egzumer / iota-price-ticker-v2-ttgo-t-display Goto Github PK

Index of this project

• Add ESP32 Arduino IDE
• Libraries for Arduino IDE
• Case information

Before we can start compiling, the Arduino IDE must have the TTGO-T-Display board, based on an ESP32 in the board selection available. The instruction on https://randomnerdtutorials.com/installing-the-esp32-board-in-arduino-ide-windows-instructions/ In board selector you can select "ESP32 Dev Module" for TTGO-T-Display.

For MAC users install the "CP210x USB to UART Bridge VCP Drivers" from Silicon Labs, the port to select is /dev/cu.SLAB_USBtoUART in Arduino IDE under tools-->Port
https://www.silabs.com/community/interface/knowledge-base.entry.html/2017/01/10/legacy_os_softwarea-bgvU

• TFT_eSPI
• CoinMarketCapApi.h
• ArduinoJSON version 6.x is testet

The instruction for the "TFT_eSPI" and TTGO-T-Display can be found here https://github.com/Xinyuan-LilyGO/TTGO-T-Display
If you are have problem with the "wifi.h" delete the arduino/libraries/wiFi directory, you can use the esp32 WiFi.h

If you like my work, you can give me a tip for a beer :)

IOTA Donate address: TGSIBCRENEIPDSHKTAOSW9GXWCAFKPYSFYARVIEZDGQNNODEDP9VEVWLWEDGTAMFSBINPHBWFQQLTGK9CGJD9PGYFD