'm missing something in my
cygwin environment and I can't be sure. I've installed SSL and related
libraries into cygwin, and all other packages that I thought could be
related/helpful. I'm posting the output below of the error, and I was
hoping you could point me in the right direction, or give me your thoughts
as to why I was receiving an "undefined reference" error from the beginning
of the build process?
Thank you very much!!
Andy Slezak
Python 2.5.2
andy@VISTA-ANDY2 /cygdrive/c/pyrit/pyrit
$ python setup.py build
running build
running build_py
running build_ext
building '_cpyrit._cpyrit_cpu' extension
writing build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.def
gcc -mno-cygwin -shared -s
build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.o
build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu_sse2.o
build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.def
-L/usr/lib/python2.5/config -lssl -lpython2.5 -o
build/lib.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.dll
build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.o: In function
`finalize_pmk_sse2':
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:282: undefined reference to
`_sse2_sha1_update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:283: undefined reference to
`_sse2_sha1_finalize'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:286: undefined reference to
`_sse2_sha1_update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:287: undefined reference to
`_sse2_sha1_finalize'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:290: undefined reference to
`_sse2_sha1_update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:291: undefined reference to
`_sse2_sha1_finalize'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:294: undefined reference to
`_sse2_sha1_update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:295: undefined reference to
`_sse2_sha1_finalize'
build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.o: In function
`prepare_pmk_openssl':
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:325: undefined reference to
`_SHA1_Init'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:326: undefined reference to
`_SHA1_Update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:330: undefined reference to
`_SHA1_Init'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:331: undefined reference to
`_SHA1_Update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:334: undefined reference to
`_EVP_sha1'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:334: undefined reference to
`_HMAC'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:337: undefined reference to
`_EVP_sha1'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:337: undefined reference to
`_HMAC' build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.o: In
function `finalize_pmk_openssl':
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:352: undefined reference to
`_SHA1_Update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:353: undefined reference to
`_SHA1_Final'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:356: undefined reference to
`_SHA1$
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:357: undefined reference to
`_SHA1_Final'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:363: undefined reference to
`_SHA1_Update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:364: undefined reference to
`_SHA1_Final'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:367: undefined reference to
`_SHA1_Update'
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:368: undefined reference to
`_SHA1_Final' build/temp.cygwin-1.5.25-i686-2.5/_cpyrit/_cpyrit_cpu.o: In
function `init_cpyrit_cpu':
/cygdrive/c/pyrit/pyrit/_cpyrit/_cpyrit_cpu.c:529: undefined reference to
`_detect_sse2'
collect2: ld returned 1 exit status
error: command 'gcc' failed with exit status 1
Original issue reported on code.google.com by andrewmslezak
on 27 Jul 2009 at 5:54
What steps will reproduce the problem?
1. Build and install any version of pyrit 0.2.4 and 0.2.5 were tested
2. Attempt to build cpyrit_CUDA 0.2.4 or 0.2.5 and the error attached will
appear
What is the expected output? What do you see instead?
Expect things to compile fine to install
What version of the product are you using? On what operating system?
Mac OS 10.5.8
Tried pyrit and cpyrit 0.2.4 and 0.2.5
Please provide any additional information below.
I have attached a screenshot of the output.
Original issue reported on code.google.com by [email protected]
on 25 Aug 2009 at 4:34
Attachments:
festor@sniper-win:~$ pyrit -e BoGnoNo -f prueba.cow export_cowpatty
Pyrit 0.2.3 (C) 2008, 2009 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Exporting to 'prueba.cow'...
Traceback (most recent call last):
File "/usr/bin/pyrit", line 710, in <module>
Pyrit_CLI().init()
File "/usr/bin/pyrit", line 97, in init
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/bin/pyrit", line 228, in export_cowpatty
for results in self.essidstore.iterresults(self.options.essid):
File "/var/lib/python-support/python2.6/cpyrit_util.py", line 307, in
iterresults
for key in self.iterkeys(essid):
File "/var/lib/python-support/python2.6/cpyrit_util.py", line 297, in
iterkeys
raise KeyError, "ESSID not in store."
KeyError: 'ESSID not in store.'
