embeddedsystemclass Goto Github PK

photonlightsensor

Photon Light Sensor is very low intensity light sensor which can be used for biosensor applications or any other area requiring very low intensity sensing.

pick-and-place-lights

picnn

Single-header, lightweight convolutional neural network library written in C++ for Raspberry Pis.

pid

PID controller implementation written in C.

pid-stm32f746

Embedded graphical interface for PID control

pimeter_hardware

Eagle Files for piMeter EnergyMonitor

pipowermeter

Raspberry Pi Power meter

plantscare

PlantsCare is an IoT device for ultra low power standalone capacitive soil moisture meter.

platform-espressif32

Espressif 32: development platform for PlatformIO

platform-nxplpc

NXP LPC: development platform for PlatformIO

platform-ststm32

ST STM32: development platform for PlatformIO

platformio-core

PlatformIO is a new generation ecosystem for embedded development :alien:

plc-panasonic-modbus

Test PLC Panasonic Modbus RTU Master and Slave

plumcore

A modular framework for data logging, remote data acquisition and low power wireless mesh networks.

pocker-3

polarimetry

Polarimeter by C#

ponchos

porpdaq

Design Files for a STM32-Based Underwater Acoustics data acquisition board for harbour porpoises

power_measurement

powermetering

ADE9000 application circuit based power meter

powerspy

PowerSpy is an IoT device for non-invasive two-phases energy monitoring.

powersupply-iotdevices-pcbdesign

Repo consists of the production ready design source file for the Power Supply for IOT Portable Devices

practice_f746gdiscovery

This is some practice code about STM32F746GDISCOVERY

practiceofemwin

many practice code base on emWin

pressure-control-unit-interface-app-code

This code is installed and run in a personal computer to communicate with arduino microcontroller. The code includes functions to set PID gains and send a desired pressure waveform. The code is coded in C sharp (i.e., C++ ) code and can be installed as a standard Windows software, uninstalled in the Control Panel of Windows. Once the software is installed, one can find the program Valve Control Interface and Communication GUI in Start up> All programs. Through a computer, this code talks to an arduino board, which is already downlowed for the embeded code, which will be described in the section 7. The GUI enables the user to interact graphically and control the controller unit. Communication elements such as BAUD rate are easily accessible from the GUI. A graph in GUI shows the current pressure as it is received. Access to a PID controller parametes is allowed and the target pressure can be either constant or varying. The communication is done over a Serial port. Significant parts of this program are segments of open source code found over the internet called ZedGraph (http://sourceforge.net/projects/zedgraph/).

primer1_mems

process-simulator-2-opensource

Open source code of Process Simulator 2

processobserver

Process-Observer - Object-Oriented Internet Machine to Sensors Connectivity (OOI.M2S)

projet-s6

Repo pour le projet S6 - Analyseur de puissance sans fil

proteus