The bluetoot is all bugged.
When turning off the bluetooth while logged in, trying to reconnect will no longer power on.
Being logged in by turning bluetooth off and rebooting the system, it will activate again. When turning off bluetooth on the login screen and logged in, when restarting the service bluettoth does not start, the icon disappears from the bar and in system settings.

Bus 002 Device 004: ID 0cf3:3004 Atheros Communications, Inc. AR3012 Bluetooth 4.0
Bus 002 Device 003: ID 0c45:9924 Microdia
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2232:1029 Silicon Motion WebCam SC-13HDL11939N
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[ 2.264635] usb 2-1.4: Product: Bluetooth USB Host Controller
[ 9.573938] Bluetooth: Core ver 2.21
[ 9.573960] Bluetooth: HCI device and connection manager initialized
[ 9.573965] Bluetooth: HCI socket layer initialized
[ 9.573968] Bluetooth: L2CAP socket layer initialized
[ 9.573976] Bluetooth: SCO socket layer initialized
[ 18.247205] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.247210] Bluetooth: BNEP filters: protocol multicast
[ 18.247215] Bluetooth: BNEP socket layer initialized
[ 34.141057] Bluetooth: RFCOMM TTY layer initialized
[ 34.141068] Bluetooth: RFCOMM socket layer initialized
[ 34.141077] Bluetooth: RFCOMM ver 1.11
[ 165.283518] Bluetooth: hci0 command 0x2007 tx timeout
[ 167.288480] Bluetooth: hci0 command 0x200f tx timeout
[ 169.293457] Bluetooth: hci0 command 0x2010 tx timeout
[ 171.298379] Bluetooth: hci0 command 0x0c6d tx timeout

Before updating the system, the bluetooth configuration showed on and off, and visible and envisivel, now shows like this.

For some reason my notebook gets into a state where Bluetooth cannot be enabled through the indicator. The solution is to use rfkill to unblock bluetooth. We should make sure this can be done through the indicator and not just through Terminal

I've not been able to pinpoint the issue directly, digging through the commit logs hasn't turned up anything useful. But, the latest release fails to build against git master versions of granite and wingpanel, with this error message:

Compilation failed: 1 error(s), 1 warning(s)
src/CMakeFiles/bluetooth.dir/build.make:103: recipe for target 'src/bluetooth_valac.stamp' failed
warning: --save-temps has no effect when -C or --ccode is set
/builddir/build/BUILD/wingpanel-indicator-bluetooth-2.0.3+git170818.222502.ca2c16ea/src/Widgets/Device.vala:45.9-45.26: error: The name `get_content_widget' does not exist in the context of `Bluetooth.Widgets.Device.new'
        get_content_widget ().add (grid);
        ^^^^^^^^^^^^^^^^^^
make[2]: *** [src/bluetooth_valac.stamp] Error 1
make[2]: Leaving directory '/builddir/build/BUILD/wingpanel-indicator-bluetooth-2.0.3+git170818.222502.ca2c16ea'
CMakeFiles/Makefile2:226: recipe for target 'src/CMakeFiles/bluetooth.dir/all' failed
make[1]: *** [src/CMakeFiles/bluetooth.dir/all] Error 2
Makefile:132: recipe for target 'all' failed
make: *** [all] Error 2

Is it possible the bluetooth indicator is still using things that were deprecated/removed in granite or wingpanel? If it helps, the nightly build on July 9 succeeded, but the build today (August 19) failed, and there were no code changes in this project at all (except the release today).

Each time you manually have to disable Bluetooth after login back from screen lock.

Step to reproduce:

Login > Disable Bluetooth > Click on shutdown icon > Select "lock"

This will automatically enable Bluetooth and each time after login back from lock, have to again disable Bluetooth.

Hi, could you add translation files for Silesian?

ISO 639-3: szl
Plurals: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);

Thank you!

When sending photo from mobile phone to the PC via Bluetooth there is no any notification for the permission of receiving files so the send file fails. However, sending from the PC to the mobile phone, i.e the opposite direction, it works fine. This is also applicable with pairing the two devices.