My system:
Ubuntu 9.04
python 2.6
pyrit 0.2.3-dev svn 120
Original issue reported on code.google.com by [email protected]
on 18 Jul 2009 at 8:34
Running:
1. pyrit -r capname.cap analyze
2. pyrit -r capname.cap -e APNAME -b 00:de:ad:c0:de:00 attack_batch
I get:
Traceback (most recent call last):
File "/usr/bin/pyrit", line 948, in <module>
Pyrit_CLI().init()
File "/usr/bin/pyrit", line 126, in init
options, commands = getopt.getopt(sys.argv[1:], "u:v:c:e:f:")
File "/usr/lib/python2.5/getopt.py", line 91, in getopt
opts, args = do_shorts(opts, args[0][1:], shortopts, args[1:])
File "/usr/lib/python2.5/getopt.py", line 191, in do_shorts
if short_has_arg(opt, shortopts):
File "/usr/lib/python2.5/getopt.py", line 207, in short_has_arg
raise GetoptError('option -%s not recognized' % opt, opt)
getopt.GetoptError: option -r not recognized
Using Pyrit 0.2.3-dev on BT4. I've also installed CUDA support (with nvidia
drivers), but found out later that the video card is actually Intel. Batch
works fine on both CPU cores(250pmk/s). "delete_essid" doesn't work. Using
a wordlist with 7 mln entires and 6 essids.
Original issue reported on code.google.com by [email protected]
on 31 Aug 2009 at 11:36
What steps will reproduce the problem?
1. pyrit batch
2. pyrit -f linksys.db export_cowpatty
3. pentest/wireless/cowpatty/cowpatty -d linksys.db -r
/pentest/wireless/cowpatty/wpapsk-linksys.dump -s linksys
What is the expected output? What do you see instead?
cowpatty 4.3 - WPA-PSK dictionary attack. <[email protected]>
Collected all necessary data to mount crack against WPA/PSK passphrase.
Starting dictionary attack. Please be patient.
key no. 10000: ïîêèâàèëîâ
key no. 20000: àíâåðáèê
key no. 30000: ×ÅÞÅÒÎÀÀ
key no. 40000: ïðîñà÷èâàòüñÿ
key no. 50000: òåëîäâèæåíèÿ
key no. 60000: òðàãè÷íîñòè
key no. 70000: ãðîìîçäîê
key no. 80000: íåïåðåâåðíóòûé
key no. 90000: çàìåñòèëî
key no. 100000: Country1
key no. 110000: çàâèñèìîñè
key no. 120000: êîäèôèêàöèþ
*** buffer overflow detected ***: /pentest/wireless/cowpatty/cowpatty
terminated
======= Backtrace: =========
/lib/tls/i686/cmov/libc.so.6(__fortify_fail+0x48)[0xb7dc76d8]
/lib/tls/i686/cmov/libc.so.6[0xb7dc5800]
/lib/tls/i686/cmov/libc.so.6(__fread_chk+0x143)[0xb7dc60f3]
/pentest/wireless/cowpatty/cowpatty[0x80490af]
/pentest/wireless/cowpatty/cowpatty[0x804a52b]
/pentest/wireless/cowpatty/cowpatty[0x804aa98]
/lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5)[0xb7ce3685]
/pentest/wireless/cowpatty/cowpatty[0x8048d11]
======= Memory map: ========
08048000-0804d000 r-xp 00000000 16:07 18119
/pentest/wireless/cowpatty/cowpatty
0804d000-0804e000 r--p 00004000 16:07 18119
/pentest/wireless/cowpatty/cowpatty
0804e000-0804f000 rw-p 00005000 16:07 18119
/pentest/wireless/cowpatty/cowpatty
086a2000-086c3000 rw-p 086a2000 00:00 0 [heap]
b7cb2000-b7cb3000 rw-p b7cb2000 00:00 0
b7cb3000-b7cc7000 r-xp 00000000 16:07 92663 /usr/lib/libz.so.1.2.3.3
b7cc7000-b7cc9000 rw-p 00013000 16:07 92663 /usr/lib/libz.so.1.2.3.3
b7cc9000-b7ccb000 r-xp 00000000 16:07 443795
/lib/tls/i686/cmov/libdl-2.8.90.so
b7ccb000-b7ccc000 r--p 00001000 16:07 443795
/lib/tls/i686/cmov/libdl-2.8.90.so
b7ccc000-b7ccd000 rw-p 00002000 16:07 443795
/lib/tls/i686/cmov/libdl-2.8.90.so
b7ccd000-b7e25000 r-xp 00000000 16:07 443789
