ea4k / klog Goto Github PK

If the user selects a satellite that uses a band that has never been used, KLog fails to add the band to the used bands and shows empty or wrong band/frequency.

Some widgets have a color defined by KLog itself.
In dark mode some widgets have black text on black background.

We can:

• read the color on start, before modifying and use that color by default or
• create a config in the color tab of settings for dark mode.

To make it easier for the user to know where the data is being entered

When wsjtx is running it impossible to edit a record or manually enter a record without it being overwritten or deleted by data coming from wsjtx.
It is inconvenient to stop wsjtx and impossible to use klog settings to turn off status info, as doing so clears the edit in progress.

MODE=MFSK, SUBMODE=Q65

Add in the Settings an option to allow the user to define the time range that KLog will measure to consider a QSO with same data as dupe.

As WSJTX, different configurations should be available and selectable by the user: callsign, qth, log, eLog...

QSOs coming from WSJT-x in real time, comes without RX Frequency and they are saved on the database without RX Frquency and displayed in red as 0,000 MHz

Statistics: Cumulative report (SV1GRN)

Search results list has QRZ column heading, also 'Tools->QRZ.com tools' where two sub-menus refer to 'QRZ' rather than Call/Callsign. Setup-> User Data has QRZ not Call/Callsign.

It would be interesting to select the language that KLog uses and not using only the one from the system

After Importing QSOs with "my_gridsquare" field empty, these can not be uploaded to loTW because they don't appear in the QSOs to be uploaded window. Once this field (MY_GRIDSQUARE) is fullfilled, they appear

The other way YY/XX0XX is still working

The new WSJTX version is going to add these two modes.

Link KLog to the wiki (https://wiki.klog.xyz)

"Keep these data" checkboxes in Comentary, My Data and Satellites Tabs are working correctly from one to qso to another, but if you double-click over another QSO on logwindow (to edit or check), after Modify or Clean, you loose all the data you want to keep on the different tabs.

The only way to view existing records in the log in detail is to 'Edit' the record.
At present a double click on a qso in the log list starts the edit mode.
I think that a single click (which highlights a single record) should also display ALL the details of that record in the 'qso' dialogue.
This is what I expect to see and find it confusing when I do not.
'Clear' would still clear this View.

Add one configurable field in the My Data and another one in Other.
To allow the user to manage SOTA, contests...

Add 2-3 qcombobox for the user ro select the ADIF field and 2-3 qlineedit for the data.

QSOs manually entered are Queued to be sent to eQSL, but not new QSOs coming from WSJT-x.

Check the start up process to find why it is taking too much to start.
It also takes a lot of time after importing an ADIF file.

When uploading to online service providers (eQSL, LoTW...) KLog shows a message at the end of the process informing that the temp file has been removed.
A checkbox allowing the user to select "don't show again" would be an option.

It may do KLog fail or it may be possible to do a SQL injection.

LoTW, qrz.com, Clublog, eQSL.cc, ...

Showing submode instead of mode, in the mode column will be easier for users.

I have still not been able to reproduce the error.

When confirming the the qsl, the Info widget is not updating the status for that band to confirmed, green

To reproduce:
Start klog
Check that Tools -> QRZ.com tools -> Check always the current callsign in qrz.com is checked
Enter a Callsign // Nothing happens
Click on Tools -> QRZ.com tools -> Check the current callsign in QRZ.com // Nothing happens
Click AGAIN on Tools -> QRZ.com tools -> Check the current callsign in QRZ.com // Finally the data appears

This is repeatable in 1.4.7 and 1.5-RC2

On repeating the above after closing and running klog again, the Check box:
Tools -> QRZ.com tools -> Check always the current callsign in qrz.com has lost it's setting and is again unchecked, despite the matching checkbox in Setup -> Setup -> eLOG tab -> QRZ.com settings dialog "Check Automatically" being already checked.

After importing QSOs in ADIF without "Rx Frequency" field, RX Frequency in QSO Tab is displayed in red with a value = 0,000.

If "Tools->QRZ.com tools->Check always the current callsign in QRZ.com" is unchecked, OR "Setup->eLOG->QRZ->Check Automatically" is unchecked, the next time "Setup->OK is used, the entry: "QRZcomAuto=True;" is removed from klogrc
It should only be set False not removed. This is 1.4.6.

Some functions are deprecated.
Update the error management.

setupdialog.cpp:706:50: warning: 'QTextStream& QTextStreamFunctions::endl(QTextStream&)' is deprecated: Use Qt::endl [-Wdeprecated-declarations]
706 | stream << "QRZcomAuto=True;" << endl;
|

To be decided if useful or not for KLog.

http://www.ok2kkw.com/ediformat.htm

SatMode depends on Uplink/Downlink bands used. That's why is possible to fill it automatically without any user intervention.