~$ screenfetch
                                     said@L850
         eeeeeeeeeeeeeeeee           OS: elementary OS 5.1 hera
      eeeeeeeeeeeeeeeeeeeeeee        Kernel: x86_64 Linux 5.0.0-37-generic
    eeeee  eeeeeeeeeeee   eeeee      Uptime: 25m
  eeee   eeeee       eee     eeee    Packages: 2189
 eeee   eeee          eee     eeee   Shell: bash 4.4.20
eee    eee            eee       eee  Resolution: 1440x900
eee   eee            eee        eee  DE: GNOME 
ee    eee           eeee       eeee  WM: Mutter(Gala)
ee    eee         eeeee      eeeeee  WM Theme: elementary
ee    eee       eeeee      eeeee ee  GTK Theme: elementary [GTK2/3]
eee   eeee   eeeeee      eeeee  eee  Icon Theme: Papirus
eee    eeeeeeeeee     eeeeee    eee  Font: Open Sans 9
 eeeeeeeeeeeeeeeeeeeeeeee    eeeee   CPU: Intel Core i5-2450M @ 4x 3.1GHz [50.0°C]
  eeeeeeee eeeeeeeeeeee      eeee    GPU: AMD/ATI Thames [Radeon HD 7500M/7600M Series]
    eeeee                 eeeee      RAM: 1207MiB / 7933MiB
      eeeeeee         eeeeeee       
         eeeeeeeeeeeeeeeee          

I am using a bluetooth mouse. After some time (more or less 30 minutes) bluetooth turns off and I should turn on and pair the mouse again.

Sometimes even the wing panel icon disappear and I have to go to settings, where it looks like in the attachement. and turn on off and on combination to get it work again.

It's started like one month ago more or less. (elementaryOS loki 0.4)

dmesg log after the turning off:
dmesg | grep -i blue
[ 4.098872] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 5.214065] Bluetooth: Core ver 2.21
[ 5.214389] Bluetooth: HCI device and connection manager initialized
[ 5.214784] Bluetooth: HCI socket layer initialized
[ 5.214788] Bluetooth: L2CAP socket layer initialized
[ 5.214794] Bluetooth: SCO socket layer initialized
[ 6.529893] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.529898] Bluetooth: BNEP filters: protocol multicast
[ 6.529903] Bluetooth: BNEP socket layer initialized
[ 7.346342] Bluetooth: hci0 command 0x0c03 tx timeout
[ 15.342733] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[ 17.346193] Bluetooth: hci0 command 0x0c03 tx timeout
[ 25.342193] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[ 97.754737] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 97.757726] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 97.965794] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 98.023225] Bluetooth: RFCOMM TTY layer initialized
[ 98.023231] Bluetooth: RFCOMM socket layer initialized
[ 98.023240] Bluetooth: RFCOMM ver 1.11
[ 101.354954] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 101.354960] Bluetooth: HIDP socket layer initialized
[ 101.355500] input: ThinkPad Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/bluetooth/hci0/hci0:256/0005:17EF:6038.0004/input/input21
[ 101.355767] hid-generic 0005:17EF:6038.0004: input,hidraw3: BLUETOOTH HID v2.00 Mouse [ThinkPad Bluetooth Laser Mouse] on 7c:7a:91:1a:4f:6d
[ 495.374120] input: ThinkPad Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/bluetooth/hci0/hci0:256/0005:17EF:6038.0005/input/input22
[ 495.374402] hid-generic 0005:17EF:6038.0005: input,hidraw3: BLUETOOTH HID v2.00 Mouse [ThinkPad Bluetooth Laser Mouse] on 7c:7a:91:1a:4f:6d
[ 4879.599772] Bluetooth: hci0: read Intel version: 370710018002030d55
[ 4879.599777] Bluetooth: hci0: Intel device is already patched. patch num: 55
[ 4913.650428] input: ThinkPad Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/bluetooth/hci0/hci0:256/0005:17EF:6038.0006/input/input23
[ 4913.651531] hid-generic 0005:17EF:6038.0006: input,hidraw3: BLUETOOTH HID v2.00 Mouse [ThinkPad Bluetooth Laser Mouse] on 7c:7a:91:1a:4f:6d

service bluetooth status: (after the bug)
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Út 2017-01-03 10:35:31 CET; 1h 21min ago
     Docs: man:bluetoothd(8)
 Main PID: 3254 (bluetoothd)
   Status: "Running"
   CGroup: /system.slice/bluetooth.service
           └─3254 /usr/lib/bluetooth/bluetoothd