/lib/tls/i686/cmov/libc-2.8.90.so
b7e25000-b7e27000 r--p 00158000 16:07 443789
/lib/tls/i686/cmov/libc-2.8.90.so
b7e27000-b7e28000 rw-p 0015a000 16:07 443789
/lib/tls/i686/cmov/libc-2.8.90.so
b7e28000-b7e2b000 rw-p b7e28000 00:00 0
b7e2b000-b7f5e000 r-xp 00000000 16:07 238066
/usr/lib/i686/cmov/libcrypto.so.0.9.8
b7f5e000-b7f66000 r--p 00132000 16:07 238066
/usr/lib/i686/cmov/libcrypto.so.0.9.8
b7f66000-b7f73000 rw-p 0013a000 16:07 238066
/usr/lib/i686/cmov/libcrypto.so.0.9.8
b7f73000-b7f77000 rw-p b7f73000 00:00 0
b7f77000-b7fa0000 r-xp 00000000 16:07 92253 /usr/lib/libpcap.so.0.9.8
b7fa0000-b7fa1000 r--p 00028000 16:07 92253 /usr/lib/libpcap.so.0.9.8
b7fa1000-b7fa2000 rw-p 00029000 16:07 92253 /usr/lib/libpcap.so.0.9.8
b7fa8000-b7fb5000 r-xp 00000000 16:07 434238 /lib/libgcc_s.so.1
b7fb5000-b7fb6000 r--p 0000c000 16:07 434238 /lib/libgcc_s.so.1
b7fb6000-b7fb7000 rw-p 0000d000 16:07 434238 /lib/libgcc_s.so.1
b7fb7000-b7fbb000 rw-p b7fb7000 00:00 0
b7fbb000-b7fd5000 r-xp 00000000 16:07 434196 /lib/ld-2.8.90.so
b7fd5000-b7fd6000 rw-p b7fd5000 00:00 0
b7fd6000-b7fd7000 r--p 0001a000 16:07 434196 /lib/ld-2.8.90.so
b7fd7000-b7fd8000 rw-p 0001b000 16:07 434196 /lib/ld-2.8.90.so
bf9c3000-bf9d8000 rw-p bffeb000 00:00 0 [stack]
ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
Aborted
What version of the product are you using? On what operating system?
latest from SVN on backtrack 4 pre
Please provide any additional information below.
cowpatty works well with the same dictionary and database generated by
genpmk that comes with it. I suppose that this error is due to the way
pyrit writes the linksys.db
Original issue reported on code.google.com by [email protected]
on 8 Jul 2009 at 7:25
What steps will reproduce the problem?
1. backtrack "full upgrade"
2. svn
3. version 173
4. maybe Python 2.6
jacob@lappy:~/svn/pyrit_svn/pyrit$ sudo python setup.py install
running install
running build
running build_py
running build_ext
running build_scripts
running install_lib
byte-compiling /usr/lib/python2.5/site-packages/cpyrit/storage.py to
storage.pyc
/usr/lib/python2.5/site-packages/cpyrit/storage.py:53: Warning: 'with' will
become a reserved keyword in Python 2.6
File "/usr/lib/python2.5/site-packages/cpyrit/storage.py", line 53
with open(os.path.join(essidpath, 'essid'), 'rb') as f:
^
SyntaxError: invalid syntax
writing byte-compilation script '/tmp/tmpPUp_Xs.py'
/usr/bin/python -O /tmp/tmpPUp_Xs.py
/usr/lib/python2.5/site-packages/cpyrit/storage.py:53: Warning: 'with' will
become a reserved keyword in Python 2.6
File "/usr/lib/python2.5/site-packages/cpyrit/storage.py", line 53
with open(os.path.join(essidpath, 'essid'), 'rb') as f:
^
SyntaxError: invalid syntax
removing /tmp/tmpPUp_Xs.py
running install_scripts
changing mode of /usr/bin/pyrit to 755
running install_egg_info
Removing /usr/lib/python2.5/site-packages/Pyrit-0.2.5.egg-info
Writing /usr/lib/python2.5/site-packages/Pyrit-0.2.5.egg-info
jacob@lappy:~/svn/pyrit_svn/pyrit$
Original issue reported on code.google.com by [email protected]
on 19 Sep 2009 at 9:26
Got some errors with version112; pyrit compiles and is running a fine
benchmark. (almost 30% faster with SSE2 on an old Athlon X2)
Stream-function seem to be broken; ‘has died unexpectedly’ ? Stream works
fine after going back to v111.
