egandro / docker-qemu-arm Goto Github PK

Hi, when I install this on my Android Tablet. I met this error...

./termux-setup.sh: 15: .: config.env: not found

How can I fix it?

Thank you.

when i try to install. this is happen.
what it is?...
can you help me

Closing connection 0
spawn rm -f ./qemukey ./qemukey.pub
spawn ssh-keygen -b 2048 -t rsa -N -f ./qemukey
couldn't execute "ssh-keygen": no such file or directory
while executing
"spawn ssh-keygen -b 2048 -t rsa -N "" -f ./qemukey"
(file "installqemu.expect" line 20)

When ./startqemu.sh I get the following error: BdsDxe: failed to load Boot0001 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0): Not Found
BdsDxe: failed to load Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0): Not Found

What's the issue and how should I fix it?

Hello. After successfuly install, I run ./startqemu.sh...login with (user : root, password : ) alpine says : Login Incorrect...please password for login user root. Thankyou.

Τhe script works perfectly.
Τhanks a lot @egandro!
I start the virtual machine on termux, with the command:

cd alpine && ./startqemu.sh

I have created heimdall and portainer containers.
But, how can I connect to them with a graphical interface...
inside the browser of the host android device?
In which address?
I have tried the following addresses so far:
http://localhost:2222
http://<vm_eth0_ip>:9000
http://<vm_docker0_ip>:9000
http://127.0.0.1:9000 etc.
Thanks in advance.

Hello, thanks for this superb script that make installation really easy, but I can't start hello-world, what's wrong?

Please update the script for latest alpine and docker

Installation crashes with this message

ERROR: unable to select packages:
                   dosfstools (no such package):
                       required by: world[dosfstools]
                  e2fsprogs (no such package):
                        required by: world[e2fsprogs] 
                  grub-efi (no such package): 
                        required by: world[grub-efi]
                    sfdisk (no such package):
                           required by: world[sfdisk]
                    alpine:~# y 
                    -ash: y: not found
                       alpine:~# ^[[20;11R```

• Starting busybox acpid ...
  [ ok ]
• Starting busybox crond ...
  [ ok ]
  wget: bad address 'mirrors.alpinelinux.org'
  Updating repository indexes... ERROR: http://dl-cdn.alpinelinux.org/alpine/v3.14/main: temporary error (try again later)
  ERROR: http://dl-cdn.alpinelinux.org/alpine/v3.14/community: temporary error (try again later)
  ERROR: http://dl-cdn.alpinelinux.org/alpine/v3.14/main: temporary error (try again later)
  ERROR: http://dl-cdn.alpinelinux.org/alpine/v3.14/community: temporary error (try again later)
  ERROR: unable to select packages:
  openssh (no such package):
  required by: world[openssh]
• rc-update: service `sshd' does not exist
• rc-service: service `sshd' does not exist
  ERROR: http://dl-cdn.alpinelinux.org/alpine/v3.14/main: temporary error (try again later)
  ERROR: http://dl-cdn.alpinelinux.org/alpine/v3.14/community: temporary error (try again later)
  ERROR: unable to select packages:
  dosfstools (no such package):
  required by: world[dosfstools]
  e2fsprogs (no such package):
  required by: world[e2fsprogs]
  grub-efi (no such package):
  required by: world[grub-efi]
  sfdisk (no such package):
  required by: world[sfdisk]
  alpine:# y
  -ash: y: not found
  alpine:# ^[[60;11R
  ^C

I was still able to ping google.com and visiting http://dl-cdn.alpinelinux.org/alpine/v3.14/main/ ina browser works

~ $ ping -c 1 google.com
PING google.com (142.250.217.142) 56(84) bytes of data.
64 bytes from lax31s19-in-f14.1e100.net (142.250.217.142): icmp_seq=1 ttl=112 time=31.2 ms

--- google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 31.281/31.281/31.281/0.000 ms

Hi, I have a samsung note 20 ultra, and tried running your script.