led 03 11:55:23 Tomsgu bluetoothd[3254]: gatt-time-server: Input/output error (5)
led 03 11:55:23 Tomsgu bluetoothd[3254]: Not enough free handles to register service
led 03 11:55:23 Tomsgu bluetoothd[3254]: Not enough free handles to register service
led 03 11:55:23 Tomsgu bluetoothd[3254]: Sap driver initialization failed.
led 03 11:55:23 Tomsgu bluetoothd[3254]: sap-server: Operation not permitted (1)
led 03 11:55:23 Tomsgu bluetoothd[3254]: Endpoint registered: sender=:1.51 path=/MediaEndpoint/A2DPSource
led 03 11:55:23 Tomsgu bluetoothd[3254]: Endpoint registered: sender=:1.51 path=/MediaEndpoint/A2DPSink
led 03 11:55:47 Tomsgu bluetoothd[3254]: Can't get HIDP connection info
led 03 11:55:52 Tomsgu bluetoothd[3254]: connect error: Host is down (112)
led 03 11:55:56 Tomsgu bluetoothd[3254]: Can't get HIDP connection info

after wing panel crash:
led 03 12:00:17 Tomsgu bluetoothd[3254]: Can't get HIDP connection info
led 03 12:00:17 Tomsgu bluetoothd[3254]: Endpoint unregistered: sender=:1.51 path=/MediaEndpoint/A2DPSource
led 03 12:00:17 Tomsgu bluetoothd[3254]: Endpoint unregistered: sender=:1.51 path=/MediaEndpoint/A2DPSink
led 03 12:00:45 Tomsgu systemd[1]: Started Bluetooth service.

lspci:lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I218-V (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 6 (rev e4)
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)

Launchpad Details: #LP1653661 Tomáš Jakl - 2017-01-03 10:58:44 +0000

When you connect a BT headset it usually connects first to HSP/HFP mode and then you have to switch to A2DP mode. To make A2DP work you need to do a lot of juggling (disconnecting, reconecting switching profiles...), so why don't just set A2DP as default?

I don't know if many people uses HSP but it sounds so bad so I don't think many people would want to use it. That's why I think this could be a good idea.

A more extreme idea would be removing HSP/HFP but I don't think you would like that idea.. I wouldn't mind if you remove it, though ;)

The bluetooth (and only this one) indicator is still blurry in new greeter @ 4K and scaling x2.
Once I switch off the BT it becomes crisp and stays like that till next reboot when, again, per default it is blurry.

My system:

In order to solve elementary/switchboard-plug-bluetooth#42 we'd need to add a settings key here in the indicator

Alternatively I suppose we could do this from the wingpanel side and create a way to hide any arbitrary indicator. Thoughts?

When I turn on bluetooth on the indicator panel, the indicator doesn't change.

Information about my system:

Notebook Lenovo IdeaPad L340-15API
No LSB modules are available.
Distributor ID: elementary
Description: elementary OS 5.1.2 Hera
Release: 5.1.2
Codename: hera
Linux 5.3.0-28-generic

Probably something fucky here with style classes being added/removed

It would break convention, but it might be a bit more discoverable and accurate to name this label something like "Manage Devices…"

When turning off Bluetooth and then ending the user session, on the user login screen bluetooth still shows as active, when deactivating Bluetooth on the user login screen and restarting the system, Bluetooth returns to show as active on the screen Login. When you log on to the system, Bluetooth starts to crash.

I believe that because of the logic problem in the programming of the Bluetooth shutdown, being logged in or in the login screen, it is conflicting and consequently causing error in Bluetooth.

Portuguese:
Ao desligar o Bluetooth e em seguida encerrar a sessão do usuário, na tela de login do usuário o bluetooth ainda mostra como ativo, ao desativar o Bluetooth na tela de login de usuário e reiniciar o sistema, o Bluetooth volta a mostrar como ativo na tela login. Ao logar usuário no sistema o Bluetooth começa a apresentar falhas.

Acredito que por problema de logica na programação do desligamento do Bluetooth, estando logando ou na tela de login, esta entrando em conflito e em consequência provocando error no Bluetooth.

Lewis brought up the idea of locking the session when a bluetooth device disconnects. This would mean that for example walking away from the computer should lock the screen.

I think that we would need to do some kind of roundtripping and not just watch for a disconnect to make sure we're getting a good idea of proximity.

Launchpad Details: #LP1593546 Daniel Fore - 2016-06-17 04:18:35 +0000

Indicator freezes if disabled while paired with a device

Connect to a device
Flick the main breaker off
???
Watch it freeze

Launchpad Details: #LP1584420 Felipe Escoto - 2016-05-22 03:26:51 +0000

There is a bounty on this issue on Bountysource

The $50 bounty on this issue has been claimed at Bountysource.

There is no icon displayed for the Logi R500.

A somewhat related issue is that is looks like there is no placeholder icon and the layout is kind of broken.