greetings, Dapi
pyrit list_cores
#1: ‘CPU-Core (SSE2)’
#2: ‘CPU-Core (SSE2)’
pyrit$ pyrit benchmark
CPU-Core (SSE2): 274.10 PMKs/s (97.84% occupancy)
CPU-Core (SSE2): 273.64 PMKs/s (98.85% occupancy)
Benchmark done. 547.73 PMKs/s total.
pyrit list_cores
The following cores seem available…
#1: ‘ATI-Stream device 1′
#2: ‘CPU-Core (SSE2)’
pyrit benchmark
Pyrit 0.2.3-dev (C) 2008, 2009 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Running benchmark for at least 60 seconds…
Exception in thread ATI-Stream device 1:
Traceback (most recent call last):
File “/usr/lib/python2.6/threading.py”, line 525, in __bootstrap_inner
self.run()
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 153, in run
self._testComputeFunction(101)
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 66, in
_testComputeFunction
raise SystemError, “Test-vector does not result in correct result.”
SystemError: Test-vector does not result in correct result.
Exception in thread CPU-Core (SSE2):
Traceback (most recent call last):
File “/usr/lib/python2.6/threading.py”, line 525, in __bootstrap_inner
self.run()
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 71, in run
essid, pwlist = self.queue._gather(self.buffersize)
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 370, in
_gather
self._check_cores()
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 287, in
_check_cores
raise SystemError, “The core ‘%s’ has died unexpectedly.” % core
SystemError: The core ‘ATI-Stream device 1′ has died unexpectedly.
Traceback (most recent call last):
File “/usr/local/bin/pyrit”, line 1088, in
Pyrit_CLI().init()
File “/usr/local/bin/pyrit”, line 193, in init
}.setdefault(commands[0] if len(commands) > 0 else ‘help’,
self.print_help)()
File “/usr/local/bin/pyrit”, line 543, in benchmark
cp.enqueue(’foo’, pws, block=True)
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 316, in
enqueue
self._check_cores()
File “/usr/local/lib/python2.6/dist-packages/cpyrit.py”, line 287, in
_check_cores
raise SystemError, “The core ‘%s’ has died unexpectedly.” % core
SystemError: The core ‘ATI-Stream device 1′ has died unexpectedly.
Original issue reported on code.google.com by [email protected]
on 11 Jul 2009 at 7:30
With my ATi:
Running benchmark for at least 60 seconds...
#1: 'ATI-Stream device 1': 146.93 PMKs/s (Occupancy 96.65%; RTT 55.8 secs)
#2: 'CPU-Core (SSE2)': 609.38 PMKs/s (Occupancy 76.26%; RTT 2.7 secs)
Benchmark done. 756.31 PMKs/s total.
Without my ATi.
Running benchmark for at least 60 seconds...
#1: 'CPU-Core (SSE2)': 598.81 PMKs/s (Occupancy 97.91%; RTT 2.8 secs)
#2: 'CPU-Core (SSE2)': 603.63 PMKs/s (Occupancy 99.81%; RTT 2.7 secs)
Benchmark done. 1202.44 PMKs/s total.
Why RTT of my Radeon HD3470 is more big than RTT of my(s) CPU(s)? It's just
curious.
Original issue reported on code.google.com by [email protected]
on 20 Jul 2009 at 6:34
What steps will reproduce the problem?
1. installed pyrit via trunk
2. added essid and wordlistfile
3. typed: pyrit batch
What is the expected output? What do you see instead?
i expect that pyrit writes the .db. instead i get this msg:
p:~$ pyrit batch
Pyrit 0.2.4-dev (svn r163) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
Working on ESSID 'FRITZ!Box WLAN 3131'
Traceback (most recent call last):
File "/usr/local/bin/pyrit", line 6, in <module>
pyrit_cli.Pyrit_CLI().initFromArgv()
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 114, in
initFromArgv
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/local/lib/python2.6/dist-packages/pyrit_cli.py", line 460, in
batchprocess
(idx+1, len(self.passwdstore), 100.0 * (idx+1) / len(self.passwdstore),
UnboundLocalError: local variable 'idx' referenced before assignment
--
it seems that pyrit has problems with pyhton?
im using --> Python 2.6.2 (release26-maint, Apr 19 2009, 01:56:41)
What version of the product are you using? On what operating system?
newest trunk (Pyrit 0.2.4-dev (svn r163))
Please provide any additional information below.
it worked with < svn r163
Original issue reported on code.google.com by [email protected]
on 12 Aug 2009 at 8:48
What steps will reproduce the problem?
