enryit / logtrigger Goto Github PK

It have End Of Line of windows need EOL for linux

Do not use .lua scripts in default config because not all body have lua 
installed in router

In package for openwrt need set propper mode for scripts chmod(775)

What steps will reproduce the problem?
1. cd $OPENWRT_ROOT && mkdir package/logtrigger
2. make menuconfig (and select logtrigger)
3. make
4. (install package or new firmware)

What is the expected output? What do you see instead?
root@OpenWrt:/# /etc/init.d/logtrigger start
'bin/sh: can't open '/etc/rc.common

What version of the product are you using? On what operating system?
root@OpenWrt:/# uname -a
Linux OpenWrt 2.4.37.9 #7 Mon Jun 2 14:00:59 EDT 2014 mips GNU/Linux

Please provide any additional information below.
Removing the ^M at the EOLs will allow it to run
root@OpenWrt:/# /etc/init.d/logtrigger start
root@OpenWrt:/# ps aux
  PID USER       VSZ STAT COMMAND
    1 root      1432 S    init       
    2 root         0 SW   [keventd]
    3 root         0 RWN  [ksoftirqd_CPU0]
    4 root         0 SW   [kswapd]
    5 root         0 SW   [bdflush]
    6 root         0 SW   [kupdated]
    8 root         0 SW   [mtdblockd]
  112 root      1432 S    init       
  143 root      1440 S    syslogd -C16 
  145 root      1420 S    klogd 
  685 root      1436 S    udhcpc -t 0 -i eth0.1 -b -p /var/run/dhcp-eth0.1.pid 
  794 root      1420 R    telnetd -l /bin/login.sh 
  820 nobody     868 S    /usr/sbin/dnsmasq -K -D -y -Z -b -E -s lan -S /lan/ -
  840 root         0 SWN  [jffs2_gcd_mtd4]
  870 root      1432 S    /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1.open
  889 root      1112 S    /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22 
 1493 root      1444 S    /bin/ash --login 
 1542 root      1424 R    ps aux 

Change enable by enabled in config file will be more clear

Purpose feature required:

Create a Variable to pass it to action script with name of logfile where was 
generated message