There should be a toggle for activating the file recieve feature from the sharing plug in the bluetooth indicator.

I would argue the "discover devices" entry is not used often enough that users would need a shortcut to it, since the use case of bluetooth is, generally, that you have a small set of personal devices that you would use with it. Thus, this toggle can be added in its place.

Launchpad Details: #LP1592507 Zisu Andrei - 2016-06-14 18:15:20 +0000

El bluetooth de mi laptop HP pavilion 14 v003la si es reconocido por elementaryOS, pero al buscar dispositivos no encuentra ninguno.

Launchpad Details: #LP1613511 Meny - 2016-08-16 03:10:42 +0000

To quickly pick out devices based on their status (connected / not connected / ...) it might be nice to also use the state "badges" we use in the Bluetooth settings:

The Bluetooth settings use a overlayed image with icons like "user-offline", "user-away" and "user-offline":
https://github.com/elementary/switchboard-plug-bluetooth/blob/master/src/DeviceRow.vala#L73

Re: The 'New Year' update publicised here https://medium.com/elementaryos/loki-updates-for-the-new-year-ff6b6ba65531

This update aimed to fix the issue of the Bluetooth indicator falling out of sync with the state of the adaptor.

Having applied the update I am still seeing this issue.

Launchpad Details: #LP1660898 Nicholas - 2017-02-01 06:41:59 +0000

Currently in all Linux distributions I know, there is no way of connecting a bluetooth mouse without another mouse. macOS shows a window where you can do this as it's very first thing when you set up a new Mac that has no mouse connected (like a mac mini or iMac).

I think this app would be perfect to do something similar. Would add a lot to the UX polish.

Unfortunately I can't find a screenshot for this and currently don't have access to a stationary Mac, but from what I remember the dialog was very simple. It definitely wasn't the full bluetooth prefpane. It just said something along the lines "There is no mouse connected. Connect a wired mouse or put your Bluetooth mouse into pairing mode". It would then auto pair and connect any mouse that it found and I believe it would even automatically close the dialog.

The icon of the linked device isn't centered vertically, and as the icons doesn't have all the same shape/size it looks quite ugly especially when you hover it...

So that users get clearer updates and issue URLs are available

As the title says, the indicator dissapears after suspension, but if I click between network and battery I can see it's dropdwon and it works as it's supposed to. At least to me, it doesn't dissapear from settings pane as other issue said.

If I kill wingpanel or if I reboot, it comes back.
I don't know if it's useful, but the laptop is a HP 240 G7 with a RTL8723DE chip.

This is what the window looks like after clicking the bluetooth icon and then "Discover Devices...", no devices are shown, because the window is too small and it seems as there are no devices.

After stretching the window it looks like this:

Initiating the window with another size would solve this problem.

Latest eOS 5.0 renders tags instead of bold text.

Always after suspending my laptop bluetooth gets disabled and I have to activate it via wingpanel, so my bluetooth mouse gets connected.

No issues with bluetooth itself, besides it beeing switched off every time.

Launchpad Details: #LP1637400 Eric Göpel - 2016-10-28 05:58:12 +0000

which means it can be scrolled away. It should be outside the scroll box

Launchpad Details: #LP1666302 Daniel Fore - 2017-02-20 19:35:36 +0000

I use a stable standard system without any changes and always with the latest updates. Unfortunately I cannot say (yet) how the issue can be reproduced.

The CMake files need to be adapted, because right now, everything in data/* is installed indiscriminately by glob:

# Files
file (GLOB resources "${CMAKE_CURRENT_SOURCE_DIR}/data/*")
install (FILES ${resources} DESTINATION ${PKGDATADIR})

Since the new screenshot is the only "resource" in this case, those 3 lines can just be dropped, I think.

It looks like the device order is random:

Maybe we could order them alphabetically?

Counter part of: elementary/switchboard-plug-bluetooth#54. This also happens in this indicator.

I have this problem from the start of using elementary os & recently I noticed that on every system suspend, bluetooth icon moves towards battery indicator icon and after one or more supsend It disappears completely. The bluetooth is on & works correctly. If you look at the screenshots that I took from my screen you see the difference in space, between bluetooth & battery icons.

Since the elementary OS update of May, when I try to pair a new device via Bluetooth it's just crashing. Here are the steps:

I turn the Bluetooth on,
I turn my device on,
Bluetooth indicator and plug are crashing until I turn my device off.

It seems to crash at the moment it detects a new device, very strange. But I can't use Bluetooth anymore because of this. Any idea?

Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.