1. analyze the attached file
What is the expected output? What do you see instead?
Pyrit does detect the AP (without ESSID) but does not detect a Station or
the handshake
Please use labels and text to provide additional information.
Same problem as aircrack-ng's ticket #491
Original issue reported on code.google.com by [email protected]
on 3 Aug 2009 at 4:04
Attachments:
What steps will reproduce the problem?
1. time pyrit -f 8english.txt -e linksys passthrough | cowpatty -d - -s
linksys -r /usr/share/doc/cowpatty-4.3/wpapsk-linksys.dump
What is the expected output? What do you see instead?
I get "Invalid word length: 7", but expect "key no. 10000: Damayanti"
What version of the product are you using? On what operating system?
svn 107 and Fedora 11 x86_64 Linux
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 5 Jul 2009 at 5:52
Attachments:
What steps will reproduce the problem?
1.compile r147 from svn
2.run pyrit
What is the expected output? What do you see instead?
For pyrit to run =P
What version of the product are you using? On what operating system?
using ubuntu 9.04 64bit with pyrit r147
Please provide any additional information below.
adam@laptop:~/pyrit-read-only/pyrit$ sudo pyrit
Traceback (most recent call last):
File "/usr/local/bin/pyrit", line 32, in <module>
import cpyrit_util as util
File "/usr/local/lib/python2.6/dist-packages/cpyrit_util.py", line 53, in
<module>
import scapy.config
ImportError: No module named scapy.config
Original issue reported on code.google.com by [email protected]
on 3 Aug 2009 at 8:15
What steps will reproduce the problem?
1. Run: pyrit benchmark
What is the expected output? What do you see instead?
Expected is running benchmark, bu the only result I get is:
Traceback (most recent call last):
File "/usr/bin/pyrit", line 531, in <module>
sys.exit(Pyrit_CLI().initFromArgv())
File "/usr/bin/pyrit", line 92, in initFromArgv
}.setdefault(commands[0] if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/bin/pyrit", line 413, in benchmark
cp = cpyrit.CPyrit()
File "/usr/lib64/python2.6/site-packages/cpyrit.py", line 191, in __init__
self.cores.append(CUDACore(queue=self, dev_idx=dev_idx))
File "/usr/lib64/python2.6/site-packages/cpyrit.py", line 113, in __init__
_cpyrit_cuda.CUDADevice.__init__(self, dev_idx)
SystemError: CUDA_ERROR_OUT_OF_MEMORY
What version of the product are you using? On what operating system?
Tested on GF 8400GS, Core 2 Duo 2Ghz
Fedora 11 x86_64 Kernel 2.6.29.6-213.fc11
CUDA Toolkit 2.3
NVIDIA Drivers 185.18.14
Pyrit 0.2.3
Original issue reported on code.google.com by [email protected]
on 30 Jul 2009 at 8:33
Hi,
I have some trouble exporting to the airolib-ng database.
I'm running Ubuntu 9.04 (x64) with 2.6.28-11-generic kernel and Pyrit
0.2.3-dev r106.
The Nvidia driver is: 185.18.14
This is the error I get:
Writing passwords... There was an error while exporting. The database has
not been modified... Traceback (most recent call last):
File "/usr/local/bin/pyrit", line 965, in <module>
Pyrit_CLI().init()
File "/usr/local/bin/pyrit", line 175, in init
}.setdefault(commands0? if len(commands) > 0 else 'help',
self.print_help)()
File "/usr/local/bin/pyrit", line 406, in export_hashdb
cur.executemany('INSERT OR IGNORE INTO passwd (passwd) VALUES (?)',
for pw in pwfile?)
sqlite3.ProgrammingError?: You must not use 8-bit bytestrings unless you
use a text_factory that can interpret 8-bit bytestrings (like text_factory
= str). It is highly recommended that you instead just switch your
application to Unicode strings.
I have no issues exporting to cowpatty file format, so actually this is my
workaround for now.
Thanks,
Max
Original issue reported on code.google.com by maximd%[email protected]
on 5 Jul 2009 at 9:07
Attachments:
Hi sorry didn't know where the 'feature request' section was, but anyway I
would love to see some kind of importing capabilities. So you can import
cow and hashdb files into the pyrit database. I find that pyrit is much
faster at getting through PMKs than using aircrack with a hashdb file. It
would be great if this could be added into a future version of pyrit.