The script runs up through downloading and creating the image, adding the packages as below,

` alpine:~# ^[[31;11Rrc-update add docker

• service docker added to runlevel default
  alpine:~# ^[[31;11Rapk add zram-init
  (1/22) Installing e2fsprogs-extra (1.46.2-r0)
  (2/22) Installing blkid (2.37-r0)
  (3/22) Installing libcap-ng (0.8.2-r0)
  (4/22) Installing setpriv (2.37-r0)
  (5/22) Installing libmount (2.37-r0)
  (6/22) Installing libsmartcols (2.37-r0)
  (7/22) Installing findmnt (2.37-r0)
  (8/22) Installing mcookie (2.37-r0)
  (9/22) Installing hexdump (2.37-r0)
  (10/22) Installing lsblk (2.37-r0)
  (11/22) Installing libfdisk (2.37-r0)
  (12/22) Installing sfdisk (2.37-r0)
  (13/22) Installing cfdisk (2.37-r0)
  (14/22) Installing partx (2.37-r0)
  (15/22) Installing flock (2.37-r0)
  (16/22) Installing logger (2.37-r0)
  (17/22) Installing uuidgen (2.37-r0)
  (18/22) Installing libeconf (0.3.8-r1)
  (19/22) Installing util-linux (2.37-r0)
  (20/22) Installing util-linux-openrc (2.37-r0)
  (21/22) Installing zram-init (11.0-r0)
  (22/22) Installing zram-init-openrc (11.0-r0)
  Executing busybox-1.33.1-r3.trigger
  OK: 368 MiB in 90 packages `

Then it ends abruptly without downloading the startup scripts as below:

` alpine:# ^[[31;11Rhalt
alpine:# ^[[31;11R * Remove zram0 swap
[ ok ]

• Unloading zram module...
  [ ok ]
• Saving random seed ... [ ok ]
• Stopping sshd ... [ ok ]
• Shutting down ssh connections ... * sshd: caught SIGTERM, aborting
  [ ok ]
• Stopping Docker Daemon ... [ ok ]
• Stopping busybox crond ... [ ok ]
• Stopping busybox syslog ... [ ok ]
• Stopping busybox acpid ... [ ok ]
• Unmounting loop devices
• Unmounting filesystems
• Unmounting /boot/efi ... [ ok ]
• Deactivating swap devices ... [ ok ]
• Setting hardware clock using the system clock [UTC] ... [ ok ]
• Stopping busybox mdev ... [ ok ]
• Terminating remaining processes ... [ ok ]
• Killing remaining processes ... [ ok ]
• Saving dependency cache ... [ ok ]
  [ ok ]
• Remounting remaining filesystems read-only ... * Remounting / read only ... [ ok ]
  [ ok ]
  The system is going down NOW!
  Sent SIGTERM to all processes
  Sent SIGKILL to all processes
  Requesting system halt
  [ 165.616485] reboot: System halted
  ~ $ ;14R;90R;14R;14R;102R;14R;14R;11R;11R;11R;11R;11R;11R;11R;11R;11R;11R;11R;11R;11R `

Any suggestions?

Thanks so much for the script!

Hello, I did an upgrade to the to the rolling development version "edge", according to the instructions.
I edited the file "installqemu.expect" and increased the size to 6GB.
The error message that appears during the reboot is as follows:

* Starting Docker Daemon ... [ ok ]
* Starting k3s ... [ ok ]
* Starting sshd ... [ ok ]
* Activating swap devices ... [ ok ]
* Loading zram module...
[ ok ]
* Swap->zram0
[ ok ]
* Mount zram1 /tmp
mke2fs 1.46.2 (28-Feb-2021)
mkfs.ext4: Invalid argument while setting blocksize; too small for device

zram-init:
mkfs.ext4 /dev/zram1 failed
[ !! ]

Welcome to Alpine Linux 3.14
Kernel 5.10.46-0-virt on an x86_64 (/dev/ttyS0)```