Prerequisites

• I have searched open and closed issues for duplicates.

Describe the bug

The list of devices in the bluetooth indicator is freqently incorrect.
Comparison of list in indicator with settings for example:

To Reproduce

I'm afraid this is unclear. It happens over time.

1. Have some paired bluetooth deviced.
2. Open indicator
3. Execute both or eather one of these commands:
   • sudo modprobe -r btusb && sudo modprobe btusb
   • sudo service bluetooth restart
4. Reopen indicator

I think it would be interesting to compare the logic in the indicator vs the settings and see if there are mistakes in the indicator.

Expected behavior

The list of devices in the indicator is consistent with the list of devices in the bluetooth settings.

Actual behavior

The list of devices in the indicator contains lots of duplicates.

Note that even when keeping the bluetooth settings open there are no duplicates there.
Note that something similar happens in the bluetooth settings when executing restarting the bluetooth serve (sudo service bluetooth restart).

Platform Information

• I'm using the latest version from git that I've manually compiled
• I'm using the latest released stable version

Additional context

A first step was taken in this PR:
#17

I cant turn this to visible since the new att, can you fix it?

Launchpad Details: #LP1666349 Pedro Thiago Cutrim dos Santos - 2017-02-21 01:28:44 +0000

the bluetooth indicator disappeared from my notebook for some unknown reason, when I go to check the settings, in the section of "network and wireless" the bluetooth icon is no longer there, I try to start the terminal but I can not, before that bluetooth is very time only looking for devices and when it was found it could not connect. Is there any solution to this problem?

bluetooth working but can not discover device.

and if i send file from smartphone to PC elementary device. PC Detected but can not receive file.
i i do not know i must write issue on wingpanel indicator bluetooth or switchboard bluetooth.

There also a conflict with the device paired. (see the attachment)

Thanks a lot!

Juno

Wingpanel-indicator-bluetooth is installed. Everything works fine from switchboard as well. For some reason the icon is missing.

$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no

If you toggle the gsettings key for bluetooth enabled with dconf, it doesn't change the indicator status

Launchpad Details: #LP1584421 Daniel Fore - 2016-05-22 03:28:16 +0000

Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.

I often encounter this bug while pairing several bluetooth devices to my computer : one or more devices gets duplicated while they have been paired only once. The bug is persistent upon restarts and re-installations. Switchboard display is unaffected. I also noticed that states of duplicates sometimes doesn't match.
I attach screenshots of the issue.

Launchpad Details: #LP1661536 Antoine GRÉA - 2017-02-03 08:55:02 +0000

This issue has a bounty in Bountysource

The $25 bounty on this issue has been claimed at Bountysource.

In Juno, Bluetooth re-enables itself when the computer wakes up from "suspend mode". It stays disabled if restarting the computer, but if you suspend the session and open it back up, Bluetooth is enabled again.

Prerequisites

• I have searched open and closed issues for duplicates.

Describe the bug

When I run wingpanel via the console, "CRITICAL" errors are logged. They look like this:

** (wingpanel:8112): CRITICAL **: 11:20:47.565: Manager.vala:58: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)

To Reproduce

Steps to reproduce the behavior:

1. On a machine that doesn't have bluetooth enabled, run wingpanel via the CLI.
2. Wait for 25s, see CRITICAL logs in the console

To run wingpanel from the CLI, do the following:

• Run killall wingpanel twice (this disables the auto-restart)
• Run wingpanel

Expected behavior

This looks like it should be a debug log, not all machines do have bluetooth capabilities.

Logs

** (wingpanel:8112): CRITICAL **: 11:20:47.565: Manager.vala:58: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)

Platform Information

• I'm using the latest version from git that I've manually compiled
• I'm using the latest released stable version

Additional Context

This is the line the log originates from:

Update CI process for wingpanel-indicator-bluetooth to include a vala-lint step.

see $SUBJECT

This leads to the appdata file not getting installed.

Issue elementary/wingpanel#64 is solved and closed but I have still same problem. It disappears after waking from suspend. If I use killall winganel command, it fixes bluetooth icon.

$ rfkill list
0: tpacpi_bluetooth_sw: Bluetooth
	Soft blocked: no
	Hard blocked: no
2: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
25: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no

$ dpkg-query --showformat='${Package}\t${Version}\n' --show wingpanel wingpanel-indicator-bluetooth
wingpanel		        2.2.5+r269+pkg42~ubuntu5.0.1
wingpanel-indicator-bluetooth	2.1.3+r195+pkg25~ubuntu5.0.1