I know this may not be a priority but it would be much appreciated if this
could be added at some stage.
Thanks Adam.
Original issue reported on code.google.com by [email protected]
on 23 Sep 2009 at 12:39
What steps will reproduce the problem?
1. pyrit list_cores
2.
3.
What is the expected output? What do you see instead?
My gpu registered!
CPU :(
What version of the product are you using? On what operating system?
latest from downloads
Please provide any additional information below.
ikex@ikebox:/usr/local/lib/python2.6/dist-packages/cpyrit$ ls
_cpyrit_cpu.so _cpyrit_stream.so pckttools.py util.py
cpyrit.py __init__.py pckttools.pyc util.pyc
cpyrit.pyc __init__.pyc pckttools.pyo util.pyo
cpyrit.pyo __init__.pyo _pckttools.so _util.so
ikex@ikebox:/usr/local/lib/python2.6/dist-packages/cpyrit$ python -c 'from
cpyrit import _cpyrit_stream'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: cannot import name _cpyrit_stream
ikex@ikebox:/usr/local/lib/python2.6/dist-packages/cpyrit$ python -c 'from
cpyrit import _cpyrit_cpu'
ikex@ikebox:/usr/local/lib/python2.6/dist-packages/cpyrit$
Original issue reported on code.google.com by [email protected]
on 11 Sep 2009 at 12:15
What steps will reproduce the problem?
1. run 'pyrit benchmark' without and with Stream-core is installed
2.
3.
What is the expected output? What do you see instead?
test from rev118
Pyrit 0.2.3-dev (svn r118) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
Running benchmark for at least 60 seconds...
CPU-Core (SSE2): 646.06 PMKs/s (99.71% occupancy)
CPU-Core (SSE2): 647.56 PMKs/s (96.07% occupancy)
CPU-Core (SSE2): 648.46 PMKs/s (99.77% occupancy)
CPU-Core (SSE2): 643.58 PMKs/s (99.78% occupancy)
Benchmark done. 2585.66 PMKs/s total.
test from rev119
Pyrit 0.2.3-dev (svn r119) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
Running benchmark for at least 60 seconds...
ATI-Stream device 1: 9665.21 PMKs/s (92.57% occupancy)
CPU-Core (SSE2): 634.58 PMKs/s (99.84% occupancy)
CPU-Core (SSE2): 634.37 PMKs/s (98.94% occupancy)
CPU-Core (SSE2): 633.92 PMKs/s (99.70% occupancy)
Benchmark done. 11568.07 PMKs/s total.
test from rev120
Pyrit 0.2.3-dev (svn r120) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
Running benchmark for at least 60 seconds...
ATI-Stream device 1: 9411.93 PMKs/s (93.82% occupancy)
CPU-Core (SSE2): 372.91 PMKs/s (98.79% occupancy)
CPU-Core (SSE2): 376.89 PMKs/s (99.70% occupancy)
CPU-Core (SSE2): 379.54 PMKs/s (97.34% occupancy)
Benchmark done. 10541.26 PMKs/s total.
rev120 without Stream-core
Pyrit 0.2.3-dev (svn r120) (C) 2008, 2009 Lukas Lueg
http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3
The ESSID-blobspace seems to be empty; you should create an ESSID...
Running benchmark for at least 60 seconds...
CPU-Core (SSE2): 625.91 PMKs/s (99.69% occupancy)
CPU-Core (SSE2): 591.09 PMKs/s (99.73% occupancy)
CPU-Core (SSE2): 613.17 PMKs/s (97.50% occupancy)
CPU-Core (SSE2): 622.54 PMKs/s (98.47% occupancy)
Benchmark done. 2452.71 PMKs/s total.
What version of the product are you using? On what operating system?
pyrit rev120 on Ubuntu 9.04-64bit Phenom II 920, ATI 4850
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 13 Jul 2009 at 11:08
What steps will reproduce the problem?
1.install scapy
2.try to analyze/attack with pyrit
3.
What is the expected output? What do you see instead?
instead of analyzing the dump i get error "Scapy 2.x is required to use Pyrit's
analyze/attack
functions but seems to be unavailable."
What version of the product are you using? On what operating system?
pyrit 0.2.4 on osx 10.5.8 with scapy 2.0.0.10
Please provide any additional information below.
i probably just have scapy in the wrong place or something so some info on
where pyrit looks for
scapy would probably solve the problem
Original issue reported on code.google.com by [email protected]
on 26 Aug 2009 at 1:28
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.